Godox UL150II Silent LED Light User Guide

Godox UL150II Silent LED Light

Name of Parts

Light Body

1. Light Body
2. Ventilation Hole
3. Bowens Mount
4. Protection Cover
5. LED Bead
6. Umbrella Input
7. Umbrella Fixing Knob
8. U-bracket
9. Bracket Fixing Knob
10. Bracket Sleeve
11. Handle
12. DC Input Port
13. Mount Fixing Pusher

Controller

1. USB Type-A Port
2. .SET Adjustment Dial
3. Power Switch Button
4. MENU Button
5. Lock/FX Button
6. DMX Setting Button
7. .Black Battery Removal Button
8. V-mount Battery Box
9. AC INPUT Port
10. DC 48V Port
11. Yellow Battery Removal Button
12. DMX IN XLR Port
13. DMX OUT XLR Port

What’s in the Box

Separately Sold Accessories

Installation and Disassembly Guide

Connect the controller and the light body
Press and hold the spring latch button of the connecting cable, insert the connecting cable into the DC INTPUT Port of the light body, then insert the other end of the connecting cable into the DC OUTPUT Port of the controller to complete the connection.

Mount on the tripod Adjust the light body to a proper angle, rotate the screw of sleeve knob to install the light body on the tripod, then rotate the screw of sleeve knob to fix the light body on the tripod. The inclination angle of the light body could be adjusted by loosening the bracket angle adjustment handle and then screwing down the handle afterwards.
Note: The tripod belongs to separately sold accessories.

Mount on the light stand Loosen the handle of the controller clamp, then insert the light stand and rotate the handle to tighten. Finally, insert the V port of the controller into the clamp slot.
Tip: Press and hold the mount fixing pusher can easily remove the controller.

lnstallation and disassembly the protection cover

• Installation : Press the Mount Fixing pusher top-down, put the protection cover on Bowens Mount, and rotate clockwise to tighten it.
• Disassembly : Press the Mount Fixing pusher top-down, then rotate counterclockwise to remove it.

Note: Make sure to remove the protection cover before use to avoid overheating damage. Put on the protection cover to protect the lamp when not in use.

Installation and disassembly the standard reflector

• Installation: Press the Mount Fixing pusher top-down, put the reflector on Bowens Mount, and rotate clockwise to tighten it.
• Disassembly : Press the Mount Fixing pusher top-down, then rotate counterclockwise to remove it.

Connect to DMX Controller
The connecting operation diagram of Controller ULCl 5011 and DMX Controller is as follows:

Power Supply

1. AC Power Supply Note : Please press the latch button when installing or disassembling the power cable and connecting cable.
2. V-mount battery power supply Note: The light can be supplied by 14.SV or 26V V-mount battery. Only the side with yellow battery removal button supports unilateral power supply. When it is powered by two batteries and one of which is low, the device still can’t work normally even if the other one is full. The corresponding battery icon will blink in low battery mode. It is recommended to check whether both batteries have sufficient power when using two batteries.

Display Screen

Controller ULCl 5011 Operation Instruction

1. Turn On/Off Press the controller Power Switch Button for 7 second after connecting to the power supply to turn on or off.
   

2. Brightness Adjustment Turn the SET adjustment dial on the main interface to adjust brightness from 0% to 00%. Rotate clockwise to increase brightness, and counterclockwise to decrease brightness. The brightness will increase or decrease by l unit in normal rotation speed; and increase or decrease by 10 unit in rapid rotation speed.
   Note: Short press the SET adjustment dial once on the main interface to turn off the light, press again to turn on and display the previous brightness.

3. Menu Setting
   Short press< MENU> Button to enter the menu interface, displayed in order with Wireless, Bluetooth, DMX,Dimmer, Screen Bright, Language, Reset, Version & Upgrade.Turn and short press the SET adjustment dial on the menu interface to select and enter the corresponding setting options interface.

   • Wireless
     The Wireless interface is displayed in order with Wireless Switch, Channel, Group and ID. Short press & turn the SET adjustment dial to complete the settings of Wireless Switch, Channel, Group and ID.

   • Bluetooth
     The Bluetooth interface is displayed in order with Bluetooth Switch, Reset and MAC Code.
     Short press & turn the SET adjustment dial to complete the settings of Bluetooth Switch and Bluetooth Reset. For more smartphone APP operations, please open the ‘help’ in “Godoxlight” APP to gain detailed guidance (both Android and IDS systems are available).
     Note: the APP can be used directly on the firstly installed device (smartphone or tablet). When changing to other mobile device, the light shall be reset before the normal usage of APP.

   • DMX The DMX interface is displayed with Address. Turn the SET adjustment dial to choose address from OFF or 1-512, the light will be in DMX OFF or ON mode respectively. Afterwards, short press the SET adjustment dial to return to the previous menu interface.

DMX Practical Form

Dimmer

• Turn the SET adjustment dial on the Dimmer interface to choose linear/S-curve/exponential/logarithmic dimming curve.

Screen Bright

• Turn the SET adjustment dial on the screen bright setting interface to choose 1, 2, 3 levels of screen brightness.

• Language
  Turn the SET adjustment dial on the Language interface to choose English or Simplified Chinese.

• Reset
  Turn the SET adjustment dial on the Reset interface to choose “Yes” or “No” and short press to confirm. If you choose “Yes”, the system will initiate resetting program and resetting progress bar is displayed on the screen, after which it will return to the main interface.
  Note: The brightness will change to 100% after resetting.

• Version & Upgrade
  The Version Code displayed on the Version & Upgrade interface is the firmware version of the product

Light Effect Setting

Short press <&/FX> button to enter FX light effect interface, turn the SET adjustment dial to choose flash, lightning, broken bulb or TV scenes

Note: Short press the SET adjustment dial to change the rate (I, II, 111) and adjust brightness (0%-100%) after choosing one of the above Light Effects.
Tips: Long press the < &/FX > button to lock/unlock the screen.

Connecting Cable Issue

When the connecting cable is not correctly connected to the light or controller, a separated icon of connecting cable and device is displayed on the panel. Please check the connecting ports of the controller and light

Switch from AC Power Supply to V-mount Battery

Power Supply
Unplug the power cable and install V-mount battery then turn on the product.

Note: If you install the V-mount battery before unplugging the power cable, and the brightness value is set higher than the maximum brightness that the battery can be turned on, then you switch to V-mount battery power supply by unplugging the power cable, the light and the controller will automatically power off The machine can only resume normal operation after reboot.

Maximum Brightness in Different States

CT mode: Maximum Brightness(%) FX mode: Maximum Brightness (%)

Note: The dimming curve is not adjustable in FX mode, it is linear in default. The above data is based on 26V 270Wh 1 0.5Ah battery and 14.SV l 50Wh 1 0.2 Ah battery.

Software Upgrade

1. Download the new firmware to the U disk from the official website (http://www.go­dox.com.cn/Downloads.html).
2. Turn off the device. Insert the U disk with new firmware into the USB upgrade port.
3. Turn on the device, and it will automatically enter the upgrading interface.
4. lt will return to main interface after completion.

Notes:

1. New firmware must be downloaded from the official website, and keep only one BIN file in the root directory of the USB disk.
2. The USB port can only support firmware upgrade function.

Maintenance

product, except consumables e.g. adapter and power cable, is supported with a one-year warranty.
Maintenance of the light must be performed by our authorized maintenance department which can provide original accessories.
Unauthorized service will void the warranty.
If the product breaks down or gets wet, please do not use it until repaired by professionals. If there is anything abnormal during LED light’s working, please turn it off immediately and identify the reasons.

Declaration of Conformity:

GODOX Photo Equipment Co,Ltd. hereby declares that the This equipment are in compliance with the essential requirements and other relevant provisions of EU Directive 2014/53/EU. They are allowed to be used in all EU member states.
For more information of Doc, Please click this web link: http://wwwgodox.com/DOC/Godox_UL150II_DOC.pdf.

Technical Data

llluminance Testing Data

FCC Statement

device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.
  Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you1

Product

I nformation

| Model| Product Code Number
---|---|---
Customer Information| Name| Contact Number
Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:

Note: This form shall be sealed by the seller. I Applicable Products The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases ·
The guarantee and service offered by this document are not applicable in the following cases: ()} The product or accessory has expired its warranty period; ®· Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; ®· Breakage or damage caused by non- authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; @. The original identifying information of product or accessory is modified, alternated, or removed; ®· No valid warranty card;®. Breakage or damage caused by using illegally authorized, nonstan­dard or non-public released software;®· Breakage or damage caused by force majeure or accident;®· Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsi­ble parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>