Fonu iPhone XS Case with Power Bank Instruction Manual
- June 10, 2024
- Fonu
Table of Contents
Fonu iPhone XS
Case with Power Bank
Instruction Manual
Product Diagram
Battery charging directions
- By connecting the battery and the power supply with a USB cable.
- Put the battery case upon the wireless charger, if not working, please check whether the position is right upon the receiving area.The white LED lights show the current electricity, if 4 led lights on, it meons full charged.
Phone charging directions
- Connect the phone with the battery case, long press the switch tor 3s to turn on/off.
- While charging the phone and battery at the some time, phone will have priority.
Caution
| Wilh the 5flcter lobel support Meleu receiving luncllon
---|---
| Only the oudlo model Is compatible wllh origlnal llghlnlng headset and
charging slmullaneously.
Installation Instruction
First bend the top soft TPU bockwards, then gently slide the phone lnto the case until the connector perfectly fit the phone, cover the top to finish instollation.
Disassembly Instruction
First bend the soft TPU bockwards0then push the phone horizontolly upwords to
finish the disassembly.
Attention: The middle side of this product both hard plastic, please assemble / dlsoseemble your phone horizontally.
LED Indicator
Product Specifications
| Sultable for: IPhone Series | Battery Type: Grade A+Ll-polymer |
|---|
Package Contents
| External 8attery CaseXl | User Manual Xl |
|---|
Wamings
- Make sure this product is fully charged prior to use.
- Do not place metal or other foreign objects on the wirelss charging area.
- Keep out of reach of children.
- Avoid severe fall of the cases ,extrusion etc, stop using it immediately if meet any unusual phenomenon.
- Alwoys keep the product dry and clean.
- Do not use the product in high temperotures ,Heat dissipation,short-circuit environments.
- Use the originol co bie and charger for your device when charigng it for this product.
- Do not disossemble or reploce any accessories.
- lt is normal phenomenon of getting warm during the charging process.
- The bottery should be charged at least every three months to avoid shortening the bottery life.
Wireless receiving battery case manual
lnstallation / Removal
Bend the upper soft TPU part, slide the iPhone from the top TPU part to the bottom, and slide the iPhone out vertically.
lf you can’t charge, please clean up the dust inside the charging port of the phone.
Warning !!!
Do not remove phone by force, it will damage charging port.