PROZRTED Hot Water Recirculating System Pump Control Instruction Manual
- June 9, 2024
- PROZRTED
Table of Contents
**PROZRTED Hot Water Recirculating System Pump Control
**
Product Description
INSTALLATION STEP
- Take off the plastic battery sticker on the left side of the pump control.
- To pair with the pump: a. Unplug the pump and plug the pump back. b. After that, short press any button in the control in 5 seconds. The controller and pump will be connected with each other automatically.
- The temperature setting range is from 34 degree C to 42 degree C. Press the “UP” button or “DOWN” button to increase or decrease the setting temperature.
- Press the “UP” button or “DOWN” button one time to adjust the setting temperature for one degree C. And you also can hear “short Beep” from the pump when you press the “UP” button or “DOWN” button. You also can see the blue light from the control button.
- The max setting temperature is 42 degree C and the lowest setting temperature is 34 degree. The fixed temperature range is 5 degree C. For example, if the setting temperature is 42 degree C, when the water in pipe is over 42 degree C, the pump will stop to work and then the pipe water temperature is lower then 42-5=37 degree C, the pump will start to work.
- When the setting temperature is 42 degree C, if you press “UP” button, you will hear “longer beep” from the pump. When the setting temperature is 34 degree C, if you press “DOWN” button, you will hear “longer beep” from the pump.
- Manual mode: on/off switch. Press one time, the pump will work for one hour.
Read User Manual Online (PDF format)
Loading......