Leetop Technology GE Kit Orin User Manual
- June 9, 2024
- Leetop Technology
Table of Contents
GE Kit Orin
GEKit Orin is an embedded artificial intelligence computer independently
designed and developed by Leetop based on Nvidia AGX Orin module, which can
give computing power up to 200/ 275 Tops to m any terminal devices.
GE Kit Orin can be applied t o autonomous machines such as robot s, unmanned
delivery vehicles, intelligent gates and intelligent sales containers. It is
an ideal carrier for deep learning by deploying AI com puting power at the
edge.
|
Data
---|---
Module
| Nvidia Jetson AGX Orin 32GB| Nvidia Jetson AGX Orin 64GB
AI| 200 TOPS|
275 TOPS
CPU
| 8 core Arm® Cortex®-A78AE v8.2 64 bit CPU 2MB L2 + 4MB L3|
12 core Arm® Cortex®-A78AE v8.2 64 bit CPU 3MB L2 + 6MB L3
GPU
| 56 Tensor Core, 1792 core GPU with NVIDIA Ampere framework|
64 Tensor Core, 2048 core GPU with NVIDIA Ampere framework
Video memory
| 32GB 256 bit
LPDDR5 204.8GB/s|
64 GB 256 bit
LPDDR5 204.8GB/s
Memory
| 64GB eMMC 5.1| 64GB eMMC 5.1
Video codig| 1x 4K60 (H.265)
3x 4K30 (H.265)
6x 1080p60 (H.265)
12x 1080p30 (H.265)|
2x 4K60 (H.265)
4x 4K30 (H.265)
8x 1080p60 (H.265)
16x 1080p30 (H.265)
video decoding
| 1x 8K30 (H.265)
2x 4K60 (H.265)
4x 4K30 (H.265)
9x 1080p60 (H.265)
18x 1080p30 (H.265)| 1x 8K30 (H.265)
3x 4K60 (H.265)
7x 4K30 (H.265)
11x 1080p60 (H.265)
22x 1080p30 (H.265)
Power| 15W | 40W|
15W | 60W
I/O:
| interface | Specifications |
|---|---|
| DC | Power supply |
| Video output | 1 x HDMI |
| USB | 2 x USB3.2 Type-A 1 x |
USB 2.0 Link TYPE C
Network| 1 x GigabitEthernet (10/100/1000)
1 x 10 GigabitEthernet(10/100/1000/10000)
User Expansion| 1 x TF card
CAN FD| 1 x CAN FD
Memory| 1 x M.2(Type 2280)
Function Key| 1 x Power KEY, 1 x Reset KEY,
1 x Recovery KEY（Button）
Power Supply:
Power Supply
| Spec
---|---
Input Voltage|
Wide input 9- 20V DC 10A
Power consumption
|
up to 90W
Mechanical
| Mechanical | Spec |
|---|---|
| Dimensions (W×D×H) | 107×106.4×70.5 (mm) |
| Weight | 3.65Kg |
Enviromental
| Environmental | Spec |
|---|---|
| Operating Temperature | -25℃- +70℃ |
| Storage Temperature | -20℃-60℃ |
| Storage Humidity | 10%-90% non-condensing |
Appearance
Front view rear view
left view up view
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.