ANNEX K1191413773 Multi Function Car Air Pump Instruction Manual

October 29, 2023
ANNEX

ANNEX K1191413773 Multi Function Car Air Pump

K1191413773 Multi Function Car Air Pump

Thank you for using our products, which are suitable for the inflation of vehicle tires and the inflation of gas storage items.

Instructions for use:

  1. Before using the air pump, park the vehicle in a safe position and ensure that the vehicle is safely parked. When an air pump is required, the car engine is first started to operate normally. (to obtain sufficient power to prevent car batteries from running out of power)
  2. When using the air pump, first plug the air pump power cord into the car cigarette lighter (DC 12V 1 0A-1 SA)
  3. Align the air nozzle on the air pump hose with the air nozzle of the tire to check for air leaks and ensure that the air nozzle is fully fastened without air leakage.
  4. Turn the switch on the air pump to the closed position and the air pump is energized and starts normal operation. The air pump works with high temperature and high pressure gas, and the body heat is normal. Do not touch the inflation hose with force after use. Be careful with hot hands! (Note: preset pressure type air pump, please set the pressure first, the electronic watch has a memory function, it will remember the current set pressure for the next use)
  5. When inflating, please pay attention to the pressure value change of the air pressure gauge on the air pump. When the pressure reaches the required pressure, please turn the switch to the off state (the preset pressure section pressure will automatically stop when it reaches the set pressure). The air pump nozzle is removed from the tire and the inflation is completed. (Ordinary car tire pressure is 2.3-2.Skg, 28-35psi)
  6. The air pump comes with a number of included nozzles for
    lifebuoys, balloons, inflatable toys, and other inflatable products. To inflate a car tire, simply connect the nozzle on the air hose to the tire nozzle.

Precautions:

  1. When using the air pump, please start the car engine to increase the power.
  2. Only use 12V DC power supply and the power supply is 120W. It is forbidden to use AC power.
  3. To ensure maximum life of the air pump, it should be shut down and cooled for 15 minutes every 5-10 minutes of continuous operation.
  4. When using the air pump, please pay attention to the pressure change. This product is an electric appliance. Do not let it operate alone without being taken care of.
  5. When the air pump is not working properly, please check if the car cigarette lighter is conducting well, and the fuse in the cigarette lighter plug on the power cord is blown. If the fuse is blown, replace the fuse of the same specification (1 OA) and continue to use.
  6. Do not allow children or people with disabilities to use this product to avoid injury.
  7. When using the air pump, remember to keep away from the humid environment and severe sand environment to prevent water dust from entering the motor and causing damage to the motor.
  8. Do not expose this product to extreme conditions (such as rain and long periods of exposure to sunlight).
  9. Do not immerse the product in water, as this will cause damage to the internal circuit.
  10. Do not use this product near vapors and stoves to avoid damage.
  11. When the air pump is over the end of its life, do not discard it. It must be placed at the designated collection point.

Product specifications:

Rated voltage: DC 12V Current: 1 OA Maximum power: 120WWire length: 3m ± 0.2m
Unit conversion: 1 BAR= 14.5 PSI= 10.2kgf /cm2 = 1 00kpa barometer:
Preset pressure gauge: Press+ or- button to adjust the pressure  until the digital flashes and then release. After the value stops jumping and disappears, the pressure is set successfully. Press+ or- to display the current set value. Wait for the pressure value to be set before the air pump switch can be turned on. Otherwise, the setting is invalid. The air pump automatically remembers the pressure value that is currently set successfully. It does not need to be reset after the next use. Press the “Unit or “R ··button to switch the air pressure unit. Ordinary car tire pressure is 28-35 psi.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals