boAt Aavante Bar 3200D 350W RMS 5.1 Channel Soundbar with Powerful Subwoofer User Manual

boAt Aavante Bar 3200D 350W RMS 5.1 Channel Soundbar with Powerful

Subwoofer

USER MANUAL
Thank you for choosing the boAt Aavante Bar 3200D as the audio source for your home. Discover a new level of immersive, cinematic audio experi­ence at home with the boat Aavante Bar 3200D. With a powerful 350W RMS total output, this sound bar brings every aspect of your entertain­ment be it a song, show or movie to life. The 5.1 channel sound system provides a balanced surround sound for your movies, music and even video games and you can experience cinematic sound that revolves around you. Stay plugged into the sound with an array of wired connec­tions, USB and Bluetooth® wireless technology. Bring your home to life with the boAt Aavante Bar 3200D. We request that this installation guide be carefully read for proper usage of the device.

Dolby Audio : It is equipped with Dolby Audio technology for an enthrall­ing, breath-taking auditory experience. Dolby Audio features greatly improved sound, more channels, less compression, and a more realistic audio experience as compared to standard-definition audio formats. At higher bit rates it is virtually indistinguishable from the source audio. Bring your home to life with boAt AAVANTE BAR 3200D.

COMPONENTS LIST

• 1N Soundbar
• 2N Satellites
• 2N Screws for wall mount
• 1N User Manual
• 1N Warranty Card
• 1N Power Cable
• 1N Power Adapter
• 1NSubwoofer
• 1N Remote
• 1N DC Cable
• 1N Brand Catalogue,
• 1N Aux Cable
• 2N Connection Cable

SAFETY & WARNINGS 

Caution

• Read the safety, installation and operating instructions in this user guide before operating the product.
• Power and speaker wires should be routed so that they are not likely to be walked upon, kicked or pressed by items placed on or against them. Pay special attention to cords from plugs, power receptacles and the point where they exit from the product.
• The product should be situated away from hear sources such as radiators, stoves or other products, including amplifiers that produce heat. Naked flames such as lighted candles should not be placed on this product.
• To reduce the risk of fire or electric shock, do not expose the product to dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool.
• Never insert objects into this product through openings as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock.
• Do not use attachments or accessories not included with this product.
• Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall causing serious injury to someone or serious damage to the product. Any mounting of the product should follow the instructions in this user guide.
• Do not attempt to service this product by yourself, as opening or remov­ing covers may expose you to potentially dangerous voltage or other hazards. Refer all servicing and repairs to qualified service personnel.

OVERVIEW

1. Rear Speakers
2. RS input
3. Soundbar
4. Subwoofer
5. RS output
6. Soundbar ports
7. Subwoofer input (from soundbar)
8. 24V Output (to soundbar)
9. Power input (subwoofer)
10. Power input (rear speaker)
11. Power adaptor (rear speaker)
12. Power cord (subwoofer)

SOUNDBAR PORTS

 | HDMl(ARC)| Use to connect compatible devices using an HDMI cable (not provided
---|---|---
2| OPTICAL IN| Use to connect compatible devices using an optical cable (not provided)
3| COAXIAL| Use to connect compatible devices using the coaxial cable (not provided)
4| AUX IN| Use  to      connect      compatible       devices      using

3.Smm-3.Smm stereo jack cable (provided)

5| USBIN| Use to connect a flash drive for direct MP3 playback (FAT32 format and 64GB max)
6| SW OUT| Use to connect the subwoofer
7| DC IN| Used to connect the DC output jack of subwoofer

LED DISPLAY

SOUNDBAR CONTROL

1. (M) :Press to select your preferred input mode (BT/OPTICAL/COAXIAL/HDMI(ARC)/USB/AUX).
2. (BT) :Press to switch BT Pairing Mode,hold for 3S to disconnect,and go to pairing mode.
3. (-): Long press to go back to the previous track (Bluetooth/USB mode only). Short press in steps to decrease volume.
4. (+): Long press to skip to the next track (Bluetooth/USB mode only). Short press in steps to increase volume
5. Play/Pause (Bluetooth/USB mode only).
6. :Short press to turn the unit on and off.

REMOTE CONTROL

INSTALLATION

Sound bar will be connected with rear speakers automatically as sooon the unit power on, the user does not need to get them paired manually. If above automatic connection is unsuccessful, please follow the steps below to connect manually: 1-For soundbar: Long press the “play/pause” button on remote control for 3 seconds to enter the pairing mode; the soundbar will ONLY stay in pairing mode for one minute. The soundbar display will show “PAIR” for 2 seconds when entering pairing mode.

2-For rear speakers: Long press the pair button on the back of the rear speaker for 3 seconds to enter the pairing state, rear speakers will ONLY stay in pairing mode for one minute.

After completing the above 2 steps, the audio will automatically connect within 10 seconds.

Note: When the soundbar is connected to rear speakers, if you press and hold the pair button on the back of the rear speaker for 3 seconds by mistake, they will automatically reconnect after disconnecting for 1 minute.

Rear Speakers LED indicator status:

• The red light flashes quickly : auto pairing status.valid for 15 minutes after power on.
• The red light flashes slowly : stop pairing
• The solid red light : System connected.
• The red light flashes very slowly : System in sleep mode.

PLACING THE SOUNDBAR ON AN ENTERTAINMENT UNIT

If your TV is placed on an entertainment unit, you can place the sound bar directly in front of the TV stand, centred with the TV screen. If the surface of the table is flat, the soundbar stays firm on its metal feet.

WALL MOUNTING THE SOUNDBAR

This soundbar can be mounted on your wall. Follow the instructions below:

Note : If you aren’t confident in mounting this product yourself, please seek advice from a qualified trades person.

1. Mark and drill two parallel holes, 720mm apart on the wall. Secure the supplied anchors and screws into the holes. Ensure the screws are protruding 5mm from the wall.
   Note : Anchors are only required when mounting onto a solid wall.

2. Hang the soundbar on the fastening screws.

3. Gently push the sound bar in a downward direction to lock and secure in place.

OPERATION

Power ON/OFF
Press the Power on/off button on the remote control or soundbar control panel to turn the unit on or switch it off.

HDMl(ARC)
Connect an HDMl(ARC) compatible device to the HDMl(ARC) port on the soundbar by an HDMI cable. Select HDMl(ARC) mode either by pressing the ARC button on remote control or repeatedly pressing the MODE button on the soundbar control panel until ARC gets displayed on the LED screen.
Ensure HDMl(ARC) is selected as the TV’s audio output, then adjust the volume of soundbar by volume up and volume down buttons on the remote control or soundbar control panel.

AUX
Connect a compatible device using a 3.5mm stereo jack cable. Select AUX mode either by pressing the Mode button on your remote control or soundbar control panel repeatedly until AUX is displayed on the LED screen.
Ensure the connected device is producing audio signal, then adjust the volume of soundbar by pressing the volume up or volume down buttons on the remote control or soundbar control panel.

Optical
Connect a compatible device to the Optical input on the soundbar by a digital optical cable. Select OPT mode either by pressing the MODE button on your remote control or soundbar control panel repeatedly until OPT is displayed on the LED screen. Ensure Optical SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar by pressing the volume up and volume down buttons on the remote control or soundbar control panel.

Coaxial
Connect a compatible device to the COAXIAL port on the soundbar using a digital coaxial cable. Select COAX mode either by pressing the MODE button on your remote control or soundbar control panel repeatedly until COA is displayed on the LED screen. Ensure Coaxial is selected as the TV’s audio output, then adjust the volume of the sound bar using the volume up and volume down buttons on the remote control or soundbar control panel.

Bluetooth
Press the BT button on the remote control or repeatedly press the MODE button on the soundbar control panel until BT gets displayed on the LED screen. The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device you wish to connect is also in pairing mode and search for “Aavante Bar 3200D” in its device list. The LED display on the sound bar will stop flashing and remain constant when the two devices pair (The soundbar will now automatically re-pair with this device whenever it is within range and has Bluetooth turned on). Once paired, the remote control can be used to play, pause and navigate between tracks on compatible iOS and Android devices.

USB Mode
The soundbar is compatible with USB flash drives up to 64GB in size and can directly play MP3 and WAV audio files. Simply insert a compatible drive into the USB port on the back of the sound bar and the sound bar will automatically switch to USB mode and play the first compatible track. The media controls on the remote control can be used to play, pause and navigate between tracks on the flash drive and the LED display will indicate the current track time. USB repeat mode (also accessed via the remote control) enables single track repeat (ONE) and all track repeat (ALL). The media player also has a memory function that will recall and continue from the last played point when a USB flash drive that has previously been used with the sound bar is reinserted.

Note:
Adjust the TV to PCM audio output format, when your TV is playing non-Dolby video; otherwise, adjust it back to original audio format, when playing Dolby Digital video.

Equalizer Modes
The soundbar has 3 equalizer pre-sets, tailored to complement various styles of music

• Press the MUSIC button on the remote to choose Music EQ
• Press the MUSIC button on the remote to choose Movie EQ
• Press the NEWS button on the remote to choose NEWS EQ

3D Surround Sound
The soundbar also offers 3D EQ mode for an immersive surround sound. Press the 3D button on the remote controller to activate 3D EQ mode.

TECHNICAL SPECIFICATIONS

+Mid direction 2.25″/25W’2+rear satellite speaker 2.25″/25W’4+ 6.5″ wired subwoofer lOOW’l

Output Power| 350W R.M.S.
Frequency Response| 45Hz-20KHz
Signal-to-Noise Ratio| “70dB
Impedance| 40’10+40
BT Transmission Range| Up to 10m
B| uetooth| V5.0
Dimensions| Soundbar: 940’75’80mm Subwoofer: 240x240x370mm Satellite: 239’75’80mm

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>