BOSCH GSS 1400 A Professional Orbital Sander Instruction Manual

BOSCH GSS 1400 A Professional Orbital Sander

Product Information GSS 1400 A Professional Sander

The GSS 1400 A is a professional sander manufactured by Robert Bosch Power Tools GmbH. It is designed for sanding various materials such as wood, metal, and plastics. The device has a powerful motor with a power rating of 1400 watts, which ensures efficient sanding. The sander has a compact and ergonomic design that makes it easy to handle, even during extended periods of use. It comes with several features that enhance user safety and convenience, including a dust extraction system and a switch lock function.

Product Features

• Powerful 1400-watt motor
• Compact and lightweight design
• Dust extraction system
• Switch lock function
• Easy-to-change sanding plates
• Low vibration levels

Product Usage Instructions

1. Before using the sander, read all the safety instructions in the user manual carefully.
2. Ensure that the power source and voltage rating of the sander is compatible with your electric supply.
3. Attach the sanding plate to the sander using the quick-clamping system.
4. Connect the dust extraction hose to the sander and to a dust extraction system if available.
5. Switch on the sander and start sanding by moving it in a back-and-forth motion over the workpiece. Avoid pressing too hard on the sander, as it may damage the workpiece or the sanding plate.
6. To change the sanding plate, switch off the sander and release the quick-clamping system.
7. After use, switch off the sander and unplug it from the power source.
8. Clean the dust extraction system and sanding plates regularly to ensure optimal performance and longevity of the sander.

By following these instructions, you can use your GSS 1400 A sander safely and effectively for all your sanding needs.

Overview

Safety Instructions

General Power Tool Safety Warnings

WARNING
Read all safety warnings, instruc-tions, illustrations and specifications provided with this power tool. Failure to follow all in-structions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an exten-sion cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious per-sonal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal in-juries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or en-ergising power tools that have the switch on invites acci-dents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal in-jury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jew-ellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust ex-traction and collection facilities, ensure these are con-nected and properly used. Use of dust collection can re-duce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe in-jury within a fraction of a second.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was de-signed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or re-move the battery pack, if detachable, from the power tool before making any adjustments, changing ac-cessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Warnings for Sander

• Only use the power tool for dry sanding. Water entering a power tool will increase the risk of electric shock.
• Warning: Danger of fire! Avoid overheating the workpiece and the sander. Always empty the dust collector before taking a break from work. Sanding dust in the dust bag, microfilter, paper bag (or in the filter bag or vacuum cleaner filter) can spontaneously combust under certain conditions, for example, if flying sparks are created when sanding metals. This risk is increased if the sanding dust is mixed with paint or polyurethane residue or with other chemical substances and if the workpiece is hot as a result of prolonged work.
• Clean the air vents on your power tool regularly. The motor’s fan will draw dust inside the housing and excessive accumulation of powdered metal may cause elec-trical hazards.
• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more securely than by hand.
• Always wait until the power tool has come to a complete stop before placing it down.

Products sold in GB only:
Your product is fitted with a BS 1363/A approved electric plug with an internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorized customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a main socket elsewhere.

Product Description and Specifications

Read all the safety and general instructions.
Failure to observe the safety and general in-structions may result in electric shock, fire and/or serious injury.

Please observe the illustrations at the beginning of this operating manual.

Intended Use
The power tool is intended for dry sanding of wood, plastic, metal, filler and varnished surfaces.

Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.

1. On/off switch
2. Complete dust box (Microfilter system) (GSS 1400 A)
3. Rear clamping bracket
4. Sanding plate
5. Sanding sheet clamps (2x)
6. Sanding sheet a)
7. Front clamping bracket
8. Handle (insulated gripping surface) (Softgrip only on GSS 1400 A)
9. Extraction outlet (GSS 1400 A)
10. Filter element (Microfilter System) (GSS 1400 A)
11. Dust extraction hose a)
12. Punch a)

Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical data

Sanding sheet dimensions

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Assembly

Pull the plug out of the socket before carrying out any work on the power tool.

Changing the sanding sheet
Remove dirt and dust from the sanding plate (4), e.g. with a brush, before attaching a new sanding sheet. To ensure optimum dust extraction, make sure that the punched holes in the sanding sheet are aligned with the drilled holes in the sanding plate.

Sanding sheets without hook-and-loop backing (see figures A–C)

1. Unlock both sanding-sheet clamps (5) and swivel them downwards.
2. Insert the sanding sheet (6) under the rear clamping bracket (3). Ensure that the sanding sheet (6) is not too short and that it is correctly clamped. Swivel the sand-ing-sheet clamp (5) back into the starting position and lock it in place.
3. Position the sanding paper so that it fits tightly around the sanding plate (4). Clamp the front part of the sand-ing sheet under the front clamping bracket (7). Ensure that the sanding sheet (6) is not too short and that it is correctly clamped. Swivel the sanding-sheet clamp (5) back into the starting position and lock it in place.

Unperforated sanding sheets, e.g. from rolls or bulk stock sold by the meter, can be perforated using the punch (12) for the purpose of dust extraction. To do this, fit the sanding sheet on the power tool and push the tool down onto the punch (see figure F). To remove the sanding sheet (6), unlock both sanding-sheet clamps (5) and pull the sanding sheet out of its bracket.

Sanding sheets with hook-and-loop backing
If the sanding plate (4) is fitted with a hook-and-loop fasten-ing, sanding sheets with a hook-and-loop backing can be secured quickly and easily. Tap the hook-and-loop fastening of the sanding plate (4) before fitting the sanding sheet (6) to facilitate maximum adhesion. Position the sanding sheet (6) so that it is flush with one a side of the sanding plate (4), then place the sanding sheet on the sanding plate and press it on firmly. To remove the sanding sheet (6), take hold of it by an edge and pull it away from the sanding plate (4).

Selecting a sanding sheet
Different sanding sheets are available, depending on the material you are working with and the required surface removal rate:

Grit

• Red: Wood 40–240

For processing all wood and wood-based materials

• For pre-sanding, e.g. of rough and un-even beams and boards Coarse 40, 60
• For surface sanding and leveling of slight irregularities Medium 80, 120
• For finish-sanding and fine sanding of hardwoods Fine 180, 240
• White: Paint 40–240

For processing paint and lacquer layers or primers such as fillers and body fillers

• For sanding down the paint Coarse 40, 60
• For sanding undercoats Medium 80, 120
• For final sanding of primers prior to painting Fine 180, 240

Dust/Chip Extraction
The dust from materials such as lead paint, some types of wood, minerals, and metal can be harmful to human health. Touching or breathing in this dust can trigger allergic reac-tions and/or cause respiratory illnesses in the user or in people in the near vicinity. Certain dust, such as oak or beech dust, are classified as carcinogenic, especially in conjunction with wood treatment additives (chromate, wood preservative). Materials containing asbestos may only be machined by specialists.

• Use a dust extraction system that is suitable for the materials wherever possible.
• Provide good ventilation at the workplace.
• It is advisable to wear a P2 filter class breathing mask.

The regulations on the material being machined that apply in the country of use must be observed.

• Avoid dust accumulation at the workplace. Dust can easily ignite.

Self-generated dust extraction with dust box (see figures D1–D4) (GSS 1400 A)
Slide the dust box (2) onto the extraction outlet (9).

You can easily check the filling level of the dust box (2) through the transparent container. To empty the dust box (2), rotate slightly and pull it back. Unscrew the filter element (10) from the dust box (2). Empty the dust box. Gently tap the filter element (10) against a solid surface to loosen the dust. Use a soft brush to clean the flaps of the fil-ter element (10).

Note:
In order to ensure optimum dust extraction, empty the dust box (2) in good time and clean the filter element (10) regularly.

When working on vertical surfaces, hold the power tool with the dust box (2) facing downwards.

External dust extraction (see figure E) (GSS 1400 A)

• Attach the dust extraction hose (11) (accessory) to the extraction outlet (9). Connect the dust extraction hose (11) to a dust extractor (accessory).
• The dust extractor must be suitable for the material being worked.
• When extracting dry dust that is especially detrimental to health or carcinogenic, use a special dust extractor.
• When working on vertical surfaces, hold the power tool with the dust extraction hose facing downwards.

Operation

Starting Operation

• Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the power tool. Power tools marked with 230 V can also be operated with 220 V.
• Products that are only sold in AUS and NZ: Use a residual current device (RCD) with a nominal residual current of 30 mA or less.

Switching On/Off

• Make sure that you are able to press the On/Off switch without releasing the handle.

To switch on the power tool, tilt the on/off switch (1) toward the right to the “I” position. To switch off the power tool, tilt the on/off switch (1) toward the left to the “O” position.

Practical advice

• Always wait until the power tool has come to a complete stop before placing it down.

The material removal rate when sanding is primarily determined by the choice of the sanding sheet. Only immaculate sanding sheets achieve good sanding performance and make the power tool last longer. Be sure to apply consistent contact pressure in order to increase the lifetime of the sanding sheets. Excessively increasing the contact pressure will not lead to increased sanding performance, rather it will cause more severe wear of the power tool and of the sanding sheet.

Do not use a sanding sheet for other materials after it has been used to work on metal.
Use only original Bosch-sanding accessories.

Maintenance and Service

Maintenance and Cleaning

• Pull the plug out of the socket before carrying out any work on the power tool.
• To ensure safe and efficient operation, always keep the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bosch or by an after-sales service center that is authorized to repair Bosch power tools.

After-Sales Service and Application Service
Our after-sales service responds to your questions concerning the maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.

In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6 46200 Petaling Jaya Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my.

You can find further service addresses at:
www.bosch-pt.com/serviceaddresses.

Disposal

The power tool, accessories, and packaging should be recycled in an environmentally friendly manner.

Do not dispose of power tools along with the household waste.

Accessories

References

• Invented for life | Bosch Global
• Bosch Power Tools | Bosch Power Tools
• Location selection | Bosch Power Tools
• Bosch Power Tools | Bosch Power Tools
• Bosch Power Tools | Bosch Power Tools
• Dụng cụ điện cầm tay Bosch | Dụng cụ điện cầm tay Bosch
• Service worldwide
• บ๊อช ประเทศไทย | บ๊อช ประเทศไทย
• Contato | Bosch no Brasil

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>