POWER EQUIPMENT DIRECT PS-C22 Combination Backup and Primary Pumps User Manual

POWER EQUIPMENT DIRECT PS-C22 Combination Backup and Primary Pumps

Features

• Pre-Assembled for quick and easy installation
• The compact footprint fits neatly into most sump pits
• Automatically switches to battery power when AC fails
• A unique monitoring controller detects irregularities, sounds an alarm, and pinpoints problems and solutions on the control panel
• Primary pump with energy efficient PSC motor is continuous duty rated and water-cooled
• The primary pump controller allows for adjustable pump run time and exercises the pump weekly to extend pump life
• Dual float switches provide dependable activation for both primary and backup pumps
• The backup will assist the primary pump if excessive amounts of water are entering the sump
• Maintains and recharges battery automatically
• The alarm can be silenced during a power outage
• Designed for use with wet cell or AGM / maintenance-free batteries
• USB Data Port and Remote Terminals connect to external devices such as a Pro Series CONNECT
• Module, home automation systems, or other devices for remote notification

Backup Pump Monitoring

Connect

The Pro Series CONNECT Line of Pumps have the ability to send email or text notifications when there is an issue or needed maintenance.

Notification with the USB Data Port:

• With USB data port simply plug/attach the Pro Series
• CONNECT Module to your Pro Series 1850 Backup system and the module will act as a gateway to the internet
• Receive specific text or email alerts telling you exactly what is going on in the home

Notification with the Remote Terminal

• Connects to home security, autodialer, or another dry contact-based device

Now, you can ‘be in the know when you’re on the go’.

Specifications

Pump Construction

Primary Pump

• Permanent Split Capacitor (PSC) motor
• Upper and lower sealed ball bearings
• Cast iron/ cast aluminum housing
• Electroplated steel shaft
• Dual carbon ceramic shaft seals plus additional Buna-N seal
• Engineered polymer impeller
• Stainless steel fasteners

Backup Pump

• Non-corrosive ABS housing
• Stainless steel shaft and fasteners
• Rulon seal
• Non-corrosive ABS

Included with System

• Pre-assembled:
  • Primary pump
  • Backup pump
  • (3) 14 Standard no hub couplings
  • (2) Standard check valves with hardware
  • Sump Foot raises and secures both pumps
• Backup system controller/charger with fluid sensor
• Primary pump Enhanced controller with caged dual float switch (DFC1.5)
• Battery box

Features

• ST1033 Primary- Cast Iron/Cast Aluminum Construction
• Activates pump to exercise and extend pump life
• The primary pump run time is adjustable
• A unique monitoring controller sounds an alarm if maintenance is needed
• USB Data Port and Remote
• The terminal allows the unit to connect to one of many devices

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>