DERYAN Rolo Baby Carrier User Manual
- June 10, 2024
- DERYAN
Table of Contents
DERYAN Rolo Baby Carrier
Rolo Baby Stroller
The Rolo Baby Stroller is a safe and reliable product designed to transport babies and young children. Please read the following instructions carefully before use to ensure the safety of your child.
Languages
The user manual is available in 4 languages: English, Dutch, French, and Spanish.
Warnings
- Failure to follow these instructions could result in serious injury.
- Make sure all latches are locked before use.
- Avoid serious injury from falling or slipping.
- Always use the restraint system and ensure that children are placed according to these instructions.
- Make sure the stroller is fully opened, securely locked in place, and that wheel brakes are engaged before allowing children near the stroller.
- During loading and unloading of children, always engage the parking brake.
- The maximum weight of a child for which the product is designed is 22 kg per seat.
- Never use this stroller to transport more than 2 children at a time.
- Never leave your child unattended.
Maintenance
- To ensure your baby’s safety, regularly check and maintain the stroller.
- Use a brush to clean the covers and a neutral cleaner or natural sea powder to clean them.
- Check the product regularly for missing or broken parts or thread wear. Replace damaged parts if necessary.
- Operate or disassemble the stroller according to the instructions.
Parts
- Canopy
- Bumper bar
- Harness
- Unlocking button
- Footrest
- Footrest adjustment button
- Folding lock
- Rear wheel
- Front wheel
- Basket
Installation
Folding Lock
To unfold the stroller, remove it from the box and unlock the folding lock. Lift the handle until the tube clicks into place.
Brakes
To engage the brakes, press on the brake lever. To release them, press on the back of the lever.
Bumper Bar Installation
Click the bumper bar into the plastic housing, making sure it clicks into place. Press the unlocking button to release the bumper bar.
Adjusting Footrest
To adjust the footrest, press the two buttons on either side and place the footrest in the desired position.
Securing Your Child
To unlock the buckle, press the middle button and remove the ends from each side. To secure your child, attach the harness at the appropriate height by threading the plastic ends through the slots. Make sure both straps are at the same height.
Canopy
To extend or retract the canopy, pull or push it forward or backward.
Folding
To fold the stroller, push the secondary lock on the handlebar to the left and
press the button on the inside of the handlebar. Push the handlebar forward
and guide it slowly toward the back wheel.
Following these instructions will ensure that your baby’s safety is a top
priority when using the Rolo Baby Stroller.
!IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCES!
Warning
- Failure to follow these instructions could result in serious injury.
- Make sure all latches are locked before use.
- Avoid serious injury from falling or slipping.
- Always use the restraint system and ensure that children are placed according to these instructions.
- Make sure the stroller is fully opened, locked securely in place and the wheel brakes are engaged before children approach the stroller.
- The parking device must always be switched on when loading and unloading children.
- The maximum weight of a child for which the product is designed is 22 kg per seat.
- Never use this pushchair to transport more than 2 children at the same time.
- Never leave your child unattended.
Maintenance
- To ensure the safety of your baby, please check the maintenance regularly and maintain it properly.
- Use a brush to clean the covers, use neutral detergent or the best natural soap powder to clean.
- Regularly check the product for loss of parts, broken parts or wire wear. Replace damaged parts if necessary.
- Operate or disassemble the pushchair according to the instructions for use.
Components
- Canopy
- Bumper bar
- Bumper bar
- Harness system
- Release button
- Footrest
- Footrest adjust button
- Folding lock
- Rear wheel
- Front wheel
- Basket
Product Installation
Unfolding the stroller
Take the frame out of the box, unlock the folding lock. Lift the handlebars
until the tube clicks into place.
Installing the front wheel Slide one front wheel into the front wheel housing until it clicks into place. Repeat for the other two wheels. Pull on the wheels to ensure they are installed properly.
Installing the rear wheel
Slide the rear wheel into the rear wheel housing until it clicks into place.
pull the wheels to ensure they are correctly are installed.
Rear wheel brakes
To engage, push down on the brake lever. To release push down on the back of
the brake leaver.
Installing the bumper bar
Click the bumper bar into the plastic housing and make sure it is locked in
place. Press the release button to unlock the bumper bar.
Adjusting the footrest
To adjust the footrest, press the two buttons on both sides and place the
footrest in the desired position.
Securing seated child
To unlock the buckle, press the center button and remove the ends of each
side.
Securing seated child
Attach the harness at the correct height by threading the plastic ends back
through to cross the slots. Make sure both tires are the same height.
Canopy
Pull the hood forward to stretch out. Push back to fold.
Adjusting the seat
Grab it with one hand tilting mechanism and with the other hand the plastic
D-ring on the Belt. Squeeze the reclining mechanism and push or pull to the
desired position.
Folding the stroller
Push the secondary lock on the handle to the left and press the button on the
inside of the handle. Push the handle forward and slowly guide it towards the
rear wheel.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>