Hisense MWH409S WiFi Module User Manual
- June 9, 2024
- Hisense
Table of Contents
The user manual of TV’s WIFI module
The product description
The user can achieve TV connection WIFI net, through this module and the
voltage supplied by the system to the module needs to be transmitted by a
voltage regulator or circuit
This equipment may be operated in all European countries.
The module installation method is as follows: pass the large round hole of the
module through the limit column of the bracket of the TV, and fix the module
by the snap-fit on the bracket. Connect the external IPEX antenna to the
antenna pedestal of the module
Basic parameters
Feature Description| Feature Description|
---|---|---
Model| MWH409S|
Product Name| WiFi Module|
FCC ID| SARMWH409S|
IC| 27123-MWH409S|
Interface| USB2.0|
Supply Voltage| 3.3V± 0.33V|
Dimension| 28（mm）16（mm）3.05(mm)
Operating Temperature| -10° C to 70° C|
Storage Temperature| -40° C to 85° C|
RF output power
| Band| Limited power
---|---|---
WlAN| 2412MHZ-2462MHZ| <20
The display method of Model approved code
In the factory，the model approve code is pasted on the back shell in a label.3
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures：
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Labelling Instruction for Host Product Integrator
Please notice that if the FCC identification number is not visible when the
module is installed inside another device, then the outside of the device into
which the module is installed must also display a label referring to the
enclosed module. This exterior label can use wording such as the following:
“Contains FCC ID: SARMWH409S” any similar wording that expresses the same
meaning may be used.
Installation Notice to Host Product Manufacturer
The OEM integrator is responsible for ensuring that the end-user has no manual
instruction to remove or install module. The module is limited to installation
in mobile application, a separate approval is required for all other operating
configurations, including portable configurations with respect to §2.1093 and
difference antenna configurations.
Antenna Change Notice to Host manufacturer
If you desire to increase antenna gain and either change antenna type or use
same antenna type certified, a Class II permissive change application is
required to be filed by us, or you (host manufacturer) can take responsibility
through the change in FCC ID (new application) procedure followed by a Class
II permissive change application.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of FCC RF Rules.
This equipment should be installed and operated with minimum distance of 20cm
in between the radiator and your body. This transmitter must not be co-located
or operated in conjunction with any other antenna or transmitter
CAUTION:
To comply with the limits of the Class B digital device pursuant to Part 15 of
the FCC Rules, this device is compliant with Class B limits. All peripherals
must be shielded and grounded. Operation with non-certified peripherals or
non-shielded cables may results in interference to radio or reception
MODIFICATION
To assure continued compliance, Any changes or modifications not expressly
approved by the grantee of this devicecould void the users authority to
operate the device.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm(8 in )between the radiator and your body NOTE To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product Contains Transmitter module FCC ID: *** To satisfy IESD exterior labeling requirements, the following text must be placed on the exterior of the end product ” Contains Transmitter module IC:
This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
| BG| CZ| DK| DE| EE| IE| EL| ES| FR| HR
---|---|---|---|---|---|---|---|---|---|---
CY| LV| LT| LU| HU| MT| NL| AT| PL| PT
SI| SK| Fl| SE| UK| NO| IS| LI| CH| TR
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1 )This device
may not cause interference.(2)This device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with IC RSS‐102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body.
Please notice that if the IC identification number is not visible when the
module is installed inside another device, then the outside of the device into
which the module is installed must also display a label referring to the
enclosed module. This exterior label can use wording such as the following:
“Contains IC: 27123-MWH409S” any similar wording that expresses the same
meaning may be used.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
“Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.”
IC：27123-MWH409S
Manufacturer: Qingdao Hisense Communication Co., Ltd.
Address: 218 Qianwangang Road, Qingdao Economic & Technological Development
Zone, Qingdao, China
Importers:
Hisense France SAS
Address: 9 Rue des 3 Soeurs, 93420 Villepinte, France
Hisense Iberia, S.L.U
Address: Ronda Auguste y Louis Lumiere. 23 Nave 12. Edificio Lumiere – Parque
Tecnológico 46980
Paterna (Valencia) – Spain
Hisense Italia S.r.l
Address: Via Montefeltro, 6/A, 20156 MILANO
Hisense South Africa
Address: The Estuaries, Building 17 Oxbow Crescent, Century City, Cape Town,
SouthAfrica
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>