LiFE Glass Bathroom Scale with Body Analysis and Bluetooth Function User Manual

LiFE Glass Bathroom Scale with Body Analysis and Bluetooth Function

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.

Read the operating instructions carefully before putting the appliance into operation and keep the instructions, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

USER MANUAL SYMBOLS
Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:
WARNING: This sign warns you of dangers to your health and indicates possible injury risks.
CAUTION: This sign refers to possible hazards to the machine or other objects.
NOTE: This sign highlights tips and information

SAFETY INSTRUCTIONS

WARNING:
Do not immerse in water during cleaning. Please note the instructions provided in the section “Cleaning”.

CAUTION:

1. The device is designed exclusively for private and not for commercial use. Only use the device for the intended purpose.

2. Keep away from heat, direct sunlight, damp (never immerse in liquids) and sharp edges.

3. Place in a dry place.

4. Only use the appliance on a hard, flat and dry surface.

5. Do not try to repair the appliance on your own. Always contact an authorized technician.

6. In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

7. Do not allow small children to play with the foil. There is a danger of suffocation! WARNING: If the weighing surface is damp or if there are drops of water on it, first wipe it dry or them off. Slip hazard!
   CAUTION:

   • Handle the balance with care, as it is a precise measuring instrument. Do not drop it or jump on it.
   • Do not load the appliance with more than 180 kg, to avoid damaging the device.
     If the scale is carried or is going to be stored, please store it only in a horizontal position.

INSERTING THE BATTERIES

1. Open the battery compartment on the underside.
2. Insert 3 batteries of type AAA. Please ensure that the polarity is correct
3. Close the battery compartment again.
4. If the message “Lo” appears on the display, replace the batteries.

WARNING:

• Do not expose the batteries to high temperatures or direct sunlight.
• Keep batteries away from children. They are not a toy. Batteries may be swallowed, which can be life-threatening. If a battery has been swallowed, seek medical help immediately.
• If the device is not used for a prolonged period of time, please remove the batteries in order to prevent leakage of battery acid.

WEIGHING FUNCTION

1. Place the scale on a hard, flat surface (avoid carpets). An uneven floor contributes to inaccurate measurements.
2. Stand on the scales with both feet. The device switches on automatically.
3. At this time, the LED display will show “0.0”. Distribute your weight equally and wait for the scale to determine your weight.
4. Step off the scale and the data continue to show for a few seconds. Then, the appliance will turn off automatically.
5. The digits on the display will flash before your exact weight will be shown.
   NOTE: The scale is factory set with the unit “kg”. The change to “lb”, can be made only through application. When the application change into “lb”, the scale will also show the lbs.

AUTOMATIC SWITCH OFF
The power will shut down automatically after no operation is detected for about 10 seconds. Note: In case the weight lies above the allowed maximum weight, the signal of error “EEEE” will appear on the LED display.

CLEANING

CAUTION:

• Do not immerse the scale in water: electronic components can be damaged.
• Do not use a wire brush or any abrasive items
• Do not use any acidic or abrasive detergents.
• Clean the device with a slightly moist cloth. Make sure that the no humidity or waters seeps into the device.
• Use a commercially sold detergent or soap for cleaning.
• Dry the device well after cleaning with a dry and soft cloth.

INFORMATION ON BLUETOOTH

1. Bluetooth is a technology for remote wireless connection of devices over a short distance.
2. Devices with Bluetooth Standard transmit in the ISM-Band (Industrial, Scientific and Medical) between 2.402 and 2.480 GHz. Interference maybe caused e.g. by WLAN networks, DAB radios, cordless phones or microwave ovens that operate in the same frequency range. This scale offers you the possibility of sending the calculated data via Bluetooth to your smartphone or tablet PC.

You can download the free app, OKOK•International, via the Apple Store or the Google Play Store.

SYSTEM REQUIREMENT FOR USE OF THE APP:

1. iOs 6.0 or higher+ Bluetooth 4.0 or higher
2. Android 4.3 or higher + Bluetooth 4.0 or higher

INITIAL USE WITH THE APPLICATION

1. Activate Bluetooth in the settings of your device.
2. Install the app “OKOK·International” from the corresponding App Store.
3. Switch on the scales by gently exerting pressure on the weighing surface with your foot.
4. Start the app. Enter your user details (e-mail, password) in the app. (figure 1)
5. Press “Pair” on the Device menu to connect the devices to each other. (figure 2)
6. Perform the measurement as described in the section, “Use / Measurement and Analysis».

MEASUREMENT AND ANALYSIS

Record your personal data.
First press “Go” in the app to begin the weight measurement process. After the measurement, the application will display your profile and all parameters, such as: (figure 3)

• The weight in the previously selected unit(kg/lbs)
• The Body Mass Index
• The body fat proportion in %
• The proportion of muscle mass in %
• The proportion of body fluid %
• The visceral fat
• The bone weight
• The basal metabolic rate of the daily energy requirement in kcal

Click on one selected parameter, such as “BMI” on main screen, APP will display details about it and an assessment of your results according to specified values. (figure 4)

ASSESSMENT OF THE RESULTS

BODY MASS INDEX (BMI)
BMI is broadly used to asses if a person is at a healthy weight for his or her height because BMI is a number based on ones’ weight and height. With BMI number, a person can assess if he or she is at risk for health problems such as heart disease, diabetes, etc. Generally, table 1 gives a usually reference for health situation assessment using BMI.

BODY FAT

BODY FLUID
Water is a main component in human body, but the percentage of body water varies with age and gender. However, it is important to maintain a percentage of water in the body over 50%.

VISCERAL FAT

Visceral fat is fat located in the abdominal cavity, which surrounds the internal organs. To a certain degree, it can be attributed to abdominal fat. It is not directly visible, but comprises a part of the abdominal volume. This fat acts as a reserve during food shortages.

BMR (BASAL METABOLIC RATE / ENERGY EXPENDITURE).
The Basal Metabolic Rate (BMR) characterizes the energy expenditure. The energy expenditure is used to describe the amount of energy in KCAL that the body requires per day during complete rest, at an indifference temperature (28-30°C) and on an empty stomach for the maintenance of its function (e.g. while sleeping).
Reference values of the daily intake of kilocalories with-out physical activities

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>