RYOBI RBIRT08 Infrared Thermometer Instructions

RYOBI RBIRT08 Infrared Thermometer

Product Information

The RBIRT08 Infrared Thermometer is designed with safety, performance, and dependability in mind. It is intended for indoor use only and is suitable for detecting hot/cold spots in door and window seals, checking the temperature of air vents, and checking the exterior/interior surfaces of household items and appliances. It can also be used for automotive applications.

This product should only be used by adults who have read and understood the instructions and warnings in the manual. The laser beam should not be directed towards other people or animals, as it can cause severe eye injury. The product should not be used on reflective surfaces, in explosive areas, or in extreme environments. All repairs should be performed by an authorized service center.

Product Usage Instructions

1. Read and understand the manual carefully before using the product.
2. Insert a 9 volt battery into the battery cover.
3. Aim the infrared thermometer at the object you want to measure.
4. Press and hold the trigger to activate the laser.
5. Read the temperature on the LCD screen.
6. Release the trigger to turn off the laser and conserve battery life.
7. Do not use solvents when cleaning plastic parts. Use clean cloths to remove dirt and debris.
8. Avoid heavy impact or dropping of the laser to maintain accuracy.

Remember, this product should only be used for its intended purpose and by responsible adults. Do not operate the product around children or allow children to operate the laser. If you have any questions about your product or its usage, please consult the manual or contact an authorized service center.

Important It is essential that you read the instructions in this manual before assembling, maintaining and operating the product

Safety, performance, and dependability have been given top priority in the design of your infrared thermometer.

INTENDED USE

The infrared thermometer is intended to be used only by adults who have read and understood the instructions and warnings in this manual, and can be considered responsible for their actions.
The product is intended for the following applications:

• Detecting hot/cold spots in door and window seals to help pinpoint draft areas or leakage of warm or cool air
• Checking the temperature of air vents
• Checking the exterior/interior surfaces of household items and appliances
• Automotive applications

The product is intended for indoor use only.
Do not use the product for any other purpose. Use of the product for operations different from intended could result in a hazardous situation.

INFRARED THERMOMETER SAFETY WARNINGS

• Laser radiation. Do not stare into  beam. Class 2 laser product.
• Risk of severe eye injury if the laser beam is directed at persons or animals. Avoid direct eye exposure.
• Do not direct the laser beam towards other people.
• Do not operate the product around children or allow children to operate the laser.
• Avoid using the product on reflective surfaces. The laser beam may be reflected at the operator or other persons.
• Store the product indoors and avoid substantial knocks, continuous vibration or extreme temperatures.
• Always keep the product away from dust, liquids and high humidity. They may damage internal components or affect accuracy.
• Do not remove or deface warning labels on the product.
• Do not disassemble the product.
• Avoid heavy impact to or dropping of the laser. The accuracy of the laser should be checked before use if it has been dropped or subjected to other mechanical stresses.
• Do not operate the product in explosive areas or in extreme environments.
• If the product is used in a manner not specified by the manufacturer, the protection provided by the product may be impaired.

KNOW YOUR PRODUCT

1. Laser beam
2. Measuring beam
3. Trigger
4. Battery cover
5. LCD screen
6. 9 volt battery
7. Hold mode
8. Current temperature
9. Battery indicator
10. Laser indicator
11. °C / °F indicator
12. Maximum temperature

MAINTENANCE

• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
• For greater safety and reliability, all repairs should be performed by an authorized service centre.

SYMBOLS ON THE PRODUCT

• CE conformity
• EurAsian Conformity Mark
• Ukrainian mark of conformity
• Please read the instructions carefully  before starting the  machine.
• Class 2 laser beam. Do not stare into the  laser beam.
• Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
• Note
• Do not stare into the laser beam.

PRODUCT SPECIFICATIONS

Infrared thermometer

• Model RBIRT08
• Power type Alkaline or lithium battery
• Temperature range -50°C ~ 550°C (-58°F ~ 999.9°F)
• Laser class/Laser power output 2, <1mW
• Laser wavelength 650 nm
• Laser dots 8
• Beam divergence 1.5 mrad
• Battery run time 20 hrs
• Product size 8.8 cm(L) x 4.3 cm(W) x 14.5 cm(H)
• Supply voltage 9V
• Operating temperature range 0°C ~ 50°C
• Storage temperature range -10°C ~ 60°C
• Relative humidity (no condensation) 20% ~ 80%RH
• Accuracy Point ± 2°C or 3% of the reading, whichever is greater ( > 0°C )
• Resolution (1 decimal) 0.1 °C
• Distance to spot ratio (D:S) 8 : 1
• Emission coefficient Preset to 0.95
• Temperature update 0.5 secs.
• Operating altitude <200m
• Pollution degree 2

NOTE: Between 280 MHz and 423 MHz at 3 V/m, the instrument may not meet its stated accuracy

RYOBI® WARRANTY APPLICATION CONDITIONS

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
2. There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly-acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
3. The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:
4. any damage to the product that is the result of improper or lack of maintenance
5. any product that has been altered or modified
6. any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
7. any damage caused by non-observance of the instruction manual
8. any product not displaying the CE approval mark on the rating plate
9. any product that has been attempted to be repaired by a non-authorized warranty service center or without prior authorization by Techtronic Industries
10. any product connected to improper power supply (amps, voltage, frequency)
11. any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
12. normal wear and tear spare parts
13. inappropriate use, overloading of the tool
14. use of non-approved accessories or parts
15. Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
16. Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
17. For servicing, the product must be sent or presented to a RYOBI authorized service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organization. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.
18. A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected
19. This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey and Russia. Outside these areas, please contact your authorised RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE
Any request or issue with the product can be addressed to your local authorised service centres (visit www.ryobitools.eu) or directly to: Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany. Please state the serial number and product type printed on the label.
RYOBI is a trade mark of Ryobi Limited, and is used under license.
Techtronic Industries GmbH
Max-Eyth-Straße 10,
71364 Winnenden, Germany

References

• Ryobi Tools
• Ryobi Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>