boAt Wave Leap Call Premium Bluetooth Calling Smartwatch User Manual

boAt Wave Leap Call Premium Bluetooth Calling Smartwatch User Manual

WAVE LEAP CALL
Thank you for choosing the boAt Wave Leap Call as your fitness transformation companion.

Allow this manual to guide you through the functioning of your smartwatch_ Please read it thoroughly before using it for a smooth sail You may refer to these instructions for later use as well.

• bo At Wave Leap Call xl
• I.68 magnetic charging cable x
• Sty Manual xl
• Warranty Card x 1

CHARGING THE WATCH

The Smart watch must be charged before initial use_ It takes up to 2 hours to be fully charged. Connect and charge the watch with the image below as a reference, using a 5V/2A adapter

TURNING THE WATCH ON/OFF

To turn the watch on/off. long ores.: the side button for 3-5 second:_ You can wake the ;croon by lifting your wrist

CONNECTING TO THE APP

1. Download the Hub app on your phone. Available on both App Store (i0S 13 0 and above) and Google Play Store (Android 6.0 and above) OR
   Scan [OR CODE] (Also available on the watch)
   

2. Connect the °civics with the boAt Hub app

3. Select Wave Leap Ca I on the home :croon of the app and c ick pair to connect

4. To use al; feature: of your Wave Leap Cal seamlessly, tap on ‘yes’ to the ‘connection’ and grant accts.:: system prompt.

5. Turn your phone’: Bluetooth and GPS on

6. Disable battery optimization
   
   

Note. To ensure connectivity throughout your Journey. make sure the app is allowed to run in the background of your phone at all times ‘Phones will not prompt any Information unless you complete Bluetooth pairing with Wave Leap Call.

SYNCING YOUR SMART WATCH TO THE APP

Data Synchronization

• Open the app on your phone_
• Make sure your Wave Leap Call is connected to the app
• Synchronisation will start automatically once you enter the app Interface.

Note: Synchronize data at least once a day to avoid data loss in the watch

NAVIGATING THROUGH THE FUNCTIONS SWIPE FROM RIGHT TO LEFT TO ACCESS THE MAIN MENU

Workout
Choose from multiple sports mode like outdoor run, outdoor walk, indoor walk, outdoor cycle. indoor run, hike. exercise, indoor cycle. elliptical yoga, climbing, trail run, rowing

Tap on any sport mode to start the activity. Press the side button to pause or stop the activity. If the activity is less than 3 mins, it will not be recorded.

Sync your smartwatch to the app to get the detailed analysis

Record
It shows all your workout records

Heart Rate Monitor
Wear the watch on your wrist, then click on tne icon to :tart measurements, You can also view the rata on the app.

Note- Measurements are for reference only and not for medical purposes.

Phone
Tap to check Activity Records of the day. To use the BT Calling feature, open the hub app and pair the watch.

Once paired you will get the pop-up on the app home screen to connect with Phone’s blluetooth.

Click on “pair” to connect with phone’s Bluetooth.

Alternatively, you can go to phone’s Bluetooth settings and pair “LEAP CALL” to start the calling feature on your watch. You can also enable the Bluetooth calling feature from the watch.

Note: Enable call alerts from the setting to get calls on the watch

Up to 10 contacts can be saved In the contact list.

Recent calls will show the latest call details.

Use a dialer to dial any number.

Stress monitoring
Click this option to start the :trot: monitoring. Make sure you wear your watch on your wrist properly to get the accurate result: Analytic of the measurement is

Relax 1-29
Normal. 3059
Medium 60-79
High: 80-100

Note. Measurements are for reference only and not for medical purposes.

Sp02 monitoring
Wear the watch on your yin:A, then click on the icon to :tart measurement: You can alto view the data on the app

**Note- Measurements are for reference only and not for medical purposes.

**

Activity
C:ick on this to check your daily activlty data like :top count, calorie and distance covered.

Brea the
Lick on the breath training Icon to regulate your breathing with the rittruction: given to relax.

Notification
Check your call, SMS and other notifications here

Sleep Monitor

Tap on the icon to review the sleep data of the previous night,

Once the asleep criteria are met, your smartwatch will start recording from 8 pm at night to 10 am In the morning the next day.

Once you lie down and watch detects no movement for 30 minutes it will start recording, and will stop recording if it detects excessive movement

You can check the data on the app only after the awake criteria is met

You can also track sleep scores on the boAt Hub app

Note-‘For accurate sleep data recording, the asleep criteria have to be met which Includes limited movement, wrist positions and angles, and more. ‘The awake criteria will be met only after it records some noticeable movement.

Weather
Connect with the hub app to get daily weather updates on the  watch

Alarm
Tap on this to set an alarm on your watch

Stopwatch
Click on this to start the stopwatch on your watch

Timer
Tap on this to turn on the timer

Music Control
Tap on the remote music control icon on your watch to play music from your phone.

‘Note: Some apps with different protocols might not work.

Camera Control Mode
Tap on the remote camera icon on your smartwatch to click a photo from your phone.

‘Note: Turn the camera on from your phone to use this feature.

Find My Phone
Tap on this icon to find your phone. Once enabled, your phone will start ringing and vibrating_ Tap again to stop It.

Note: Your smartwatch should be connected to your phone via Bluetooth and within Its range for this feature to work

Flashlight
Tap on this to turn your dial into a flashlight

Settings

Brightness
Tap on this to adjust the brightness

Timeout
Adjust the screen awake time

Watch Faces
Tap on this icon to change your watch face.

Vibration
Tao on this to adjust the vibration to strong, normal, weak or off

Time Set
To set date and time

About
Shows the device details

OR code
Scan the OR code to down oadboAt Hub app

Restart ST
It restart: the phone’s BT to ensure better connectivity Tap on this to restart your watch.

Power off
Tap on this to :ye tch your watch off.|

Factory Reset
Tap on this to reset watch data ‘Note: All data will be erased if watch Is reset Are You Sure To Restart?

Swipe down for shortcut menu
You can access DND wake gesture. BT calling, find my phone, flashlight, About device, phone menu and Setting;

Swipe from left to right for notifications
You can check all the notifications from here. Click delete icon to delete all the notification.

Swipe up to access data instantly
You can access daily activity, sleep, heart rate monitor, weather, music player from here.

Heart Rate Monitor
Wear the watch on your wrist, then click on the icon to start measurements. You can also view the data on the app.

Note: Measurements are for reference only and not for medical purposes.

Phone
Tap to check Activity Records of the day. To use the Elf Calling feature, open the hub app and pair the watch.

Once paired you will get the pop-up on the app home screen to connect with Phone’s Bluetooth.

Click on “pair” to connect with phone’s Bluetooth.

Alternatively, you can go to phone’s Bluetooth setting: and pair “LEAP CALL” to start the calling feature on your watch. You can also enable the Bluetooth calling feature from the watch.

Note. Enable call alerts from the setting to get calls on the watch Up to 10 contact: can be saved in the contact list. Recent calls will show the latest call detail:. Use a dialer to dial any number

Product Parameter

MAINTENANCE

Regularly clean your wrist and the strap of the smartwatch, especially after sweating during exorcise or being exposed to substances such as soap or detergent, which may get stuck on the other end of the product
Do not wash the strap with a household cleanser Please use soap less detergent, nnse thoroughly and wipe with a piece of soft towel or napkin.
For spots or stains that are not easy to remove, scrub the area with rubbing alcohol and then follow the above procedure.

Search for the app to connect keeps falling

1. Keep the boAt Hub app updated to the latest version
2. Close all the programs on the watch-►Stop and restart Bluetooth and GPS-
3. Connect again S Check and enable notification functions of your phone and keep the phone and watch in close contact

Note: Make sure your phone system meets Andriod 7.0 and above and ios 13.0 and above.

Stress monitoring
Rick this option to start the :tress monitoring. Make sure you wee your watch on your wrist properly to get the accurate results Analysis of the measurement is

• Relax: 1-29
• Normal: 30.69
• Medium: 60-79
• High: 80-100

Note. Measurements are for reference only and not for medical purposes.

Sp02 monitoring
Wear the watch on your wrist. then click on the icon to :tart measurement: You can also view the data on the app.

Note: Measurements are for reference only and not for medical purposes.

Activity
Click on this to check your daily activity data like :top count, calorie and distance covered.

Breathe
C:ick on the breath training icon to regulate your breathing with the ristructions given to relax.

My Wave Leap Call is receiving no alerts, texts, or phone calls
Make Sure smart reminders on the app are on and synced to the Wave Leap Call. Also make sure your notification center of the phone is displaying message: Only then will your smartwatch also display those notifications Make sure app is running in the background and battery optimization feature on the phone is disabled.

My Bluetooth keeps getting disconnected

1. Make sure there is not more than 7m distance between Bluetooth on the phone .54* the watch.
2. There is no obstacle in between the watch and the phone
3. Make sure the app is running in background.

Which functions of the Wave Leap Call need Bluetooth to work?
Call & Text Notifications. Find My Phone, music control, camera control, weather forecast, cloud and custom watch faces and need Bluetooth connectivity to work.

Will It be okay to take a bath wearing the Wave Leap Call?
The IP68 water resistance will only work under the following conditions’ (1) Maximum depth of water: 1.5m (2) Maximum time for exposure to water: 10 minutes The watch isn’t suitable for hot baths, hot springs, saunas, snorkeling, diving, water skiing and other wading or deep-water activities with high-speed water flow.

SAFETY & PRODUCT INFORMATION

Battery

• Do not disassemble, bore or damage the battery.
• Do not disassemble the built in batteries of non-replaceable battery devices
• Do not use sharp objects to remove the battery.

Health Warning

• If you are wearing a pacemaker or other Implanted electronic devices, please consult your doctor before using the heart rate monitor of the watch
• The optical heart rate sensor will glow green. If you suffer from epilepsy or Sensitive to \ Vs blinking Light Source:, please consult your physician before Wolfing the device .

Notification
Check your call, SMS and other notifications here.

Sleep Monitor

Tap on the icon to review the sleep data of the previous night. Once the asleep criteria are met, your smartwatch will start recording from 8 pm at night to 10 am In the morning the next day. Once you lie down and watch detects no movement for 30 minutes, it will start recording, and will stop recording if it detects excessive movement
You can check the data on the app only after the awake criteria is met You can also track sleep scores on the boAt Hub app Note For accurate sleep data recording, the asleep criteria have to be met which Includes limited movement, wrist positions and angles, and more, ‘The awake criteria will be met only after It records some noticeable movement.

• The device tracks your daily activities through sensors. This data is intended to tell you about your daily activities such as steps, sleep, distance, heart rate and calories, but may not be completely accurate.

The device accessories, heart rate sensor, oxygen level monitor, and other relevant data Is designed for fitness and not for medical purposes. They are not applicable to the diagnosis. monitoring, treatment or prevention of any diseases or symptoms. The heart rate and blood pressure data is for reference only. We’re not responsible for any deviation in data.

Avoid wearing the watch too tightly. Make sure you keep your skin dry – the area that comet in contact with the watch. If symptom: such at redness or swelling appear on your skin, immediately stop using the watch and consult the doctor.

Things to keep In mind

• Sync data everyday days to avoid data loss.
• Water Resistance will not work for seawater, acidic and alkaline solutions, chemical reagents & other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.
• Sports modes support up to 6 hours of exercise at a time.
• Avoid wearing the watch too tight in daily use- Keep the parts of skirt touching the watch dry.
• Keep your arm still while measuring data for accurate measurement,

Disclaimer: This product is an electronic monitoring product and is not intended as a medical reference. We reserve the right to modify or improve any of the functions described in this manual without any prior notice. At the same time, we hold the right to continuously update the product content.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT SUBSTITUTE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection Point. With this little personal effort you contribute to recycle valuable raw materials and treatment of toxic substances.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>