AKAI ABTSW-30 Waterproof Speaker Instruction Manual

: June 10, 2024
: AKAI

Table of Contents

AKAI ABTSW-30 Waterproof Speaker
Product Information
Usage Instructions
PRECAUTION
ACCESSORIES
FUNCTIONS
FUNCTION DESCRIPTION
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AKAI ABTSW-30 Waterproof Speaker

AKAI-ABTSW-30-Waterproof-Speaker-PRODUCT-IMG

Product Information

Model: ABTSW-30
Waterproof speaker
Charging cable and instruction manual included in the package
Reset button, battery indication light, indication light, and mic function available
Can save information from up to 8 Bluetooth devices

Usage Instructions

Before cleaning the speaker, turn it off and disconnect all audio devices. Do not use chemicals like alcohol or benzene to clean the speaker.
Place the speaker on a stable surface when in use to prevent damage from throwing or stepping on it.
Avoid placing the speaker near extremely hot or cold objects.
Use only the original accessories provided by AKAI.
Do not disassemble the speaker without authorization.
To turn off the speaker, press and hold the reset button for 2 seconds.
The battery indicator light shows the status of the battery. When the battery is less than 20%, you will hear a warning sound (di-di). When the battery is less than 5%, the speaker will automatically turn off.
The mic function can be used for calling. Press the mic button once to answer a call and press it again to redial the last number dialed.
The speaker will automatically turn off within 10 minutes when not connected to a device or when Bluetooth is disabled on the connected device.
The speaker can remember information from up to 8 Bluetooth devices. To delete the saved information, press and hold the reset button for 5 seconds.
To pair the speaker with another phone, deactivate the Bluetooth function on the current phone. The blue indicator light will flash rapidly, and you can search and connect to ABTSW-30 on the new phone.
Do not operate both speakers when connected in stereo mode. All control functions are synchronized, so use only one speaker for operation.
If the ABTSW-30 is on the smartphone’s list of Bluetooth devices but cannot connect, press and hold the reset button for approximately 5 seconds to set it to pairing mode. When the blue indicator light flashes rapidly, select ABTSW-30 on the phone for connection.

PRECAUTION

lt is normal if the speaker will get hot during playing or charging.
Please turn off the speaker and disconnect all audio devices before cleaning. Do not use alcohol, benzene, or other chemicals to clean the speaker.
Do not throw or tread on the speaker. Please place it on a stable surface when in use.
Do not place the speaker close to extremely cold or hot objects.
Please use the original accessories provided by us.
Do not disassemble the speaker without authorization.

ACCESSORIES

Charging cable x1
Instruction manual x1

FUNCTIONS

AKAI-ABTSW-30-Waterproof-Speaker-FIG-1

Power ON/OFF
Vol+(Next track)
Play/Pause
Vol-(Previous track)
AWSpairing
Charging port
Reset
Battery indication light
Indication light
Mic

FUNCTION DESCRIPTION

Charging: Please fully charge the speaker for about 4″‘5 hours before first use. (The indicator light will flash slowly, and it will turn green after fully charged.) Use the original charging cable to connect to the power adapter (DC SV/2A) to get charged.
Power On/Off: Long press the power button” until the blue indicator light flashes, then release the power button, the speaker turns on with a prompt tone
Bluetooth Pairing: After being turned on, the blue indicator light keeps flashing quickly. Then open your smartphone’s Bluetooth function, search for a new device, and choose “ABTSW-30″. After successful pairing, you will hear the”di-di” prompt tone. Now you can play music on your smartphone with this speaker.
Automatic Connection: If you previously paired with a phone, tablet or other Bluetooth devices. when you turn on the speaker(not for the first time), it will automatically pair with the last connected device .
When you are playing music via Bluetooth, short press” + ” to increase the volume, long press 3s” + “to listen next song
When you are playing music via Bluetooth, short press” “to decrease the volume and long press 3s “ **** ” to listen to the previous song.
When the speaker is connected to a 10S device, the volume control is synchronized.
After being paired successfully, short press” “to play and pause.
After paired successfully, when there is an incoming call, short press the” button to pick up the call within the speaker, long press the” ” button for 2 seconds to reject this call, and when answering the call, short press the” “button to end it. Redial: double press the “button, your smartphone will redial your last dialed number.
Automatic Power Off: The speaker will turn off in 10 minutes in the below situations to save battery power
- A: The device is not connected
- B: The phone is out of transmission range.
- C: The Bluetooth is turned off on your phone.
Pair to another smartphone: Method A: Turn off smartphone A’s Bluetooth function, you will hear theffdi~di”prompt tone and the blue indicator light will turn to flash quickly. Then smartphone B can search for”ABTSW-30″ and choose it to pair. Method B: Long press the” “button for 3 seconds until you hear the “di-di” prompt tone, and the blue indicator light will turn to flash quickly, which means that smartphone B could search for “ABTSW-30 “and choose it to pair.
Clear Paired Information: The speaker can remember up to 8 device’s pairing information, if you need to clear this information, turn on the speaker, and long press the” button for 5 seconds until you hear the “di – di” prompt tone and the pairing information list is cleared.
Akal stereo connection : Power on the two speakers, do not pair it with your phone, first short press the” “button of either speaker to set them into the Akai wireless stereo pairing mode (not available when playing music, please pause the music first), and the blue indicator flashes twice with “di-di” prompt tone after paired successfully. Under Akai wireless stereo mode, short press the” “button of either speaker to disconnect the Akai wireless stereo connection.
Low Battery Warning : When the speaker’s battery is less than 20%, you will hear the “di-diff prompt tone, then please charge the Speaker with the original charging cable (DCSV/2A). When the battery is less than 5%, it will turn off automatically.
Product Charging: Use the original charging cable to connect to the power adapter(DC 5V/2A) to get charged.(DC 5V/2A, 4-5 hours, the indicator light will flash slowly, and it will turn to green after fully charged)
If the speaker will not be used for a long time, please fully charge it at least once a month to avoid decreasing the speaker’s battery life.
Note : When speakers are connected in AKAi wireless stereo pairing mode, all the control functions are synchronized, so please only operate one of them.

TROUBLESHOOTING

The”ABTSW-30″ device is in the smartphone’s Bluetooth device list but failed to connect. Reason A: The speaker is not in pairing mode Solution: Long press the” ” button for about 5 seconds to set it to pairing mode, when the blue indicator light flashes fast, choose”ABTSW-30″ to pair. Reason B: The speaker’s paired information has been cleared. Solution: Delete the device”ABTSW-30″ from your phone, then search “ABTSW-3011 and choose it to pair again.
The smartphone could not search “ABTSW -30″ Reason: The speaker is not in pairing mode. Solution: Long press the” button for about seconds to set it to pairing mode, when the blue indicator light flashes fast, choose”ABTSW -30″ to pair.

TECHNICAL SPECIFICATIONS

Power source: 5V
RMS Power: 22W
Bluetooth version: BT5.O
Bluetooth channel emission power: 2DB
Bluetooth frequency: 2,4 GHz – 2.48 GHz
Bluetooth action range: 10M
Battery type and voltage: LI -Ion 4400 mAh
Speakers: 1ow*2
Frequency Response: 50Hz-18kHz
Waterproof certification: IPX7
Playing tlmeat50% volume: 15h
Charging time: 4.5-Sh
Product dimensions: L180W76H61mm
Product weight: 394g
GB dimensions/weight: 205101 72mm /191g
CB dimensions /weight/nopes: 525425168mrn/800g*20pcs

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the product or packaging means that the product should not be treated as household waste. Do not throw garbage at the end of its life but take it to a collection center for recycling. In this way, you will help to protect the environment and be able to prevent any negative consequences that it would have on the environment and human health.