BENKS MP01 MagSafe Power Bank User Manual

MP01 MagSafe Power Bank

Product Information

The MagSafe Power Bank is a 3-in-1 wireless charging power bank that comes with a 10000mAh polymer lithium battery. It can charge iPhones, AirPods, and Apple Watches. The product features both USB input/output that supports PD QC3.0 fast charging with 20W charging speed. It also has a wireless charging output power of 5W/7.5W/10W/15W. The device is made of ABS+PC/Aluminum Alloy material and has a size of 14070.617.5mm.

Specifications

• Battery Capacity: 10000mAh / 3.7V 37Wh
• Lightning Input: 5V 2.0A / 9V 2A
• Type C Input & Output: 5V 2.5A / 9V 2A / 12V 1.67A
• Wireless Charging Output Power: 5W / 7.5W / 10W / 15W
• Size: 14070.617.5mm
• Material: ABS+PC / Aluminum Alloy

Note: For fast charging mode, an 18W or above power adapter is required as the power source.

Attention

1. Do not squeeze or collide vigorously.
2. Please do not disassemble or put into the fire or water in the powered state to avoid short circuit and leakage.
3. Please do not use in severe high temperature, high humidity, or corrosive environment to avoid damage to the circuit and leakage.
4. Please do not place magnetic cards with magnetic stripes or chips (ID cards, bank cards, etc.) on the wireless charging board to avoid magnetic card failure.
5. Please do not place metal (coins and other metal objects) on the wireless charging pad while charging, to avoid heat damage.

Product Usage

Before using the MagSafe Power Bank, please make sure to read the instruction manual carefully. To turn on the device, short press the Power button. To turn off the device, press and hold the Power button for three seconds. Here are some additional usage instructions:

Charging iPhone, AirPods, and Apple Watch

1. Make sure the MagSafe Power Bank is turned on.
2. Place your iPhone, AirPods, or Apple Watch on the wireless charging pad.
3. The device will start charging automatically. You can check the battery level from the LED battery indicator.

Charging the MagSafe Power Bank

1. Connect the Lightning or Type C input to a power source using a compatible cable and adapter.
2. The device will start charging automatically. You can check the battery level from the LED battery indicator.

Using USB Input / Output

1. Connect your device to the MagSafe Power Bank using a USBcable.
2. The device will start charging automatically. You can check the battery level from the LED battery indicator.
3. If you want to charge the MagSafe Power Bank using a USB power source, connect the Type C port to the power source using compatible cable and adapter.

Note: Please refer to the user manual for more information on how to use the MagSafe Power Bank.

Thank you for purchasing Specifications and using this Product!

Please read this operation instruction carefully before using this product

Attention

1. Do not squeeze or collide vigorously.
2. Please do not disassemble or put into the fire or water in the powered state to avoid short circuit and leakage.
3. Please do not use in severe high temperature, high humidity or corrosive environment to avoid damage to the circuit and leakage.
4. Please do not place magnetic cards with magnetic stripes or chips (ID cards, bank cards, etc.) on the wireless charging board to avoid magnetic card failure.
5. Please do not place metal (coins and other metal objects) on the wireless charging pad while charging, to avoid heat damage.

Product Specifications

for Fast charging mode, 18W or above power adapter is required as its power source.

Product Description

1. 10000mAh polymer lithium battery.
2. 3 in 1 magnetic wireless charging power bank, can charge iPhone, AirPods and Apple watch.
3. Both USB input/output are 20W fast charging, support PD QC3.0 fast charging.
4. 15W wireless charging output.
5. Bracket design, 60°angle conform ergonomic design,  can watch movie while charging.

Product Detail Part

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>