Miele 12039040 Cooker Hood Instruction Manual
- June 9, 2024
- Miele
Table of Contents
12039040 Cooker Hood
Operating and installation instructions Cooker hood
To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
en-GB
M.-Nr. 12 039 040
Contents
Warning and Safety instructions……………………………………………………………. 4 Caring for the
environment …………………………………………………………………… 13 Guide to the cooker hood
……………………………………………………………………… 14 Modes of operation
………………………………………………………………………………. 16 Before using for the first time
……………………………………………………………….. 17 Selecting extraction mode or recirculation
mode………………………………………… 17 Setting up Miele@home …………………………………………………………………………..
17
Connecting via the app ………………………………………………………………………. 18 Connecting via WPS
………………………………………………………………………….. 19 Sign out of WiFi (reset to factory settings)
…………………………………………….. 20 Setting up Con@ctivity …………………………………………………………………………….
21 Con@ctivity via the home WiFi network (Con@ctivity 3.0) ……………………….. 22
Con@ctivity via a direct WiFi connection (Con@ctivity 3.0) ……………………… 22
Reattempting the connection ………………………………………………………………. 23 Operation (Automatic
mode) …………………………………………………………………. 24 Cooking with Con@ctivity (Automatic mode)
……………………………………………… 24 Cooking process ……………………………………………………………………………………. 25
Leaving automatic mode temporarily ………………………………………………………… 26 Returning to
automatic mode………………………………………………………………. 26 Operation (Manual mode)
……………………………………………………………………… 27 Cooking without Con@ctivity (Manual mode)
…………………………………………….. 27 Switching on the fan……………………………………………………………………………….. 27
Selecting the power level ………………………………………………………………………… 27 Selecting the run-on
time ………………………………………………………………………… 27 Switching the fan off
………………………………………………………………………………. 28 Dimming/switching the hob lighting on/off
………………………………………………… 28 Power management ……………………………………………………………………………….. 28
Safety switch-off ……………………………………………………………………………………. 29 Energy saving tips
………………………………………………………………………………… 30 Changing settings
………………………………………………………………………………… 31 Altering the operating hours counter for
the grease filter(s) ………………………….. 31 Altering or deactivating the charcoal
filter operating hours counter ………………. 32 Deactivating power management
…………………………………………………………….. 32 Cleaning and care …………………………………………………………………………………
33 Housing ………………………………………………………………………………………………… 33
2
Contents
Operating hours counter …………………………………………………………………………. 34 Reading the filter
operating hours counter…………………………………………….. 34
Grease filters …………………………………………………………………………………………. 35 Replacing the grease
filters …………………………………………………………………. 36
Charcoal filters ………………………………………………………………………………………. 36 Resetting the charcoal
filter operating hours counter ……………………………… 37 Disposing of charcoal filters
………………………………………………………………… 37 Reactivatable charcoal filters
………………………………………………………………. 38
Service…………………………………………………………………………………………………. 39 Contact in the event of a
fault ………………………………………………………………….. 39 Position of the data plate
………………………………………………………………………… 39 Warranty
……………………………………………………………………………………………….. 39
Installation……………………………………………………………………………………………. 40 Before
installation…………………………………………………………………………………… 40 Installation recommendations
………………………………………………………………….. 40 Installation
materials……………………………………………………………………………….. 40
Installation materials for recirculation mode…………………………………………… 41 Appliance
dimensions …………………………………………………………………………….. 42 Installation distance between
cooking appliance and cooker hood (S)………….. 44 Connection for air extraction
……………………………………………………………………. 45
Non-return flap ………………………………………………………………………………….. 46 Condensation
……………………………………………………………………………………. 46
Silencer…………………………………………………………………………………………….. 47 Electrical connection
………………………………………………………………………………. 48 Technical
data………………………………………………………………………………………. 49 Optional accessories for
recirculation mode………………………………………………. 49 EU Conformity declaration
………………………………………………………………………. 50 UK Conformity declaration
………………………………………………………………………. 50
3
Warning and Safety instructions
This cooker hood complies with all relevant local and national safety
requirements. Inappropriate use can, however, lead to personal injury and
material damage. Read the operating and installation instructions carefully
before using the cooker hood. They contain important information on its
safety, installation, use and maintenance. This prevents both personal injury
and damage to the cooker hood. In accordance with standard IEC 60335-1, Miele
expressly and strongly advises that you read and follow the instructions in
the chapter on installing the appliance as well as the safety instructions and
warnings. Miele cannot be held liable for injury or damage caused by
noncompliance with these instructions. Keep these instructions in a safe place
and pass them on to any future owner. Correct application This cooker hood is
intended for use in domestic households and similar working and residential
environments. The cooker hood is not intended for outdoor use. It must only be
used as a domestic appliance to extract vapours and remove odours from
cooking. Any other usage is not supported by the manufacturer and could be
dangerous.
4
Warning and Safety instructions The cooker hood can only be used by people
with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
if they are supervised whilst using it, or have been shown how to use it in a
safe way and recognise and understand the consequences of incorrect operation.
Safety with children Children under 8 years of age must be kept away from the
cooker hood unless they are constantly supervised. Children aged 8 and older
may only use the cooker hood without supervision if they have been shown how
to use it and are able to do so in a safe manner. Children must be able to
understand and recognise the possible dangers caused by incorrect operation.
Children must not be allowed to clean or maintain the cooker hood
unsupervised. Please supervise children in the vicinity of the cooker hood and
do not let them play with it. The hob lighting is very intensive. Ensure, in
particular, that babies/small children do not look at the light. Danger of
suffocation. Packaging, e.g. plastic wrappings, must be kept out of the reach
of babies and children. Whilst playing, children could become entangled in
packaging or pull it over their head and suffocate.
5
Warning and Safety instructions
Technical safety Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and repairs must
only be carried out by a Miele authorised technician. A damaged appliance can
be dangerous. Check it for visible signs of damage. Do not use a damaged
appliance. The electrical safety of this appliance can only be guaranteed when
correctly earthed. It is essential that this standard safety requirement is
met. If in any doubt please have the electrical installation tested by a
qualified electrician. Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronised with the mains
power supply (e.g. island networks, back-up systems) is possible. A
prerequisite for operation is that the power supply system complies with the
specifications of EN 50160 or an equivalent standard. The function and
operation of the protective measures provided in the domestic electrical
installation and in this Miele product must also be maintained in isolated
operation or in operation that is not synchronised with the mains power
supply, or these measures must be replaced by equivalent measures in the
installation. As described, for example, in the current version of BS OHSAS
180012 ISO 45001. The connection data (voltage and frequency) on the data
plate of the cooker hood must match the mains electricity supply in order to
avoid the risk of damage to the cooker hood Compare this before connecting the
appliance to the mains. Consult a qualified electrician if in any doubt. Do
not connect the appliance to the mains electricity supply by a multi-socket
unit or an extension lead. These are a fire hazard and do not guarantee the
required safety of the appliance.
6
Warning and Safety instructions For safety reasons, this appliance may only be
used after it has
been built in. The cooker hood must not be used in a non-stationary location
(e.g. on a ship). Touching electrical components and tampering with electrical
and mechanical parts is highly dangerous to the user and can cause operational
faults. Only open the housing as described in the instructions given in the
installation sheet and in the Cleaning and care section of this booklet. Under
no circumstances should any other parts of the housing be opened. The
manufacturer’s warranty will be invalidated if the appliance is not repaired
by a Miele authorised technician. If the electrical connection cable is faulty
it must only be replaced by a Miele authorised technician to protect the user
from danger. The lamps are a built-in component of the lighting. Replacement
lamps may only be fitted by a Miele authorised technician or by the Miele
Customer Service Department. During installation, maintenance and repair work,
the appliance must be disconnected from the mains electricity supply.
7
Warning and Safety instructions
Using at the same time as another heating appliance that depends on the air
from the room
Danger of toxic fumes! Great care should be taken when using the cooker hood
in the same room or the same area of the house at the same time as another
heating appliance that depends on the air from the room. Such heating
appliances draw in air from the room and duct exhaust gases out through a
chimney or extraction ducting. They include gas, oil, wood and coal-fired
boilers and heaters, continuous flow or other water heaters, gas hobs and
ovens. The cooker hood draws in air from the kitchen and from neighbouring
rooms. This applies to the following modes of operation: Extraction mode
Recirculation mode with a recirculation box installed outside the room. If
there is insufficient air, negative pressure will occur. The heating appliance
may be starved of oxygen. This impairs combustion. Harmful gases could be
drawn from the chimney or extraction ducting back into the room. Risk of
death!
8
Warning and Safety instructions
In order to ensure safe operation and to prevent gases given off by the
heating appliance from being drawn back into the room when the cooker hood and
the heater are both operated simultaneously, an underpressure in the room of
0.04 mbar (4 Pa) is the maximum permissible. Sufficient ventilation can be
maintained by air inlets which cannot be blocked, e.g. in windows, doors and
outside wall vents. The cross-section of the inlet openings must enable
sufficient ventilation. A ventilation brick alone is not generally sufficient
to ensure safe ventilation. The overall ventilation condition of the dwelling
must be taken into account. If in any doubt, ask a competent building
regulations inspector or qualified gas fitter (if appropriate). If the cooker
hood is being operated in recirculation mode, whereby the air is redirected
into the room in which it is installed, the above restrictions do not apply.
9
Warning and Safety instructions Correct use Open flames are a fire hazard.
The use of an open flame under the cooker hood is not permitted. To avoid the
danger of fire, do not flambé or grill over an open flame. When switched on,
the cooker hood could draw flames into the filter. Fat deposits could ignite,
presenting a fire hazard. Always switch the cooker hood on when a cooking zone
is in use, otherwise condensation may collect in the hood, which could cause
corrosion. Overheated oil and fat can ignite, causing fire damage to the
cooker hood. When cooking with oil or fat, chip pans and deep fat fryers, etc,
do not leave the pans unattended. Similarly, never leave an open grill
unattended when grilling. Do not use the cooker hood without the filters in
place. This way you will avoid the risk of grease and dirt getting into the
appliance and hindering its smooth operation. The cooker hood can get very hot
during cooking due to heat rising from the hob. Do not touch the housing or
the grease filters until the cooker hood has cooled down.
10
Warning and Safety instructions
Proper installation To determine whether a cooker hood may be operated above
your cooking appliance, please refer to the information provided by the
appliance’s manufacturer. Safety regulations prohibit the fitting of a cooker
hood over solid fuel stoves. Safety regulations prohibit the fitting of a
cooker hood over a gas hob. An insufficient safety distance between the hob
and the cooker hood can result in damage to the cooker hood. The minimum
safety distances between the top of the hob and the bottom of the cooker hood
given in the “Installation” section of this manual must be observed, unless
the hob manufacturer states that a greater safety distance is required. If
more than one cooking appliance is fitted beneath the cooker hood, and they
have different minimum safety distances to the cooker hood, select the greater
distance. The information provided in “Installation” must be observed when
fixing the ventilation hood. Components can have sharp edges which may cause
injury. Wear gloves to protect your hands from being cut. Exhaust ducting must
be of non-inflammable material. Suitable material is available from Miele
specialist dealers or the Miele Spares Dept. The appliance must not be
connected to a chimney or flue which is in use. Neither should it be connected
to ducting which ventilates rooms with fireplaces. If exhaust air is to be
extracted into a chimney or ventilation duct no longer used for other
purposes, seek professional advice.
11
Warning and Safety instructions Cleaning and care There is a risk of fire if
the cooker hood is not cleaned as
described in these operating instructions. Do not use a steam cleaning
appliance to clean this appliance. The steam could reach electrical components
and cause a short circuit. Accessories and spare parts Only use genuine
original Miele accessories and spare parts with this appliance. Using
accessories or spare parts from other manufacturers will invalidate the
warranty and Miele cannot accept liability. Miele can only guarantee the
safety of the appliance when genuine original Miele replacement parts are
used. Faulty components must only be replaced by Miele spare parts. Miele will
guarantee to supply functional spare parts for a minimum of 10 years and up to
15 years following the discontinuation of your vapour extraction unit.
12
Caring for the environment
Disposing of the packaging material
The packaging material is used for handling and protects the appliance from
transport damage. The packaging material used is selected from materials which
are environmentally friendly for disposal and can generally be recycled.
Recycling the packaging material reduces the use of raw materials. Use
material-specific collection points for valuable materials and take advantage
of return options. Your Miele dealer will take the packaging material away.
Disposing of your old appliance
Electrical and electronic appliances contain many valuable materials. They
also contain certain materials, compounds and components which were essential
for their correct functioning and safety. These could be hazardous to human
health and to the environment if disposed of with household waste or if
handled incorrectly. Please do not, therefore, dispose of your old appliance
with household waste.
Instead, please make use of officially designated collection and disposal points to dispose of and recycle electrical and electronic appliances in your local community, with your dealer or with Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged to remove any old batteries which are not securely enclosed by the appliance and to remove any lamps without destroying them, where this is possible. These must be taken to a suitable collection point where they can be handed in free of charge. Please ensure that your old appliance poses no risk to children while being stored for disposal.
13
Guide to the cooker hood
14
Guide to the cooker hood
a Pull-out deflector plate b Grease filters c Control elements d Hob lighting
e Exhaust duct f Charcoal filter
Single-use or reactivatable charcoal filters Optional accessories for
recirculation mode g Control for switching the lighting on and off and for
dimming the lighting h Control for switching the fan on and off i Controls for
setting the fan power level j Control for the run-on function k Control for
the operating hours counter
15
Modes of operation
Depending on the model of the cooker hood, the following options are
available:
Extraction mode
Recirculation mode
Recirculation mode cooker hoods require a conversion kit and charcoal filters
(see “Technical Data”)
The air is drawn in and cleaned by the grease filters and directed outside.
The air is drawn in and cleaned first by the grease filters and then by the charcoal filters. The cleaned air is then recirculated back into the kitchen.
16
Before using for the first time
Selecting extraction mode or recirculation mode
The cooker hood is suitable for both extraction mode and recirculation mode.
The power of the fan is adapted to suit the selected operating mode. The
cooker hood is delivered set up for recirculation mode. It has to be reset for
extraction mode. To reset it for extraction mode, the operating hours counter
for the charcoal filter(s) has to be deactivated. Switch off the fan and the
lighting. Press the control and the operating
hours control at the same time. The charcoal filter symbol and one of the fan
power levels will flash. Press and hold the control until the
B indicator starts to flash. Confirm your choice with the
operating hours control . All the indicator lights will go out. Extraction
mode has now been set. If you do not confirm your selection within 4 minutes,
the cooker hood will automatically revert to the original setting.
Setting up Miele@home
Requirements: – A WiFi network – The Miele app – A Miele user account. The
user account can be created via the Miele app.
Your cooker hood is equipped with an integrated WiFi module. Connect the
cooker hood to your household WiFi network. You will then be able to operate
the cooker hood via the Miele app. If your Miele hob is connected to a home
WiFi network, you can control the cooker hood automatically via the
Con@ctivity function.
Before installing the cooker hood in its final location, ensure that the
signal of your WiFi network is strong enough.
You can connect to the household WiFi network via the Miele app or via WPS.
17
Before using for the first time
Miele@home availability The ability to use the Miele app depends on the
availability of the Miele@home service in your country. The Miele@home service
is not available in every country. For information about availability, please
visit www.miele.com.
Miele App The Miele App is available to download free of charge from the Apple
App Store® or from the Google Play StoreTM.
For the registration, you will need: 1. Your WiFi network password 2. Your
cooker hood password
The password for your cooker hood consists of the last 9 digits of the serial
number. This can be found on the appliance’s data plate. The data plate is
located on the casing of the cooker hood and is visible when the cover for the
charcoal filter slots is removed.
Connecting via the app The Miele app can be used to connect to your network.
Install the Miele app on your mobile
device.
Start signing the appliance on in the app. Follow the signing-on instructions.
If requested to activate WiFi on the cooker hood, proceed as follows:
18
Switch the cooker hood off. Press and hold the control.
Before using for the first time
Connecting via WPS Your WiFi router must support WPS (WiFi Protected Setup).
Switch the cooker hood off.
Press the lighting control at the same time .
Press and hold the control.
2 will light up constantly, 3 will flash on and off. The cooker hood will be
ready for connection in the next 2 minutes.
Follow the instructions in the app.
Press the lighting control at the same time .
2 will light up constantly, 3 will flash on and off. The WiFi connection must
be started on the cooker hood at the same time as on the WiFi router.
When successfully connected, 2 and 3 will light up constantly.
Press the control on the cooker hood after a few seconds.
Quit connection mode on the cooker hood by pressing the run-on control .
The cooker hood can now be operated via the app.
After a short while the 2 will light up constantly, and the 3 and the B will flash on and off. The cooker hood is ready for connection in the next two minutes.
19
Before using for the first time
Start the WiFi connection on your WiFi router.
Sign out of WiFi (reset to factory settings) To set up a new WiFi connection, the existing WiFi connection must be disconnected. Switch the cooker hood off.
When successfully connected the 2 and
3 will light up constantly.
Press and hold the control.
Quit connection mode on the cooker hood by pressing the Run-on control .
The cooker hood can now be operated via the app. If the connection fails, you
have probably not connected WPS on your router quickly enough. Repeat the
steps above. Tip: If your WiFi router does not support WPS, please connect via
the Miele app.
Touch the lighting control at the same time .
With an existing WiFi connection, 2 and 3 will light up constantly. The cooker
hood will be ready for disconnection in the next 2 minutes.
20
Before using for the first time
Touch the control. 2 will light up constantly, 3 will flash on and off.
After a few seconds, 2 and 3 will flash on and off. The connection has now
been disconnected.
Quit signing-off mode on the cooker hood by pressing the run-on control .
The WiFi connection has now been disconnected. A new connection can now be set
up.
Setting up Con@ctivity
Con@ctivity is the direct communication system between an electric Miele hob
and a Miele cooker hood. It enables the cooker hood to operate automatically
depending on the operational state of a Miele hob with onset controls. – When
the hob is switched on, the
cooker hood lighting comes on automatically and then after a short time the
fan also comes on. – The cooker hood selects the power level automatically
during cooking. The power level selected by the cooker hood depends on the
number of cooking zones being used and their power levels. – After switching
the hob off the fan and the hob lighting will switch off automatically after a
specified period of time. See “Operation” for detailed information about this
function.
21
Before using for the first time
Con@ctivity via the home WiFi network (Con@ctivity 3.0) Prerequisite:
– Home WiFi network – WiFi-enabled Miele hob Connect the cooker hood and hob
to your home WiFi network (see “Setting up Miele@home”). The Con@ctivity
function will be activated automatically.
Con@ctivity via a direct WiFi connection (Con@ctivity 3.0) Prerequisite:
– WiFi enabled Miele hob If you do not have a home network, you can establish
a direct connection between the hob and the cooker hood. See the Hob
instruction manual for details on how to connect them. Instructions on how to
connect the cooker hood are repeated in detail below. Switch the cooker hood
off.
Press and hold the control.
Press the control at the same time.
2 will light up constantly, 3 will flash on and off. The cooker hood will be ready for connection in the next 2 minutes.
22
Before using for the first time
Start WiFi connection on the hob. For further details, see the hob operating
instructions.
When successfully connected, 2 and 3 will light up constantly.
Quit connection mode on the cooker hood by pressing the run-on control .
Con@ctivity has now been activated. With a direct WiFi connection, it is not
possible to connect the hob and the cooker hood to a home network. Should this
be required at a later date, the WiFi connection between the hob and the
cooker hood must be disconnected (see “Sign out of WiFi”). Reattempting the
connection
If it is not possible to connect, 2 and 3 flash or the cooker hood cancels the
process. Disconnect the connection to the
cooker hood (see “Signing out of WiFi”) and to the hob. Attempt to make the
connection again.
23
Operation (Automatic mode)
When Con@ctivity is active, the cooker hood always operates in automatic mode
(see “Before using for the first time” “Setting up Con@ctivity”). If you
wish to manually operate the cooker hood, see “Operation (Manual mode)”
“Cooking without Con@ctivity”.
Cooking with Con@ctivity (Automatic mode)
Switch a cooking zone on at the desired power level.
The cooker hood lighting will come on. Pull out the deflector plate. The fan
will come on at power level 2. The cooker hood selects the fan power level
automatically during cooking. This is determined by the total output of the
hob, i.e. the number of cooking zones in operation and the power levels
selected. If you select a higher power level or
are using several cooking zones on the hob, the cooker hood will switch to a
higher fan power level. When you reduce the power level or the number of
cooking zones on the hob, the fan power level is also reduced.
Examples for power levels 1 to B
Reaction time
The cooker hood reacts with a slight delay because altering the power level on
the hob does not immediately result in a reduction or increase in cooking
vapours. Because the hob transmits the information to the cooker hood at
intervals, this can also cause delays. The reaction can vary from a few
seconds to a couple of minutes.
24
Operation (Automatic mode)
Cooking process
For example, you switch on a cooking zone at the highest power level to heat a
pan for frying. You reduce the power level after approx. 10 seconds to 4
minutes (60 seconds to 5 minutes for a for a HiLight hob).
The cooker hood recognises a cooking process. The cooker hood switches itself
on and when the hob power level has been reduced, the hood switches to fan
power level 3 and remains at that level for approx. 5 minutes. After that, the
cooker hood power level is determined automatically by the Con@ctivity
function. You can select another power level manually before then.
Switching off
Switch off all cooking zones. The cooker hood fan will reduce its power level
in stages over the next few minutes and will then switch itself off. This
helps to neutralise any lingering vapours and odours in the air. – From the
Booster setting, the fan
switches immediately to Level 3. – From Level 3, it will switch to Level 2
after approx. 1 minute. – From Level 2, it will switch to Level 1
after 2 minutes. – After 2 minutes at Level 1 the fan
switches itself off. – After another 30 seconds, the hob
lighting switches off. The cooking process is then finished. If the deflector
plate remains pulled out, the cooker hood will switch on automatically the
next time the hob is switched on: a few seconds after the hob is switched on,
the cooker hood fan will switch on, first at level 2 briefly before switching
immediately to level 1. Thereafter operation will be carried out
automatically.
25
Operation (Automatic mode)
Leaving automatic mode temporarily
To leave automatic mode temporarily during cooking: Manually select a
different fan power
level, or Manually switch the cooker hood off,
or Activate the run-on function on
the cooker hood. The fan will switch itself off after the selected run-on
time, and the lighting will remain on. The cooker hood functions are now
operated manually (see “Operation (Manual mode)”).
You can also operate the cooker hood manually for a complete cooking process.
Switch the cooker hood fan on
before the hob. If the cooker hood fan and the hob have been switched off for
at least 30 seconds after cooking, automatic mode will resume next time the
hob is switched on.
Returning to automatic mode The cooker hood will resume automatic mode: – If
the cooker hood has not been used
for approx. 5 minutes after selecting a fan power level manually, or – If the
manually selected fan power level corresponds to the automatic one again, or –
The cooker hood fan and the hob have been switched off for at least 30
seconds. Automatic mode will resume next time the hob is switched on.
26
Operation (Manual mode)
Cooking without Con@ctivity (Manual mode)
The cooker hood can be operated manually if: – The Con@ctivity function is not
activated. – You have temporarily deactivated the
Con@ctivity function (see “Operation (Manual operation)” “Leaving automatic
mode temporarily”).
Switching on the fan
Switch the fan on as soon as you start cooking. This is to ensure that vapours
are captured right from the start.
Pull out the deflector plate. To ensure optimum extraction and a low noise
level, pull the deflector plate all the way out.
The fan will come on at power level 2.
Selecting the power level
For light to heavy cooking vapours and odours, select from power levels 1 to
3. For short periods of cooking food with intensive vapours and a strong
aroma, e.g. when searing meat, select Booster setting B. Select the power
level you want by
pressing the or control.
Reducing power down from the Booster setting If power management is activated
(default setting), the fan automatically switches back to level 3 after 5
minutes.
Selecting the run-on time
It is advisable to run the fan for a few minutes after cooking has finished.
This helps to remove any lingering vapours and odours from the air. It also
reduces the risk of residues accumulating in the cooker hood and any resultant
odours. The run-on function enables the fan to continue running for a pre-
determined time before switching itself off automatically. After you have
finished cooking,
press the run-on control while the fan is still running: – Once: the fan will
switch itself off after 5 minutes (5 lights up). – Twice: The fan will switch
itself off after 15 minutes (15 lights up). – If you touch the run-on option
control again, the fan will remain on ( will go out).
27
Operation (Manual mode)
Switching the fan off
Push the deflector plate back in. The next time the deflector plate is pulled
out, the cooker hood will operate at power level 2 again. Or switch the fan
off with the On/Off
control . The symbol will go out.
Dimming/switching the hob lighting on/off
You can switch the hob lighting on and off by pulling the deflector plate out
and pushing it in or by pressing the lighting control .
The lighting will switch on at maximum brightness. With the lighting switched
on, press
and hold the lighting control . The brightness will gradually dim until you
release the control. Press and hold the lighting control again to increase the
brightness to the level required and then release it.
Power management
The cooker hood is fitted with a power management system. Power management
helps to save energy. It ensures that the fan power level is reduced
automatically and that the lighting is switched off. – If the Booster setting
has been
selected, the fan will automatically switch to level 3 after 5 minutes. – From
fan power levels 3, 2 or 1, the power will be reduced by one level after 2
hours and then in 30-minute stages until the fan finally switches off. – The
hob lighting will switch off automatically after 12 hours. You can deactivate
power management. Keep in mind that deactivating this function may increase
energy consumption.
28
Operation (Manual mode)
Activating/deactivating Power Management Switch off the fan and the lighting.
Press the fan run-on control for
approx. 10 seconds until the indicator for fan power level 1 lights up. Then
press in turn: – the lighting control , – the control, and then – the lighting
control . If Power Management is activated, the 1 and B indicators light up
constantly. When it is deactivated, the 1 and B indicators flash. Press the
control to deactivate Power Management. The 1 and B indicators will flash.
Press the control to activate Power Management. The 1 and B indicators will
light up constantly. Confirm the setting with the run-on option control . All
the indicator lights will go out. If you do not confirm your choice of setting
within 4 minutes, the cooker hood will revert to the old setting.
Safety switch-off
If Power management has been deactivated, the cooker hood will switch itself
off automatically after 12 hours if it has been left on (fan and hob
lighting). To switch it on again press the On/
Off control or the lighting control .
29
Energy saving tips
This cooker hood operates very efficiently and economically. The following
will help you to save even more energy when using it: – Ensure that there is
sufficient
ventilation in the kitchen when cooking. In extraction mode, if there is
insufficient air flow the cooker hood cannot operate efficiently and this
causes increased operating noise levels. – Always cook with the lowest
possible setting. This produces fewer cooking vapours, so you can use a lower
cooker hood power level and therefore benefit from reduced energy consumption.
– Clean or change the filters at regular intervals. Heavily soiled filters
reduce performance, increase the risk of fire and are unhygienic.
– Use the Con@ctivity function. The cooker hood will switch on and off
automatically at the optimum power level for the cooking you are doing, which
ensures low energy consumption.
– If you are operating the cooker hood manually, please note the following:
Check the power level selected on the cooker hood. A low power level is
usually sufficient. Only use the Booster setting when necessary. When a
large volume of cooking vapours are being produced, switch to a high power
level in good time. This is more efficient than operating the cooker hood for
longer to try to capture cooking vapours which have already been distributed
throughout the kitchen. Make sure that you switch the cooker hood off after
use. If cooking vapours and odours still need to be removed from the kitchen
air after cooking, use the run-on function. The fan will switch off
automatically after the selected run-on time.
30
Changing settings
Altering the operating hours counter for the grease filter(s)
You can set the operating hours counter to suit the type of cooking you do.
The factory default setting is a cleaning interval of 30 hours. – Select a
shorter time of 20 hours if
you fry a lot. – If you only cook occasionally, we
recommend that you still select a short time. This is to prevent grease
hardening on the filter(s) and making cleaning more difficult. – Select a
longer time of 40 or 50 hours if you use very little fat for cooking.
Switch off the fan and the lighting. Press the run-on control and the
operating hours control at the same time. The Grease filter symbol and one of
the fan power level indicators will flash. Fan power level indicators 1 to B
show the time set: 1……………………………………….. 20 hours 2……………………………………….. 30 hours
3……………………………………….. 40 hours B ………………………………………. 50 hours Press the control for
a shorter duration, or for a longer duration. Confirm your choice with the
operating hours control . All the indicator lights will go out. If you don’t
confirm your selection within 4 minutes, the cooker hood will automatically
revert to the original setting.
31
Changing settings
Altering or deactivating the charcoal filter operating hours counter
Charcoal filters are needed for recirculation mode. You can set the operating
hours counter to suit the type of cooking you do. It has to be deactivated for
extraction mode. It is set at the factory for 180 hours of use before the
filters need replacing. Switch off the fan and the lighting. Press the control
and the operating
hours control at the same time. The charcoal filter symbol and one of the fan
power levels will flash. Fan power level indicators 1 to B show the time set:
Indicator 1 ……………………….. 120 hours Indicator 2 ……………………….. 180 hours Indicator
3 ……………………….. 240 hours Indicator B …………………….. deactivated Select the duration
you want with
the or control. Confirm your choice with the
operating hours control . All the indicator lights will go out. If you do not
confirm your selection within 4 minutes, the cooker hood will automatically
revert to the original setting.
Deactivating power management
Keep in mind that deactivating this function may increase energy consumption.
Activating/deactivating Power Management Switch off the fan and the lighting.
Press the fan run-on control for
approx. 10 seconds until the indicator for fan power level 1 lights up. Then
press in turn: – the lighting control , – the control, and then – the lighting
control . If Power Management is activated, the 1 and B indicators light up
constantly. When it is deactivated, the 1 and B indicators flash. Press the
control to deactivate Power Management. The 1 and B indicators will flash.
Press the control to activate Power Management. The 1 and B indicators will
light up constantly. Confirm the setting with the run-on option control . All
the indicator lights will go out. If you do not confirm your choice of setting
within 4 minutes, the cooker hood will revert to the old setting.
32
Cleaning and care
Before proceeding with any
maintenance or cleaning task, the cooker hood must be disconnected from the
power supply (see “Warning and Safety instructions”).
Housing
General information Unsuitable cleaning agents can damage the surfaces and
control elements. Do not use any cleaning agents containing soda, acid,
chloride or solvent. Do not use any abrasive cleaning agents, e.g. powder
cleaners or cream cleaners and abrasive sponges, as well as pot scourers or
sponges which have been used previously with abrasive cleaning agents.
Moisture in the cooker hood can
cause damage. Make sure that water does not get into the cooker hood.
All external surfaces and control elements can be cleaned using hot water with
a small amount of washing-up liquid applied with a well wrung-out soft sponge
or cloth.
After cleaning, wipe the surfaces dry using a soft cloth.
Important information for appliances with stainless steel surfaces This
information does not apply to the control buttons. Stainless steel surfaces
can be cleaned with a non-abrasive cleaning agent designed specifically for
use on stainless steel. To prevent the surfaces from quickly becoming dirty
again, we recommend treating them with a stainless steel care product
(available from Miele).
Important information for the control elements
If soiling is not removed promptly, it could cause the control elements to
alter or discolour. Remove any soiling immediately.
The surface of the control elements can become damaged if they are cleaned
using stainless steel cleaning agents. Do not use stainless steel cleaning
agents on the control elements.
33
Cleaning and care
Important for appliances with glass surfaces Glass surfaces can be cleaned
using
a proprietary non-abrasive cleaning agent designed specifically for use on
glass.
You can clean the rear section of the deflector plate from the inside. Remove
the grease filters to do this.
Operating hours counter
The cooker hood registers the length of time for which it has been operated.
When the grease filter symbol or the charcoal filter symbol lights up, the
operating hours counters are signalling that the filters need to be cleaned or
replaced. You can set the operating hours counter to suit the type of cooking
you do (see “Changing settings”).
Reading the filter operating hours counter You can check the percentage of
time set already used before the filter needs replacing. Switch the fan on
with the On/Off
control . Press and hold the operating hours
control : – Once, to read the grease filter
operating hours. The grease filter symbol lights up. – Twice, to read the
charcoal filter operating hours. The charcoal filter symbol lights up. One or
more of the fan power level indicators will flash. The number of fan power
level indicators flashing shows the percentage of the operating time which has
already been used up. Indicator 1 …………………………….. 25 % Indicators 1 and 2
…………………… 50 % Indicators 1 to 3 …………………….. 75 % Indicators 1 to B …………………… 100
%
The number of operating hours used remains in the memory, even when the cooker
hood is switched off or there is a power cut.
34
Cleaning and care
Grease filters
Fire hazard
Oversaturated grease filters are a fire hazard. Clean the grease filters at
regular intervals.
The re-usable metal grease filters in the appliance remove solid particles
(grease, dust, etc.) from the kitchen vapours, preventing soiling of the
cooker hood. The grease filters must be cleaned at regular intervals.
Removing a grease filter
When handling a grease filter, be
careful not to drop it. This can result in damage to the filter and the hob
below. Make sure you hold the filter securely at all times when handling it.
Heavily soiled grease filters hinder air extraction and will lead to increased
levels of soiling in the cooker hood and in the kitchen.
Cleaning interval Accumulated grease solidifies over a longer period of time
and makes cleaning more difficult. The grease filters should therefore be
cleaned every 3 to 4 weeks. The filter operating hours control reminds you to
regularly clean the grease filters by illuminating the grease filter symbol .
Remove the grease filters from the slots on the front of the housing
Cleaning the grease filters by hand Clean the filters with a soft nylon
brush in a mild solution of hot water and a small amount of washing-up liquid.
Do not use “neat” washing up liquid.
Unsuitable cleaning agents Unsuitable cleaning agents can cause damage to the
surface of the filters if used regularly. Do not use: – cleaning agents
containing descaling
agents – powder cleaners, cream cleaners – aggressive multi-purpose cleaning
agents or spray cleaners for grease – oven sprays
35
Cleaning and care
Cleaning the grease filters in the dishwasher Place the grease filters upright
or
slightly inclined in the lower basket. Ensure the spray arm is not obstructed.
Use a commercially available household dishwasher detergent. Select a
dishwasher programme with a wash temperature between 50 °C and 65 °C.
Depending on the detergent used, cleaning the filters in a dishwasher may
cause the inside filter surfaces to become discoloured. This will not affect
the functioning of the grease filters in any way.
After cleaning After cleaning, leave the filters to dry
on an absorbent surface before replacing them. When removing the filters for
cleaning, also clean off any residues of oil or fat from the now accessible
housing to prevent the risk of these catching fire. Refit the grease filters.
Resetting the grease filter operating hours counter After cleaning, the
operating hours counter needs to be reset. Whilst the fan is switched on,
press the operating hours control for approx. 3 seconds, until only 1 is
flashing. The grease filter symbol goes out.
If you want to clean the grease filters before the operating hours counter has
reached its maximum: Press the operating hours
control for approx. 6 seconds, until only 1 is flashing.
Replacing the grease filters Regular usage and cleaning can cause the filter
surfaces to become worn. If you identify any damage, replace the grease
filters. Grease filters are available to order via the Miele Customer Service
Department (see end of these operating instructions for contact details) or
from your Miele dealer.
Charcoal filters
With recirculation mode, two charcoal filters must be fitted in addition to
the grease filters. These are designed to absorb cooking odours. Charcoal
filters are available to order via the Miele Webshop, the Miele Spare Parts
Department (see end of this booklet for contact details) or from your Miele
dealer. The type of charcoal filter required is listed under “Technical data”
at the back of this booklet.
36
Cleaning and care
Fitting/replacing charcoal filters The slots for the charcoal filters are
located above above the grease filters.
Remove the lid. It is held in position by magnets.
Take the charcoal filters out of their packaging.
Insert the charcoal filters into the slots as far as they will go.
Replace the lid. When to change the charcoal filters Replace the charcoal
filters when they no longer absorb kitchen odours effectively, and at least
every 6 months. The operating hours counter will remind you to replace the
charcoal filters by lighting up the charcoal filter symbol .
Resetting the charcoal filter operating hours counter After changing the
charcoal filters, the operating hours counter needs to be reset. To do this,
with the fan switched on,
press the operating hours control twice, then hold it for approx. 3 seconds
until only the 1 is flashing. The Charcoal filter symbol will go out. If you
want to replace the charcoal filters before the operating hours counter has
reached its maximum: Press the operating hours control twice and hold it for
approx. 6 seconds until only the 1 is flashing.
Disposing of charcoal filters Used charcoal filters can be disposed
of with normal household waste.
37
Cleaning and care
Reactivatable charcoal filters Reactivatable charcoal filters are available
for this cooker hood. They can be used several times after being reactivated
in the oven. Please follow the operating instructions supplied with the
filters.
Open the tab using a tool such as a screwdriver. Take hold of the tab to pull
the charcoal filter out.
Insert the charcoal filters into the slots as far as they will go.
Replace the lid.
38
Service
Contact in the event of a fault
In the event of any faults which you cannot remedy yourself, please contact
your Miele dealer or the Miele Customer Service Department.
In the UK, your appliance warranty is valid for 2 years from the date of purchase. However, you must activate your cover by calling 0330 160 6640 or registering online at www.miele.co.uk.
You can book a Miele Customer Service Department call-out online at www.miele.com/service. Contact information for the Miele Customer Service Department can be found at the end of this document. Please quote the model identifier and serial number of your appliance (Fabr./ SN/Nr.) when contacting the Miele Customer Service Department. This information can be found on the data plate. Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet.
Position of the data plate
The data plate is located on the casing of the cooker hood and is visible when
the cover for the charcoal filter slots is removed.
Warranty
For information on the appliance warranty specific to your country please
contact Miele. See back cover for address.
39
INSTALLATION
Installation
Before installation Before installation, it is important
to read the information given on the following pages as well as the “Warning
and Safety instructions” at the beginning of this booklet.
Installation recommendations
– To achieve optimum vapour extraction, the cooker hood must be positioned
centrally over the hob, not to the side.
– The hob should be no wider than the cooker hood, and if possible, it should
be narrower.
– The installation area must be easily accessible. The cooker hood should be
easily accessible and easy to dismantle in the event that service is required.
This should be taken into consideration when planning the position of
cupboards, shelves, ceilings or features in the vicinity of the cooker hood.
Installation materials
1 vent connection for exhaust ducting 150 mm. 1 non-return flap for fitting
into the exhaust socket on the motor unit (not needed for recirculation mode).
Depending on the model, the non-return flap may already be fitted. 2 mounting
brackets for installation in the cabinet
1 drilling template
1 spacer strip for concealing the gap between the rear of the appliance and the wall 40
INSTALLATION
6 screws, 4 x 15 mm 4 screws, M4 x 16 mm
MontagIenstallaMtioonntajMeontagMgoionterMinogntagAesmennus
Installation plan See the installation plan for details on the individual
steps involved in the installation of this appliance. Installation materials
for recirculation mode You need the following optional accessories for
recirculation mode:
DUU 15x installation kit contains a directional unit socket, hose and hose
clips (DUU 150 for the top of the cabinet or DUU 151 for the sides or front of
the cabinet)
Installation
41
INSTALLATION
Installation
Appliance dimensions
Dia. 1: DA 4640 in a 600 mm wide cabinet.
The drawing is not to scale 42
INSTALLATION
Dia. 2: DA 4940 in a 900 mm wide cabinet.
Installation
The drawing is not to scale See diagram 1 for side view Footnotes for diagrams
1 to 2: a The mounting brackets are designed for cabinets with sides that are
between
16 and 19 mm thick. b Alternative exhaust duct at the back. c Cut-out for
extraction mode or recirculation mode with DUU 150 conversion kit
43
INSTALLATION
Installation
d Wall unit can be fitted with partition wall after installation. Slots for
the grease filters, and with recirculation mode for the charcoal filters, must
remain accessible.
Installation distance between cooking appliance and cooker hood (S)
Risk of heat damage.
The rising heat generated by a gas hob may damage the cooker hood. Fitting
this cooker hood over a gas hob is not permitted.
When planning the installation distance between the cooking appliance and the bottom of the cooker hood, the information provided by the cooking appliance manufacturer must be taken into account. Unless a greater distance is specified by the cooking appliance manufacturer, the minimum safety distances indicated below must be ensured. Please also observe the information given under “Warning and safety instructions”.
Cooking appliance Electric hob Electric grill, electric fryer
Minimum distance S 450 mm 650 mm
44
INSTALLATION
Installation
Connection for air extraction
If the cooker hood is used at the
same time as a heating appliance that relies on oxygen from the same room,
there is a risk in certain circumstances of toxic fumes building up. It is
essential that the “Warning and Safety” instructions are observed. The cooker
hood should be installed according to local and national building regulations.
Seek approval from the building inspector where necessary.
Only use smooth pipes or flexible exhaust ducting made from approved non-
flammable materials for exhaust ducting.
Any constriction of the air throughput will reduce extraction performance and
increase operating noise. Flue
If the exhaust air is to be ducted into a flue, the ducting must be directed
in the flow direction of the flue. If the flue is used by several ventilation
units, the cross-section of the flue must be large enough.
To achieve the most efficient air throughput with the lowest noise levels,
please note the following: – The diameter of the exhaust ducting
must not be smaller than the crosssection of the exhaust duct (see “Appliance
dimensions”). This applies in particular when using flat ducting. – The
exhaust ducting should be as short and straight as possible. – Only use wide
radius bends. – The exhaust ducting must not be kinked or compressed. – All
connections must be strong and airtight. – If the exhaust ducting has flaps,
these must be opened whenever the cooker hood is switched on.
45
INSTALLATION
Installation
Non-return flap Use a non-return flap in the exhaust
system. A non-return flap ensures that when the cooker hood is not in
operation, the duct is closed to prevent unwanted exchange of room air and
outside air. If the exhaust is ducted through an outside wall, a Miele wall
vent or roof vent (available as an optional accessory) is recommended. Both of
these have a built-in non-return flap. If the on-site ventilation system does
not have a non-return flap, one is supplied with the cooker hood. The non-
return flap is fitted in the exhaust socket of the fan.
Condensation If the exhaust ducting is to run through cool rooms or ceiling
space, for example, the significant variations in temperature between the
different areas can cause condensation to form. Insulate the exhaust ducting
to reduce temperature variations. If the exhaust ducting is to be laid
horizontally, it must be laid with a downwards sloping gradient of at least 1
cm per meter. This is to ensure that condensation cannot drain back into the
cooker hood.
In addition to insulating the exhaust ducting, it is advisable to also install
a condensate trap for collecting and evaporating any potential condensation.
Condensate traps for 125 mm or 150 mm diameter exhaust ducting are available
as optional accessories. When installing a condensate trap, ensure that it is
positioned vertically and as closely as possible to the cooker hood above the
exhaust connection. The arrow on the casing indicates the direction of
airflow.
Miele shall not accept warranty claims for any functional defects or damage
caused by inadequate exhaust ducting.
46
INSTALLATION
Silencer
Installation
To reduce noise levels even further, a silencer (optional accessory) can be installed in the exhaust ducting.
In recirculation mode, the silencer needs to be positioned between the exhaust vent and the exhaust grille . Check that there is sufficient space.
In extraction mode, the silencer not only reduces noise from the fan outside the house, but also sounds originating outside reaching the kitchen through the exhaust ducting (e.g. traffic noise). For this reason, the silencer must be positioned as close as possible to the ducting exit .
47
INSTALLATION
Installation
Electrical connection
The cooker hood is supplied with a mains cable with moulded plug ready for
connection to a suitable earthed socket. If the socket is not easily
accessible or a fixed connection is envisaged, ensure that a suitable means of
disconnection is provided on the installation side for each pole.
Risk of fire from overheating.
Connecting the cooker hood to multi-socket adapters or extension cables can
overload the cables. For safety reasons, do not use an extension cable or
multi-socket adapter.
The electrical system must comply with local and national safety regulations
(BS 7671 in the UK). For safety reasons, we recommend using a type residual
current device (RCD) in the relevant electrical installation for connecting
the cooker hood. If the mains connection cable is damaged, it must only be
replaced with a specific mains connection cable of the same type (available
from the Miele Customer Service Department). For safety reasons, such
replacement may only be carried out by a qualified specialist or the Miele
Customer Service Department. These operating instructions and the data plate
indicate the nominal power consumption and the appropriate fuse rating.
Compare this information with the data of the on-site electrical 48
connection. If in any doubt, consult a qualified electrician. Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation. As described, for example, in the current version of VDE-AR-E 2510-2.
Technical data
Fan motor Hob lighting Total rated load Mains voltage, frequency Fuse rating Length of mains connection cable Weight DAS 4640 DAS 4940
90 W 3 W
93 W AC 230 V, 50 Hz
10 A 1.5 m
12 kg 15 kg
WiFi module Frequency band Maximum transmission power
2.4002.4835 GHz < 100 mW
Optional accessories for recirculation mode
For recirculation mode, installation kit DUU 150 or DUU 151 and charcoal
filters DKF 31-P or DFK 31-R (reactivatable) must be purchased as optional
accessories. The packs contain 2 charcoal filters.
49
Technical data
EU Conformity declaration
Miele hereby declares that this cooker hood complies with Directive
2014/53/EU. The complete text of the EU declaration of conformity is available
from one of the following internet addresses: – Products, Download from
www.miele.ie – For service, information, operating instructions etc: go to
www.miele.ie/
domestic/customer-information-385.htm and enter the name of the product or the
serial number
UK Conformity declaration
Miele hereby declares that this cooker hood complies with UK Radio Equipment
Regulations 2017, as amended. The complete text of the UK declaration of
conformity is available from one of the following internet addresses: –
Products, Download from www.miele.co.uk – For service, information, operating
instructions etc: go to www.miele.co.uk and
enter the name of the product or the serial number
Note for test institutes
Energy efficiency must be calculated using extraction mode. The cooker hood is
set up ex-works for recirculation mode. To re-set it for extraction mode the
operating hours counter for the charcoal filter(s) has to be deactivated (see
“Before using for the first time”).
50
Technical data
Data sheet for household cooker hoods
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE Model name/identifier Annual Energy Consumption (AEChood) Energy
efficiency class Energy efficiency index (EEIhood) Fluid Dynamic Efficiency
(FDEhood) Fluid Dynamic Efficiency class A (most efficient) to G (least
efficient) Lighting Efficiency (LEhood) Lighting Efficiency class A (most
efficient) to G (least efficient) Grease Filtering Efficiency Grease Filtering
Efficiency class A (most efficient) to G (least efficient) Airflow at best
efficiency point
Air flow (min. speed)
Air flow (max. speed)
Air flow (intensive or boost setting)
Max. air flow (Qmax)
Air pressure at best efficiency point Airborne acoustical A-weighted sound
power emissions (min. speed) Airborne acoustical A-weighted sound power
emissions (max. speed) Airborne acoustical A-weighted sound power emissions
(intensive or boost setting) Electrical power input at best efficiency point
Power consumption in off mode (Po) Power consumption in standby mode (Ps)
Nominal power of lighting system Average illumination of the lighting system
on the cooking surface Time increase factor
DAS 4640 27,4 kWh/year A+ 38,5 37,3
A 105,0 lx/W
A 86,2%
B 362,2 m3/h 183 m3/h 380 m3/h 600 m3/h 600 m3/h 365 Pa 37 dB 52 dB 64 dB
98,5 W W 0,30 W 3,0 W 315 Ix 0,7
51
Technical data
Data sheet for household cooker hoods
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE Model name/identifier Annual Energy Consumption (AEChood) Energy
efficiency class Energy efficiency index (EEIhood) Fluid Dynamic Efficiency
(FDEhood) Fluid Dynamic Efficiency class A (most efficient) to G (least
efficient) Lighting Efficiency (LEhood) Lighting Efficiency class A (most
efficient) to G (least efficient) Grease Filtering Efficiency Grease Filtering
Efficiency class A (most efficient) to G (least efficient) Airflow at best
efficiency point
Air flow (min. speed)
Air flow (max. speed)
Air flow (intensive or boost setting)
Max. air flow (Qmax)
Air pressure at best efficiency point Airborne acoustical A-weighted sound
power emissions (min. speed) Airborne acoustical A-weighted sound power
emissions (max. speed) Airborne acoustical A-weighted sound power emissions
(intensive or boost setting) Electrical power input at best efficiency point
Power consumption in off mode (Po) Power consumption in standby mode (Ps)
Nominal power of lighting system Average illumination of the lighting system
on the cooking surface Time increase factor
DAS 4940 24,8 kWh/year A++ 33,6 39,8
A 95,0 lx/W
A 86,2%
B 388,7 m3/h 203 m3/h 404 m3/h 627 m3/h 627 m3/h 381 Pa 36 dB 51 dB 62 dB
103,4 W W 0,30 W 3,0 W 285 Ix 0,6
52
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk
Australia
Ireland
Miele Australia Pty. Ltd.
Miele Ireland Ltd.
ACN 005 635 398
2024 Bianconi Avenue
ABN 96 005 635 398
Citywest Business Campus
Level 4, 141 Camberwell Road
Dublin 24
Hawthorn East, VIC 3123
Tel: (01) 461 07 10
Tel: 1300 464 353
Fax: (01) 461 07 97
Internet: www.miele.com.au
E-Mail: info@miele.ie
China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing’ an District 200040 Shanghai, PRC Tel: +86 21 6157 3500 Fax: +86 21 6157 3511 E-mail: info@miele.cn, Internet: www.miele.cn
Internet: www.miele.ie
Malaysia Miele Sdn Bhd Suite 12-2, Level 12 Menara Sapura Kencana Petroleum
Solaris Dutamas No. 1 Jalan Dutamas 1 50480 Kuala Lumpur, Malaysia Phone:
+603-6209-0288
Hong Kong, China
Fax: +603-6205-3768
Miele (Hong Kong) Ltd. 41/F – 4101, Manhattan Place 23 Wang Tai Road Kowloon Bay, Hong Kong Tel: (852) 2610 1025 Fax: (852) 3579 1404 Email: customerservices@miele.com.hk Website: www.miele.hk
New Zealand Miele New Zealand Limited IRD 98 463 631 8 College Hill Freemans
Bay, Auckland 1011 New Zealand Tel: 0800 464 353 Internet: www.miele.co.nz
Singapore
India
Miele Pte. Ltd.
Miele India Pvt. Ltd.
29 Media Circle
1st Floor, Copia Corporate Suites, #11-04 ALICE@Mediapolis
Commercial Plot 9,
Singapore 138565
Mathura Road, Jasola,
sTel: +65 6735 1191
New Delhi – 110025
Fax: +65 6735 1161
E-mail: customercare@miele.in
E-Mail: info@miele.com.sg
Website: www.miele.in
Internet: www.miele.sg
South Africa Miele (Pty) Ltd. 63 Peter Place Bryanston 2194 P.O. Box 69434
Bryanston 2021 Tel: (011) 875 9000 Fax: (011) 875 9035 E-mail:
info@miele.co.za Internet: www.miele.co.za
Thailand Miele Appliances Ltd. BHIRAJ TOWER at EmQuartier 43rd Floor Unit
4301-4303 689 Sukhumvit Road North Klongton Sub-District Vadhana District
Bangkok 10110, Thailand
United Arab Emirates Miele Appliances Ltd. Showroom 1 Eiffel 1 Building Sheikh
Zayed Road, Umm Al Sheif P.O. Box 114782 – Dubai Tel. +971 4 3044 999 Fax.
+971 4 3418 852 800-MIELE (64353) E-Mail: info@miele.ae Website: www.miele.ae
Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany
DAS 4640, DAS 4940 en-GB
M.-Nr. 12 039 040 / 01
References
- Welcome to Miele Australia - Immer Besser
- Home
- Service
- Welcome to Miele – Immer Besser.
- Service
- Support and information