EMCO STORM DOOR Measure Your Doorway User Manual
- June 9, 2024
- EMCO
Table of Contents
EMCO STORM DOOR Measure Your Doorway User Manual
Measuring
After selecting the style of door you want, measure your opening and visit The Home Depot® for availability and purchase.
Height
Measure height (H) from the sill to the underside of the exterior trim at the
top of the door.
H
Record your door height.
Width
Measure the width at the top (W1), center (W2), and bottom (W3) of the door
opening. Use the shortest measurement if they vary.
W1 W2 W3 _____
Record your door width. For double doors, order 2 doors and a double-door kit.
Door Size
Use the charts below to select the appropriate door size. Be sure to verify
the rough opening requirements for the door you select. Record the door size
you need.
Storm Door Size Charts
Verify Rough Opening Requirements
Select a storm door and then verify the minimum space requirements on your
existing door frame to make sure that your new storm door will
DIMENSION A
- Minimum of ¾” (1.91cm) for all storm doors; except the 75 Series and Forever®Storm Doors which require 1″ (2.54cm).
DIMENSION B
- A minimum of 1″ (2.54cm) required
DIMENSION C
- A minimum of 2 ½” (6.35cm) required
Andersen® and EMCO® Storm Doors
*DOOR SIZE ROUGH OPENING WIDTH RANGE ROUGH OPENING HEIGHT RANGE
30″| 29| 7 / 8 ” to 30| 3 / 8 “|
80″ to 80 7 / 8 “
**for all door sizes***
---|---|---|---|---
32″| 31| 7 / 8 ” to 32| 3 / 8 “
34″| 33| 7 / 8 ” to 34| 3 / 8 “
36″| 35| 7 / 8 ” to 36| 3 / 8 “
EMCO® Forever® Storm Doors
*DOOR SIZE ROUGH OPENING WIDTH RANGE ROUGH OPENING HEIGHT RANGE**
The actual door slab dimensions will be approximately 3/4″ less than the door size (e.g., on a 36″ door, the slab is 35 1/4″ wide).
Need a custom size?
DOOR SIZE ROUGH OPENING WIDTH RANGE ROUGH OPENING HEIGHT RANGE
Andersen| 27| 7 / 8 ” to 38| 3 / 8
“| 72″ to 84| 7 / 8 “
---|---|---|---|---|---
Andersen XL| 27| 7 / 8 ” to 42″| | 72″ to
96″|
EMCO| 27| 7 / 8 ” to 38| 3 / 8 “|
75″ to 84| 7 / 8 “
EMCO XL| 38| 7 / 8 ” to 42″| | 79″ to
91″|
To qualify for Andersen Custom XL sizing, only one of the following conditions must be met:
- The width of the opening must exceed 38 3/8″ or
- The height of the opening must exceed 84 7/8″
Andersen Custom XL must be specified as RH or LH. Ask an associate for details. For openings up to 1″ wider than those listed, order an optional Z-Bar Extender kit. Kits are also available for double-door installation. For more information visit stormdoors.com “Andersen” and all other marks are trademarks of Andersen Corporation and its subsidiary. Andersen Storm Door Division is a wholly owned subsidiary of Andersen Corporation that manufactures the storm doors in this brochure and supports the limited panties. “The Home Depot” and The Home Depot logos are trademarks of Homer TLC, Inc. ©2015 Andersen Corporation. All rights reserved. 3/2015
Download PDF:EMCO STORM DOOR Measure Your Doorway User Manual