TELCARE Wireless Blood Glucose Monitoring System User Guide
- June 10, 2024
 - TELCARE
 
Table of Contents

TELCARE Wireless Blood Glucose Monitoring System
Telecare Blood Glucose Monitoring System
The Telecare Blood Glucose Monitoring System is a device used to monitor blood glucose levels. It includes a glucose meter, lancet device, test strips, and control solution.
Product Usage Instructions
- 
Before using the glucose meter for the first time, charge it for at least 3 hours with the AC charger included in your kit.
 - 
Clean and disinfect your lancing device after every use. Clean and disinfect your meter at least once a week. Refer to the details in the user manual for instructions.
 - 
Wash your hands and the testing site with warm water and soap.
Dry your hands well. - 
Turn on the glucose meter using the power button.
 - 
When the Insert Test Strip screen appears, insert the Telecare test strip. Continue to push the strip in until Apply Blood appears.

 - 
Insert a new lancet into the lancing device and twist off its plastic cap.

 - 
Adjust the cap to your desired puncture depth level.

 - 
Using your thumb, push the sliding button back. You will hear a click, indicating that the lancet carrier is locked into position.

 - 
Position the end of the device against the side of the fingertip. Press the trigger button to actuate the lancet.

 - 
Make sure the Apply Blood screen is displayed. Touch the tip of the test strip to the blood drop until the end is filled.

 - 
Your test result will display.
 - 
Highlight a reading tag using the down button. Enter the reading tag by pressing the middle button
 - 
Remove test strip to send data to MyTelcare.com.
If there is no data connection, move to a different location to get a cell signal, go to History, highlight unsent reading, and press the middle side button to send. - 
Log in to MyTelcare.com to:.
- View blood glucose readings
 - Invite caregivers
 - Set up messaging options
 - Create target zones
 - Print data
 
 
Contact Telecare customer service at 888-666-4530 (US) or (1) 978-610-4688 (International) if you have any questions or comments.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>