hubble Guardian Pro Wearable Sleep Quality Tracker User Guide

hubble Guardian Pro Wearable Sleep Quality Tracker

For a full explanation of all features and instructions, please refer to the User’s Guide (available for download from support.hubbleconnected.com).

Contents Inside Box

WARNING
Guardian Pro is not a medical device. It is not intended to diagnose, treat, cure, or alleviate any disease or health condition, including, but not limited to, Sudden Infant Death Syndrome (SIDS). False positive or false negative readings about your baby’s patterns are a potential risk. This product is only intended to assist you in tracking your baby’s wellbeing and is not intended to replace you as a caregiver. You are responsible for the health and wellbeing of your baby and should follow safe sleep, health, and care guidelines. This product is not FDA approved. To obtain optimal and safe user experience, please carefully read, understand, and follow all instructions and warnings prior to use. Also, read and follow recommendations from the American Academy of Pediatrics, including Safe Sleep guidelines found at www.healthychildren.org.

Strangulation Hazard: Children have STRANGLED on cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.

Overview of Product

Base Station

1. Brightness up
2. Brightness down
3. Night light
4. ConnectChat™
5. Soothing sound
6. Volume down
7. Volume up
8. Charging indicator for Smart Sensor
9. Charging pins
10. Power ON-OFF switch
11. Pairing LED indicator
12. Pair Button (HubbleClub and BT speaker)
13. Power Socket
14. Power On indicator

Smart Sensor

1. Oxygen sensor
2. Power ON-OFF switch
3. Charging ports
4. Heart rate sensor

Baby Unit

1. Light Sensor
2. Camera Lens
3. Infrared LEDs (x 8, for night vision)
4. High Sensitivity Microphone
5. Magnetic mount
6. Power/Link indicator
7. PAIR button
8. Night Light
9. Speaker
10. Power Socket
11. Temperature Sensor

Parent Unit

1. Microphone

2. Touch screen display

3. Power button
   Press and Hold to turn the Parent Unit ON/OFF. Once press to turn the Power Saving Mode ON/OFF.

4. Volume Up/Down button Press to decrease / increase Volume level.

5. Sound Level LEDs (Green, Green, Amber, Red)

6. Reset pin hole (recessed – use small pin)

7. Power Socket

8. Power LED

   • RED when Power OFF charging.
   • GREEN when Power ON with battery only.
   • ORANGE when Power ON charging.

9. Ring Stand

10. Speaker

11. Antenna

12. Flashlight

Getting Started

Power on Base Station
Connect the USB type-C plug of the power adapter to Base Station and the other end to a suitable electrical outlet. Only use the enclosed adapter (5V DC / 1000mA).

Connecting the Power Supply of the Parent Unit

• Connect the USB Type-C plug of the power adapter to the parent unit and the other end to the electrical outlet. Only use the enclosed adapter (5V DC / 1500mA).
• A rechargeable battery (Lithium-ion battery 2100mAh) inside the Parent Unit allows you to move it without losing the link and picture from the Baby Unit. We recommend charging for at least 4 hours before first use, and when the Parent Unit indicates the battery is low.
• Press and hold the POWER button on the top of the Parent Unit to turn it ON/OFF.
• Flip out the stand on the back of the Parent Unit and rotate it by 90 degrees to set up the desktop stand.

Connecting the Power Supply for the Baby Unit

• Insert the DC plug of the power adapter into the DC socket on the back of the Baby Unit.
• Connect the other end of the power adapter to a suitable electrical outlet.
• The baby unit turns on and the power indicator lights in Green color.

Note Only use the supplied power adapter (DC5V/1000mA).

(Optional) Fixing magnetic mount on the wall

• Mark the position of the screw holes on the wall.
• Install wall anchors (Not provided) suitable for the wall type and mounting screws if needed.
• Fasten the mounting screws (Not provided) on the wall.
• Position the cable behind the base as shown in the picture before attaching the base on the wall.

Setting up Guardian Pro to HubbleClub by Hubble Connected App

Install HubbleClub by Hubble Connected App

• Scan the QR code with your smart device and download HubbleClub by Hubble Connected App from the App Store for iOS devices or from the Google Play™ Store for Android™ devices.
• Install HubbleClub by Hubble Connected App on your device.
• Open the HubbleClub by Hubble Connected App on your compatible smartphone or tablet, follow the instructions of HubbleClub App to create your HubbleClub account.

View on Compatible Smartphones and Tablets

1. Open the HubbleClub by Hubble Connected App on your compatible smartphone or tablet.
2. Select Wellness on home page, then tap Guardian Pro and Guardian Camera to access to camera setup, follow the in-app instructions to connect to your device.

Connect Base Station to HubbleClub by Hubble Connect App

1. Slide the Power On/Off switch to ON to turn Base Station on.
2. Open the HubbleClub by Hubble Connected App on your compatible smartphone or tablet, select Wellness on home page, then tap Guardian Pro and Guardian+ to access to Base Station setup.
3. Press and hold Pair ****button at the bottom of Base Station, you will hear a voice prompt “Ready for Pairing” when the device enters HubbleClub App pairing mode, follow the in-app instructions to connect Base Station to your account.
4. If registration fails or connection cannot be completed during 60s, connection mode will be turned off, please try again with steps 2 & 3.
5. Full control and full features can be accessed with HubbleClub App.

Please take note of the following minimum system requirements:

Smartphones/Tablets: iOS 12.0, Android™ 8.0
Wi-Fi ® requirements: At least 0.6 Mbps upload bandwidth per Smart Monitoring Companion, test your Internet speed at: http://www.speedtest.net/

Operation of Base Station

Control Night Light

1. Tapping the Night Light icon ****on the top of Base Station will change the color of night light. Tapping again with cycle all colors.
2. The brightness of night light can be adjusted by tapping the brightness up and brightness down icons.

Control Soothing Sound

1. Tap the Soothing Sound ****icon on the top of Base Station to change the soothing sound.
2. The volume of the soothing sound can be adjusted by tapping the volume up and volume down icons.

ConnectChat™
ConnectChat™ in Guardian Pro is designed in such a way that both parent and child can send voice recorded messages to each other.

1. Tap and hold ConnectChat™ ****icon until a beep tone is heard from the Base Station, release tapping and start recording a voice message. (A single voice message can have maximum recording time of 20 sec.)
2. Tap ConnectChat™ ****icon again to stop the recording and send voice massage to the smartphone registered in the HubbleClub App.
   • Parent will receive an app notification when new voice message has arrived.
   • Parent in reply can record their voice message through the app creating a bi-directional conversation.
3. When a new voice message is received, the night light of Base Station will blink, tap ConnectChat™ ****icon to listen the voice massage from HubbleClub App.

Use Base Station as a BT Speaker

1. Press and hold the Pair ****button on the bottom of Base Station for 2s. You will hear a beep tone and the Pair LED indicator blinks in blue color when the device enters BT pairing mode.
2. Go to the Set-Up menu of your mobile phone. Then go to BT Connection.
3. Find the Device name “Guardian Audio” and connect.
4. If the connection fails, please try again by going through steps 1 to 3.
5. Stream the audio from your mobile phone and listen to it in Base Station.

Note: Once BT is disconnected, reactive BT by short pressing Pair ****button, and reconnect Base Station on your mobile phone.

Using of Smart Sensor

Device Power and Charging

1. Install the power adaptor and insert the plug into Base Station.
2. Power on and off using the switch under the device.
3. Charge the device by laying the sensor on the charging pins of the base station. The base station must be turned on for the Sensor to charge.
4. Please place the sensor as the illustration below for charging.
5. The charging indicator will turn red during charging and will turn to blue when the senor is fully charged.
   Tip: Switch off the sensor to charge when the senor is extremely low in battery.

Device Placement

1. Place the sensor on the smallest part of your child’s ankle just above the ankle bone. The sensor must be facing the outside of the ankle (as shown in the picture below). Use the Velcro on the straps to secure the device in place.
2. To avoid discomfort, red marks, pressure sores or blister due to incorrect use, ensure the device is fitted snugly but not wrapped too tight. Different strap lengths are available for different leg widths for maximum comfort.
3. The operation distance between the wearable sensor and base station works best between 6-9 feet (2-3m).

Touch screen operation

• Swipe up at the screen bottom to pop up the menu bar.
• Swipe down at the screen bottom to hide the menu bar.
• Scroll left/right on the menu bar to see all the options.

Display icons

Note: The feature is not available in this version when the icons appear grayed out. * The playlist appears only if you make the audio recording via Hubble app.

General Information

If your product is not working properly, read this Quick Start Guide or the online User’s Guide.
Contact Customer Service:

Live Chat: hubbleconnected.com
Email: [email protected]
Online warranty registration: https://hubbleconnected.com/warranty
Online Product Registration: https://hubbleconnected.com/apps/product- registration

Consumer Products and Accessories Limited Warranty (“Warranty”)
Thank you for purchasing this Hubble Smart Nursery branded product manufactured by Hubble Baby (HK) Limited (“HUBBLE”).

What Does this Limited Warranty Cover?
Subject to the items listed below in the section “What is not Covered” HUBBLE warrants that this Hubble connected branded product (“Product”) will be free from defects in material and workmanship under normal use for a period of 1 year from the date of purchase and that any certifi ed accessory (“Accessory”) sold for use with this product will be free from defects in materials and workmanship under normal use for a period of 90-days from the date of purchase. This Limited Warranty is your exclusive warranty and is not transferable.

What is not covered?
This Limited Warranty excludes and does not cover:

• Normal deterioration or wear resulting from use;
• Damage caused by or resulting from misuse, abuse, or accident;
• Damage caused by or resulting from improper operation or storage;
• Damage caused by or resulting from contact with foreign substances, including, but not limited, to liquid, water, rain, humidity, perspiration, sand, dirt, and/or food;
• Damage caused by or resulting from the use of Non-Hubble Smart Nursery branded or certifi ed Products or Accessories or other peripheral equipment;
• Damage caused by or resulting from modifi cations, alterations, tampering, improper installation, or repairs by someone other than Hubble connected or their authorized representatives;
• Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories; and,
• Periodic maintenance, repair and replacement of parts due to normal wear and tear.

What Other Limitations Are There?
THIS LIMITED WARRANTY SETS FORTH THE ENTIRE LIABILITY OF HUBBLE AND CONTAINS YOUR SOLE AND EXCLUSIVE REMEDY. OTHER THAN THIS LIMITED WARRANTY, HUBBLE MAKES NO ADDITIONAL REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF YOUR STATE DOES NOT PERMIT THE DISCLAIMER OF WARRANTIES, THEN THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. REPAIR OR REPLACEMENT IS YOUR SOLE AND EXCLUSIVE REMEDY AGAINST HUBBLE AND Hubble Smart Nursery. IN NO EVENT SHALL HUBBLE OR Hubble Smart Nursery’s LIABILITY TO REPAIR OR REPLACE YOUR PRODUCT OR ACCESSORY EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT AND ACCESSORY AND HUBBLE AND Hubble Smart Nursery’s TOTAL LIABILITY FOR DAMAGES ARISING FROM THIS LIMITED WARRANTY SHALL NOT EXCEED THE PRICE YOU PAID FOR THE PRODUCT AND ACCESSORY REGARDLESS OF WHETHER SUCH CLAIM ARISES UNDER CONTRACT, STATUTE, TORT OR OTHERWISE. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL HUBBLE OR Hubble Smart Nursery BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES. ALL DISCLAIMERS, LIMITATIONS OF LIABILITY AND MODIFICAITONS OF WARRANTIES STILL APPLY EVEN IF THE LIMITED REMEDY OF REPAIR AND REPLACEMENT FAILS OF ITS ESSENTIAL PURPOSE. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specifi c legal rights, and you may have other rights that vary from one jurisdiction to another.

Who is covered?
This Warranty extends only to the fi rst consumer purchaser and is not transferable.

What will HUBBLE do?
HUBBLE or its authorized distributor at its sole discretion will, at no charge, repair or replace any Products or Accessories that do not conform to this Warranty. In the event that replacement is necessary to remedy a defect in material or workmanship, HUBBLE may use new or remanufactured products, accessories or parts of equal quality to the original Product or Accessory.

How to Obtain Warranty Service or Other Information?
To obtain service or information:

• Live Chat: hubbleconnected.com
• Email: [email protected]
• Online warranty registration: https://hubbleconnected.com/warranty
• Online Product Registration: https://hubbleconnected.com/apps/product-registration

You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a HUBBLE Authorized Repair Center.

You must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, (e) your name, address, email address and telephone number. These terms and conditions constitute the complete warranty agreement between you and HUBBLE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by HUBBLE or representations made by any agent, employee or staff of HUBBLE, that may have been made in connection with your purchase of any Product and/or Accessory.

FCC and IC regulations

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. Industry Canada. This device complies with Industry Canada license-exempt RSS standard(s): Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Download User Guide from website: support.hubbleconnected.com

Manufactured, distributed and sold by Hubble Baby (HK) Limited. Apple logo is trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play and Android are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. All rights reserved.

References

• Hubble Connected - Keeping You Connected | HubbleConnected.com
• HealthyChildren.org - From the American Academy of Pediatrics
• Speedtest by Ookla - The Global Broadband Speed Test
• Hubble Connected
• Hubble Connected

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>