Autonics TCD210138AA W 21.5 × H 28 mm Analog Timers Owner’s Manual
- June 10, 2024
- Autonics
Table of Contents
Autonics TCD210138AA W 21.5 × H 28 mm Analog Timers
Product Information:
The Autonics ATM series catalog is a range of power ON delay timers. It comes with three different power supply options – 24VDC, 220VAC 50/60Hz, and 110VAC 50/60Hz. The time range can be set to a maximum limit based on the user’s requirement. The control output is relay type and has a contact capacity of 250VAC 3A, 24VDC 3A resistive load. The unit is approved and weighs around 42g.
Features
- Three different power supply options
- Power ON delay timers
- Relay type control output
- Maximum time range setting
- Compact and lightweight design
Specifications:
- Power supply voltage range: 24VDC, 220VAC 50/60Hz, and 110VAC 50/60Hz
- Time unit: SEC, MIN, HOUR
- Contact capacity: 250VAC 3A, 24VDC 3A resistive load
- Approval: Yes
- Weight: 42g (48g packaged)
Product Usage Instructions:
Before using the Autonics ATM series catalog, please read and follow the
safety considerations mentioned in the instruction manual and on the Autonics
website. The specifications and dimensions are subject to change without
notice for product improvement, and some models may be discontinued without
notice.
To select the correct model, follow the Autonics website as the actual product
may not support all combinations. The time range can be set to a maximum limit
based on the user’s requirement, and the time unit can be selected from SEC,
MIN, or HOUR.
The timer can be set using the dial provided, and the output indicator (red)
will indicate when the timer is ON. The power indicator (green) will indicate
when the unit is powered ON.
It is recommended to store the unit in a dry place with no freezing or
condensation. The ambient temperature range for operation is -10 to 50°C, and
for storage, it is -25 to 65°C. The ambient humidity range for operation is 35
to 85%RH and for storage, it is 35 to 85%RH with no freezing or condensation.
The Autonics ATM series catalog is an easy-to-use power ON delay timer
suitable for various applications that require a delay in power supply.
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
The specifications, dimensions, etc. are subject to change without notice for
product improvement. Some models may be discontinued without notice.
Features
- Miniature Size (W 21. 5 × H 28 × L 59.3 mm)
- 4c (4PDT) contact (250 VACᜠ, 3 A)
- High precise time control
- Easy time setting using dial
- Various time ranges : 0.1 sec to 3 hour (11 time ranges, different by models)
- Power supply
- ATM4-2: 24 VDC
- ATM4-5: 220 VAC 50 / 60 Hz
- ATM4-6: 110 VAC 50 / 60 Hz
Ordering Information
This is only for reference, the actual product does not support all combinations. For selecting the specified model, follow the Autonics website
ATM4
- Power supply
- 2: 24 VDC
- 5: 220 VAC 50 / 60 Hz
- 6: 110 VAC 50 / 60 Hz
- Time range
- Number: max. time
- Time unit
- S: SEC
- M: MIN
- H: HOUR
Product Components
- Product
- Instruction manual
Specifications
| Model | ATM4-2 | ATM4-5 | ATM4-6 |
|---|---|---|---|
| Function | Power ON Delay | ||
| Return time | ≤ 100 ms | ||
| Time operation | Power ON Start | ||
| Control output | Relay | ||
| Contact type | 4PDT (4c) | ||
| Contact capacity | 250 VAC 3 A, 24 VDC 3 A resistive load |
Error
| Repeat: ≤ ± 0.5% ± 10 ms SET: ≤ ± 10% ± 50 ms
Voltage: ≤ ± 0.5% ± 10 ms Temp.: ≤ ± 2% ± 10 ms
Approval|
Unit weight (packaged)| ≈ 42 g (≈ 48 g)
Power supply| 24 VDC| 220 VAC 50 / 60 Hz| 110 VAC 50 / 60
Hz
---|---|---|---
Allowable voltage range| 21.6 – 26.4 VDC| 200 – 230 VAC 50 / 60 Hz|
100 – 120 VAC 50 / 60 Hz
Power consumption| ≈ 1.2 W| ≈ 3 VA| ≈ 3 VA
Insulation resistive| ≥ 100 MΩ (500 VDC megger)
Dielectric strength| 3,000 VAC at 50 / 60 Hz for 1 min
Noise immunity| ± 2 kV square-wave noise by noise simulator (pulse width
1 ㎲)
Vibration| 0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1
min) in each X, Y, Z direction for 1 hour
Vibration (malfunction)| 0.5 mm double amplitude at frequency of 10 to
55 Hz (for 1 min) in each X,
Y, Z direction for 10 min
Shock| 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times
Shock (malfunction)| 100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3
times
Relay life cycle| Mechanical: ≥ 10,000,000 operations Electrical: ≥
200,000 operations
Ambient temperature| -10 to 50 ℃, storage: -25 to 65 ℃ (no freezing or
condensation)
Ambient humidity| 35 to 85%RH, storage: 35 to 85%RH (no freezing or
condensation)
Dimensions
- Unit: mm, For the detailed drawings, follow the Autonics website.
- Mount the My socket (sold separately).
Pin arrangement
Unit Descriptions
| No. | Name |
|---|---|
| 1 | Output indicator (red) |
| 2 | Power indicator (green) |
| 3 | Time unit |
| 4 | Dial for the time setting |
18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com
+82-2-2048-1577
sales@autonics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>