PTZ Optics PT-WM-3-xx Large Wall Mount User Guide
- June 9, 2024
- PTZ Optics
Table of Contents
PT-WM-3-xx Large Wall Mount
User Guide
Large Wall Mount Setup Guide
Model Number:PT-WM-3-xx
hitps://ptzoptics.com/ptz-camera-wall-mounts/
PT-WM-3-xx Large Wall Mount
What’s Included:
1 – Large Wall Mount (1x) BK/WH
2 – #10-16×1 1/4” Phillips Pan Head Sheet Meta Screw with Flat Washer (4x)
3 – 10-12 x 1” Conical Plastic Anchor 1/4” Drill Size (4x)
4 – 1/4″-20x 3/8” Phillips Pan Head (4x)
4 – 1/4” Machine Screw Flat Washer (2x)
5 – #6-32x 1” Phillips Pan Head Machine Screw (4x)
Mounting Instructions:
Step 1
For masonry or drywall wall:
- Position Large wall mount (Fig 2) on wall and mark wall for anchor placement (Fig 2, 1)
- Pre-drill 1/4” holes, minimum 1” deep.
For double gang electrical box:
- Position over box with slots overlaying device mounting holes (Fig 2, 1) on box.
Step 2
For masonry or drywall wall:
- Place included anchors (Fig 1, 1) in wall and mount to anchors using included #10 sheet metal screws. (Fig 1, 2)
For double gang electrical box:
- Mount to box using #6 machine screws and washers. (Fig 1, 3)
Step 3
- Drill hole in wall through rear exit opening for cable access, or use base exit opening. (Fig 2, 2)
Step 4
- Mount Camera to mount (Fig 2, 3) with included 1/4-20 machine screw. (Fig 1, 4)
- Utilize (0,1,2) 1/4” machine screw flat washers as required. (Fig 1, 4) Note: 1/4” machine screw flat washers are to be used depending upon depth of thread insert in base of camera, in order to achieve a snug fit.
- Pass all cables through opening in mount (Fig 2, 2) and connect.
Mount Compatibility:
PT30X-4K-xx-G3
PT30X-LINK- 4K-xx
Other Cameras:
This mount has been designed for use with most large based cameras utilizing a
1/4-20” mounting hole as can be found on SONY, Panasonic, Cisco, Polycom and
Daddio cameras.
For more information on Optics mounts and other products please visit:
https://ptzoptics.com/ 
484-593-224] | ptzoptics.com/contact | ptzoptics.com