SiFLY eFoil Surfboards User Guide
- June 10, 2024
- SiFLY
Table of Contents
foil Surfboards
User Guide
Just received your board?
Here’s what you should have:
- Board
- Handles
- Latches
- Mast
- Fuselage
- Front Wing
- Stabilizer
- Propeller Guard
- Propeller
- Stiffly Power cell LR
- RC + Charger
- Smart Charger
Heading to the beach?
Here’s what you should do:
Download the Stiffly App and Create an Account
You can find the application Silly foils on both the App Store and the Google
Play Store.
Download the app and register to be able to monitor and control your Stiffly
boards, batteries, remotes and chargers.
Charge the Safely Power cell LR
To safely charge your Stiffly Power cell LR, you must always use the supplied
Smart Charger. Make sure all connection ports are dry. To attach the power
cables, push the black plug connector onto the black socket connector of the
battery until you hear a click. Then, align the positive (red) connector
sideways to the battery with its top pointing outwards and push it onto the
red socket connector until you hear a click. Place the magnet key on the
circular magnetic keypad on the top of the battery to start the charging
process. Once the battery starts charging, a small LED light will start
flashing. The LED will flash several times in green — each flash represents
20% of the charge. If charging is ongoing, there will be a short blue flash
in between the capacity readings. Once the charging process is completed, the
LED will show solid green. To monitor the battery percentage through the
mobile app disconnect the charger.
Charge the SiFly Remote Controller
The Silly Remote Controller is charged wirelessly. Connect the supplied
Wireless Charging Pad with the provided cable and adapter and place the RC on
the pad to start charging.
Ready to start eFoiling?
Here’s how to set everything up:
How to assemble your eFoil
Place the board upside down, making sure there is no degree on its bottom and
in the cable tube.
Apply the provided Tafel in the stainless steel inserts in the board to
prevent oxidation. Lubricate the O-ring at the mast plate with the provided
electrolyte gel. Carefully run the connectors through the cable hole and
gently push the hydrofoil in its place with a slight twisting motion.
Tighten it with the provided screws. Apply some Tafel to the 5 threaded
inserts holding the wings in place. To adjust the riding balance of the foil,
use the provided plastic shims. Tighten the wings with the corresponding
screws.
For your safety, make sure you watch our step by step video guide to correctly
assemble your eFoil.
https://siflyglobal.qrd.by/how-to-assemble-your-efoil
How to pair your remote controller
Turn on the remote by holding down the “-” and “F” buttons for 4 seconds.
Access the menu by holding down first the “+” button for 3 seconds, then the
“F” button for another 3 seconds. Use the “-” and “+” buttons to navigate up
and down the list, “X” to go back and “F” to confirm. Navigate to the “Pair”
tab in the menu and press “F” to confirm. Once the remote is in pairing mode,
open the Stiffly foils app and select the board that you would like to pair it
with. Click on the “Pair Remote” tab. Click on the remote controller found on
the list of devices in range. Now your remote is paired to the desired board.
Press “X” and “F” consecutively to unlock the remote. Hold down the trigger
to start moving and increase and decrease gears by using the “+” and “-”
buttons.
Enjoy your time on the water!
https://siflyglobal.qrd.by/how-to-pair-your-remote-controller
User safety
Here’s how to practice foiling safely:
How to eFoil
For your safety and that of others, please ensure that you obtain proper
training or practice before operating a SiFly eFoil. Failure to do so may may
cause damage to the user, their property or third parties. This 5 step how-to
guide will get you foiling from zero experience in the safest and fastest way
possible!
https://siflyglobal.qrd.by/how-to-efoil
Safety and Disclaimer
Congratulations on the purchase of your new Stiffly eFoil! The eFoil is an
innovative battery-powered electric surfboard that allows users to fly above
water virtually silently and emissions-free.
Like all watercraft, the Stiffly eFoil requires riders to take specific
precautions while using it. For this reason, we urge you to read through the
User Manual carefully — in particular, the safety information and the
instructions for assembly, set up, and use before operating.
It is important to note that Stiffly shall not bear any responsibility and
liability against damage to the user, their property, or third parties. By
handling a SiFly product, you agree you are doing so at your own risk.
So get ready to fly into a fascinating new world! We wish you many hours of
fun with Safely!
All information within this guide is subject to change at the discretion of
Stiffly. For the latest product details and our complete User Manual visit our
website at www.sifly.global/support
Warning
All SiFly products conform with the current safety standards and are
especially designed to operate safely. Nevertheless, always wear an impact
vest and helmet and ride far always from swimmers and other watercraft. Never
ride further away from shore than you can swim back and always let somebody
know of your plans.
Consider the safety of the environment. Do not ride in shallow waters with
depth of less than 1.0 m, crowded areas, rocky banks and in extreme weather
conditions.
Children under 12 years of age should ride under adult supervision.
Do not use incompatible components or alter this product in any way different
from the instructions and documents provided by SiFly.
It may be necessary to obtain a license to use a SiFly eFoil in certain areas.
Use of the SiFly eFoil by pregnant women is not permitted.
Never use the SiFly eFoil while under the influence of alcohol, medication or
drugs. Persons using the SiFly eFoil must be able to react quickly. Alcohol,
medication and drugs can considerably inhibit the ability of users to react
quickly.
Use the SiFly eFoil only if you aré completely healthy.
Maintenance and Storage
Never leave your SiFly eFoil, Remote controller, SiFly Power Cell LR
rechargeable battery and SiFly Battery Charger under direct sunlight or heat
for prolonged periods. Never leave your eFoil and Power Cell in the car on a
hot sunny day!
After each session rinse the board and foil thoroughly with fresh water. Pay
attention to the motor and rubber seals. Crystallized salt can damage both of
them. In case of water ingression in the battery compartment, clean it with
fresh water and let it dry out before use.
If you store your eFoil assembled for longer times, make sure to disassemble
it every 3-4 week and apply Tafel to the screws and inserts, to avoid
oxidation processes. Additionally, apply some dielectric gel to the
communication and power connectors every once in a while to prevent
electrolysis. Use the same gel to lubricate the O-ring on the top of the mast
plate to ensure a good seal.
Complete User Guide
For more information, make sure to download the complete user guide by
following the QR code bellow.
Copyright 2022 | All rights reserved
SiFly Al Ltd.
Documents / Resources
|
SiFLY eFoil
Surfboards
[pdf] User Guide
eFoil Surfboards, eFoil, Surfboards
---|---