boAt Wave Beat Call Bluetooth Calling Smartwatch User Manual
- June 10, 2024
- Boat
Table of Contents
- boAt Wave Beat Call Bluetooth Calling Smartwatch
- PACKAGE CONTAINS
- CHARGING THE WATCH
- TURNING THE WATCH ON/OFF
- CONNECTING TO THE APP
- SYNCING YOUR SMARTWATCH TO THE APP
- Settings
- System
- PRODUCT PARAMETERS
- Maintenance
- FAQ
- SAFETY &PRODUCT INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
boAt Wave Beat Call Bluetooth Calling Smartwatch
WAVE BEAT CALL
Thank you for choosing the boAt Wave Beat Call as your fitness transformation
companion.
Allow this manual to guide you through the functioning of your smartwatch. Please read it thoroughy before using it for a smooth sail. You may refer to these instructions for later use as well.
PACKAGE CONTAINS
- boAt Wave Beat Call x
- US8 magnetic charging cable x1
- User Manual x1
- Waranty Card x1
CHARGING THE WATCH
The smartwatch must be charged before initial use. It takes 2 hours to be
fully charged.
Connect and charge the watch with the image below as a reference, using a
5V/2A adapter.
Note: Once your watch is at 10% battery, it will automatically switch to power saving mode which will disable all functions.
TURNING THE WATCH ON/OFF
- To turn the watch on/off, long-press the side button for 3-5 seconds.
- You can wake the screen by lifting your wrist.
CONNECTING TO THE APP
-
Download the boAt Crest app on your phone.
Available on both App Store (iOS 13.0 and above) and Google Play Store (Android 6.0 and above) OR Scan [QR CcODE] (Also available on the watch) -
Connect the device with the boAt Crest app
-
Select Wave Beat Call on the home screen of the app and click pair to connect.
-
To use all features of your Wave Beat Call seamlessly, tap on yes’ to the ‘connection’ and ‘grant access’ system prompt.
-
Turn your phone’s Bluetooth and GPS on.
-
Disable battery optimization
Note: To ensure connectivity throughout your journey, make sure the app
is allowed to run in the background of your phone at all times.
IPhones will not prompt any information unless you complete Bluetooth pairing
with WAVE Beat Call.
SYNCING YOUR SMARTWATCH TO THE APP
Data Synchronization
- Open the app on your phone
- Make sure your Wave Beat Call is connected to the app
- Synchronization will start automatically once you enter the app interfac
- Note: Synchronize data at least once a day to avoid data loss in the watch.
NAVIGATING THROUGH THE FUNCTIONS SHORT PRESS THE SIDE BUTTON FOR MAIN
MENU
Call
- To use the BT Calling feature, open the boAt Crest app and pair the watch.
- Once paired you will get the pop-up on the app home screen to connect with Phone’s Bluetooth.
- Click on “pair” to connect with phone’s Bluetooth. Alternatively. you can go to phone’s Bluetooth settings and pair “BEATCALLBT to start the calling feature on your watch.
- Note: Enable call alerts from the setting to get calls on the watch Up to 20 contacts can be saved in the phonebook Cail history will show the latest call details. Use a dialer to dial any number
- To optimize the battery performance, BT calling will be on standby mode if not in use, it will be active as soon as you get an incoming call or if you make an outgoing call
Activities
Click on the sports mode icon to choose from 10 different sports modes:
Walking, Treadmill, Running, Badminton, Football, Basketball, Tennis, Yoga,
Dancing, Indoor Cycling To pause or stop the exerc ise, press t he home
button, click finish to end the exercise,
Note: All records w/11 be aval/ab/e on the app If you keep It synchronized.
-
Activity Records
Tap to check Activity Records of t he day, -
Heart Rate MonltOf”
wear the watch on your wrist, then ctlck on the Icon to start measurements. You can also view the data on t he app.
Notes: Measurements are for reference only and not for medic.al purposes. -
Sp02 monitoring Wear t he watch on your wrist. thel’I ctlck on the Icon to start measurements. You can also view the data on t he app.
Notes: Measurements are for reference only and not for medical purpos11s
Sleep Monitor
- Tap on the icon to review the sleeps data o f the previous night. Once the asloep criteria is mot. your Wave Beat Call will start recording from 8 pm at night to 10 am In the morning the next day.
- Once you lie down and the watch detects no movement for 30 minutes,
- It will • start recording, and will $IOP recording If It detects exce•slve movement. You can check the data on t he app only after the awake criteria is Mel
- You can also track sleep scores. on the boat Crest app,
Notes
- For accurate sleep data recording, the asleep criteria has to be met which Includes limited movement, w,;st positions and angles, and more.
- The awake criteria will be met only after ;t records some noticeable movement
Guided Breathing Mode
Click on the breath training icon to regulate your breathing with the
Instructions given to relax.
Notifications
Tap on this icon to check notifications.
Stopwatch
Tap on the icon to start the stop wat ch.
Timer
Tap on this to turn on the timer.
Alarm
Tap on this to set an alarm on your watch
Flashlight
Tap on this to turn your dial into a flashlight.
Camera Control Mode
Tap on the remote camera icon on your watch Wave Beat
Call to clicka photo from your phone
Notes: Turn the camera on from your phone to use this feature.
Music Cotrol
Some apps with different protocols might not work. Find My Phone
Tap on this icon to find your phone. Once enabled, your
phone will start ringing and vibrating. Tap again to stop it Notes: Your
watch Wave Beat Call should be connected to your phone via Bluetooth and
within its range for this feature to work.
Settings
Watch Faces: Tap on this icon to change your watch face
- Screen Sleep
- Tap on this to set screen sleep duration.
- Vibration
- Tap on this to turn on vibration.
- Do Not Disturb
- Tap on this to disable all notifications except alarms.
System
-
Restart
Tap on this to restart your watch. -
Power off
Tap on this to switch your watch off. -
Factory Reset
Tap on this to reset watch data. -
Notes: All data will be erased if watch is reset
-
Download app
Scan the QR code to download the app -
About
Shows the device details
Volce assistant
You can access Ok google and Siri on your phone with this feature. Make sure
your dual connection is completed to use this feature. Phone has to be in
unlock mode in order for this feature to work
Swipe down for shortcut menu
You can access DND, Alarms, Clock, Find My Phone, Brightness, Settings
Swipe left or right to access all data
You can access daily activity and Spo2, heart rate monitor, sleep monitor,
notifications from here.
PRODUCT PARAMETERS
- Model: boAt Wave Beat Call
- Screen Type: 1.69″ HD Display
- Battery Capacity: 240 mAh
- Net weight: 46g
- Bluetooth version : Bluetooth 5.0 + BT3.0
- Working temperature: 0P 45° Celcius
- Charging time: about 2.5. hours
- Working time: up to 7 days in normal mode, up to 2 days on BT calling
- Maximum transmission power: 7.5dBm
- Frequency band: 2402 -2480 MHz
Maintenance
- Regularly clean your wrist and the strap of the smartwatch, especially after sweatin9 during exercise or being exposed to substances such as soap or detergent, which may get stuck on the other end of the product.
- Do not wash the strap with a household cleanser. Please use soap less detergent, rinse thoroughly and wipe with a piece of soft towel or napkin.
- For spots or stains that are not easy to remove, scrub the area with rubbing alcohol and then follow the above procedure.
FAQ
Search for the app to connect keeps failing
- Keep the boAt Crest app updated to the latest version
- Close all the programs on the watch+Stop and restart Bluetooth and GPS-Connect again
- Check and enable notification functions of your phone and keep the phone and watch in close contact.
Note: Make sure your phone 5ystem meets Android 7.0 and above and ios 13.0 and above.
My Wave Beat Call is receiving no alerts, texts, or phone calls
Make sure smart reminders on the app are on and synced to the Wave Beat Call.
Also make sure your notification center of the phone is displaying messages.
Only then will your smartwatch also display those notifications. Make sure app
is running in the background and battery optimization feature on the phone is
disabled.
My Bluetooth keeps getting disconnected
- Make sure there is not more than 7m distance between Bluetooth on the phone & the watch.
- There is no obstacle in between the watch and the phone.
- Make sure the app is running in the background
Which functions of the Wave Beat Call need Bluetooth to work?
Call & Text Notifications, Find My Phone, music control, camera control,
weather forecast, cloud and custom watch faces and need Bluetooth connectivity
to work
will it be okay to take a bath wearing the Wave Beat Call?
The IP68 water resistance will only work under the following conditions:
(1) Maximum depth of water 1.5m (2) Maximum time for exposure to water: 10
minutes
The watch isn’t suitable for hot baths, hot springs, saunas, snorkeling,
diving, water skiing and other wading or deep-water activities with high-speed
water flow.
SAFETY &PRODUCT INFORMATION
Battery
- Do not disassemble, bore or demage the battery.
- Do not disassemble the built in batteries of non-replaceable battery devices
- Do not use sharp objects to remove the battery.
Health Warning
- If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitor of the watch.
- The optical heart rate sensor will glow green. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician before wearing this device
- The device tracks your daily activities through sensors. This data is intended to tell you about your daily activities such as steps, sieep, distance, heart rate and calories, but may not be completely accurate
- The device accessories, heart rate sensor, oxygen level monitor, and other relevant data is designed for fritness and not for medical purposes. They are not applicabie to the diagnosis. monitoring, treatment or prevention of any diseases or symptoms. The heart rate and blood pressure data is for reference only. We’re not responsible for any deviation in data.
- Avoid wearing the watch too tightly. Make sure you keep your skin dry the area that comes in contact with the watch. If symptoms such as redness or swelling appear on your skin, immediately stop using the watch and consult the doctor
Things to keep in mind
- Sync data everyday days to avoid data loss.
- Water Resistance will not work for seawater, acidic and alkaline solutions, chemical reagents & other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.
- Sports modes support up to 6 hours of exercise at a time.
- Avoid wearing the watch too tight in daily use. Keep the parts of skin touching the watch dry.
- Keep your arm still while measuring data for accurate measurement.
Disclaimer: This product is an electronic monitoring product and is not intended as a medical reference. We reserve the right to modify or improve any of the functions described in this manual without any prior notice. At the same time, we hold the right to continuously update the product content.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT SUBSTITUTE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points, With this little personal effort you contribute to recycle valuable raw materials and treatment of toxic substances
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>