boAt Airdopes 458 True Wireless Earbuds User Manual

boAt Airdopes 458 True Wireless Earbuds

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 458. Please consider this manual as your guiding map towards the shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual: also, you may refer to the same at times when you face any sort of difficulty in future.

Package Contains

• 1N Airdopes 458
• 2N Extra Earmuffs
• 1N Charging Case
• 1N Warranty Card
• 1N Catalogue
• 1N Read Me Card
• 1N FAQ Card
• 1N Type Cc Cable
• 1N User Manual
• 1N Fast Pair Card

Power On (First Time User)

Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Our IWP” Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected and enter into the connection mode.
OR
Long touch the CTC on both earbuds for 3 seconds to manually power on the earbuds Step 2: Both the earbuds automatically pair with each other. The earbuds enter into the Connection Mode, indicated rapid white LED flashes.

Connection Mode

Step 3: Turn on the Bluetooth functionality on your phone/media device and scan
Step 4: Search for Airdopes 458′ and pair accordingly
Congratulations! Your earbuds are connected successfully via Bluetooth

Note:

• Pairing Mode: It lasts for 5 minutes. IF the pairing time is missed then you will need to reconnect the earbuds and follow the above-mentioned procedure
• Subsequent Usage: Airdopes 458 remembers previously Connected devices; once Switched on. the earbuds automatically reconnect to the previously connected devices

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode. Use Smart/ Manual Power On for switching on the desired earbud
Step 2: The selected earbud automatically enters the connection mode indicated by rapid white LED flashes
Step 3: Turn on Bluetooth on your phone/media device and search for Airdopes 458 to connect
Note:

• To switch to Stereo mode, simply take out the other earbud From the case It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
• You cannot skip tracks or return to the previous tracks in Mono mode

LED Indicators/ Functionalities

• 3 Seconds Long touch left CTC for 3 sec to activate voice assistant
• 3 Seconds Long touch both CTCs for 3 seconds to manually power on, indicated by white LED flash for 1 second
• 5 Seconds Long touch both CTCs for 5 seconds to manually power off, indicated by white LED flash
• 10 Seconds Long press the Reset Button on the case for up to 10 seconds for the factory reset, indicated by white LED flashes on the case

CHARGING THE EARBUDS/ EARBUD INDICATORS

Step: Please insert the earbuds back inside the charging case in correct orientation and close the case lid. Once the earbuds are fully charged, the charging case automatically switches off to save power.

LED INDICATORS

Note:

• Before using the earbuds for the first time, t is recommended to fully charge the earbuds. Also, please keep the id of the charging case closed while charging
• If the earbuds have battery lower than 20% white LED blinks thrice every 30 seconds

Charging the Case

Step: To charge the case. plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ power bank, etc. While the case gets charged it gets indicated by slow breathing white LED. Whereas when it gets fully charged. the LED turns into solid white

Basic Functions

• Voice Assistant: Long touch the CTC On left earbud for 3 second to activate default voice assistant
• Answer Call Single tap the CTC on either earbud to answer an incoming call
• Hang Up Call: Double tap the CTC on either earbud
• Reject Call: Double tap the CTC on either earbud
• Play/Pause Music: Put on the earbuds to play a song.

whereas remove them from your ears to pause one. The In-Ear Detection feature triggers a seamless play or pause.
OR
Single tap on either earbud’s CTC to play or pause music

• Next Track: When playing music, double tap the right CTC to skip to the next song9
• Previous Track: When playing music, double tap the left CTC to return to the previousS song
• BEAST Mode: Long touch the right earbud’s CTC for 3 seconds to switch to Low Latency mode infused with Virtual 3D Sound, also known as the BEAST Mode
  Made for the Gamers By Gamers, BEAST”” Mode reduces the latency significantly and improves the overall gaming experience. With BEAST” mode, the earbuds activate 3D audio mode especially made for gaming.

To turn off the BEAST” mode and return to Standard mode, long touch the right earbud’s CTC for another 3 seconds

• ENx Tech: Our ENx tech algorithm cancels out the background noise so that you can be heard crystal cle via voice calls. One need not activate ENx as the mic is equipped with the same and activated by default. Deliver your voice without interruptions anywhere traffic, railway stations, airports, work space; literally anywhere

Note:

• Volume can only be controlled via the media device

Voice Assistant

Step 1: Long touch the CTC on  left earbud for 3 seconds to activate the smart voice assistant
Step 2: The respective voice assistant screen pops up and you may place your commands at ease
Tips: You may try out the following commands,
Note: If the voice assistant doesn’t get triggered then the functionality has to be first enabled vià your media device.

Smart Power Off

Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case in correct orientation and ciose the lid
Step 3: The earbuds will automatically switch off (and enter charging mode)

Manual Power Off

Step 1: Long touch both the CTCs on earbuds for 5 seconds
Step 2: Once the earbuds get turned off, place them back inside the case and close the lid

Factory Reset

Perform the Factory Reset in case you face any difficulty while operating your Airdopes 458

NOTE: Before performing reset clear Airdopes 458 from pairing device history by forgetting device
Step 1: Place the earbuds inside the case.
Step 2: While the earbuds are inside the case, long press the Reset button located outside the case for 10 seconds, until the white LED blinks on the case
Step 3: Close the case lid and then reopen it again.
Congratulations
Your Airdopes 458 has been Reset, now you may perform a fresh pairing procedure to establish connection.

Troubleshooting

Specifications

Warning

• Please follow the instructions to operate
• Please don’t use the earbuds in extreme temperatures
• Please dont use the product near water
• Please keep the product away from heat sources, as the heat may damago it
• Don’t jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life.

Advisable: The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switched on at first. This can be done by using the phone/ media
device

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>