defender CH-146 Car Holder User Manual
- June 10, 2024
- Defender
Table of Contents
defender CH-146 Car Holder User Manual
Installing the holder into the CD slot
-
Assemble the holder as you see on the picture below
-
`Put the nut on the hinge
-
Insert the hinge into the clamp inside the thread
-
Tighten the nut
-
Make sure there is no disk in the CD slot
-
Compress the spring with your fingers as shown in the figure with arrows
-
Insert the holder into the CD slot
-
Set a comfortable inclination angle of the magnetic part of the holder. Lock this position by turning the nut clockwise until it stops.
Equipping the smartphone with the metal plate
Equipping the smartphone with the metal plate
-
Remove the protective film from the adhesive part of the plate.
-
Stick the plate on the phone case
-
The plate can also be glued to the smartphone case. Case must be firm and smooth. The plate can not be attached to silicone cases. A **TTENTION!!! Do not stick the plate over the NFC sensor! Do not stick the plate on your smartphone in case it has wireless charging function!
**
-
In case smartphone has NFC or wireless charging functions, stick the plate only on / under the smartphone case or put it under the case (the plate will be fixed only by the case and will not interfere with the wireless charging or NFC function without the case)
-
The metal plate can be placed under the smartphone cover (in case there is no wireless charging and NFC functions and provided that smartphone is dismountable)
-
You can remove the plate by picking up its edges with a thin, dense object.
-
Remove the protective film from the metal plate
Installation of the smartphone onto the holder
Bring the smartphone close to the holder
Terms and conditions of safe and efficient use of the product
Usage precautions:
- Use the product for its intended purpose only.
- Do not disassemble. This product does not contain parts that are entitled to self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center. While receiving the product make sure that it is unbroken and there are no freely moving objects inside the product.
- Keep away from children under the age of 3. May contain small parts.
- Keep away from humidity. Never immerse the product in liquids.
- Keep away from vibrations and mechanical stresses, which can cause mechanical damaging of the product. In case of mechanical damage no warranties are provided
- Do not use in the presence of visual damage. Do not use when the product is obviously defective.
- Do not use the product at temperatures below and above recommended temperatures (-30°C – +50°C), under the conditions of humidity evaporation, as well as in hostile environment.
- Do not put into the mouth.
- Do not use the product for industrial, medical or manufacturing purposes.
- In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement (+16-25°C or 60-77°F) within 3 hours.
- Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device.
Features
- Car CD slot phone holder
- Suitable for phones, smartphones, navigators
Specification
- Mobile device fixation: magnet
- Rotation: 360 °
- Mounting: into the CD player slot
- Material: ABS
- Color: black
IMPORTER: Defender Technology Betoonistr 11, 11415, Tallinn, Estonia. Manufacturer: Yukata Shenzhen Co., Limited. Address: Room A810, Jian Sheng Plaza, Punji Road, Nan Wan Town, Longing District, Shenzhen, China. Made in China. Unlimited shelf life. Service life is 2 years. Date of manufacture: see on the package. Manufacturer keeps the right to change package contents and specifications indicated in this manual. The latest and detailed operation manual is available at www.defender-global.com Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>