Shenzhen Xinlianfeng Technology BC062 Wireless Wet Urine Alarm Smart Baby Diaper User Guide

Shenzhen Xinlianfeng Technology BC062 Wireless Wet Urine Alarm Smart Baby

Diaper

Product Information

The wireless wet urine alarm, model BC062, has a size of 21090mm for the main unit and 7090mm for the urine moisture sensing transmitter. The product has several features, including ring mode, vibration mode, child lock, time display, electric quantity display, mode key for sound and vibration, power switch, timing button, and indicator lights for power and timing.

Power Supply

The machine can be switched on and off by long-pressing the power switch button for 2 seconds.

Mode Selection

To select the mode, long-press the mode button for 2 seconds until the mode icon starts flickering. Press the button one time to switch the mode selection. Adjust to the required mode and wait for 2 seconds to automatically determine the current mode.

Timing Setting

• To set the timing, hold down the timing button for 2 seconds.
• The time icon on the screen starts flashing and pulsating. Press the button once to switch between different times. Wait for 2 seconds when the time is adjusted to the required time to automatically determine the selected time. Long-press for 2 seconds to turn off the timing function.

Electric Power and Charging

When the battery is low, the electric power icon flashes red, indicating a need for charging. When connected to the charger, the red light starts breathing to indicate charging. When fully charged, the green light stays steady on. In normal use, the green light stays steady on when the battery is full.

Mode

• The modes available are vibration, sound, and sound + vibration.
• When the mode is set to sound + vibration, the icon stays on, and the corresponding light on the screen turns off after 1 minute of
  standby. Press any key to wake up.

Warning Light

When wet urine is detected, the red light blinks, and the beep and vibration are selected according to the mode. The blue light blinks when the alarm is triggered regularly. There are two kinds of sounds, and the sound and vibration are selected according to the mode.

Product Usage Instructions

1. Long-press the power switch button for 2 seconds to switch on the machine.
2. Long-press the mode button for 2 seconds to select the mode. Press the button once to switch the mode selection. Adjust to the required mode and wait for 2 seconds to automatically determine the current mode.
3. Hold down the timing button for 2 seconds to set the timing. Press the button once to switch between different times. Wait for 2 seconds when the time is adjusted to the required time to automatically determine the selected time. Long-press for 2 seconds to turn off the timing function.
4. When the battery is low, connect the charger to charge. The red light starts breathing to indicate charging. When fully charged, the green light stays steady on. In normal use, the green light stays steady on when the battery is full.
5. The modes available are vibration, sound, and sound + vibration. When the mode is set to sound + vibration, press any key to wake up after 1 minute of standby.
6. The warning light blinks when wet urine is detected. The beep and vibration are selected according to the mode. The blue light blinks when the alarm is triggered regularly.
   Note: This product is FCC compliant and evaluated to meet general RF exposure requirements. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Introduction to products

1. Power supply: Long press for 2 seconds to switch the machine on and off.
2. Mode selection: Long press the mode button for 2 seconds, the mode icon on the screen flickers and jumps, press it once to switch mode selection, adjust to the required mode, and then stop blinking for 2 seconds to automatically determine the current mode.
3. Timing setting: Hold down the button for 2 seconds to start the timing, and the time icon on the screen flashes and pulsates. Press the button once to switch between different times. When the time is adjusted to the required time, it will blink for 2 seconds and stop blinking to automatically determine the selected time. After timing is enabled, long press for 2 seconds to turn off the timing function.
4. Electric power and charging: when the electric power is low, the electric power icon flashes red light, indicating the need for charging. When connected to the charger, the red light breathing indicates charging, and when fully charged, the green light is steady on. In normal use, the green light is steady on when the battery is full.
5. Mode: Vibration, Sound, Sound + Vibration: When the mode is set to this mode, the icon will be always on, and the corresponding light on the screen will automatically turn off after 1 minute of standby. Press any key to wake up.
6. Warning light: when wet urine is triggered, the red light blinks, the beep and vibration are selected according to the mode, and the blue light blinks when the alarm is triggered regularly. There are two kinds of sounds (the sound and vibration are selected according to the mode).
7. Wet the sender induction, when clip induction into the water, across the conduction short-circuit, send alarm signal to the host, the host sends an alarm, the host can be any cancel tips, cancel within 1 minute after prompt clip does not open the host alarm prompt again trigger alarm, clip opens, need alarm manual press any key to clear the alarm transmitter power lights: When the power level is low, the light flickers, the red light is displayed when charging, and the green light is steady on when fully charged. When the power level is sufficient, the light is off. (energy saving)

Product Specifications

parts list

FCC Caution

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation.
• Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>