OMNIVISION OV8865 High-Performance Low-Power 8-Megapixel Image Sensor Owner’s Manual
- June 9, 2024
- OMNIVISION
Table of Contents
OV8865
8 megapixel product brief
High-Performance, Low-Power 8-Megapixel
Image Sensor for Mainstream Smartphones and Tablets
Owner’s Manual
OV8865 High-Performance Low-Power 8-Megapixel Image Sensor
OMNIVISION’s OV8865 is a low-power high-performance 8-megapixel camera
solution for mainstream smartphones and tablets. Utilizing an improved
1.4-micron OmniBSITM-2 pixel, the OV8865 delivers best-in-class pixel
performance in a smaller, more power efficient package compared to the
previous generation OV8835 sensor.
The OV8865 offers a number of performance improvements including a five
percent improvement in dynamic range and a 50 percent reduction in dark
current, resulting in superior high- and low-light images. Furthermore, the
OV8865 consumes considerably less power than the OV8835, achieving the sub 200
mW benchmark preferred by high-end mobile device manufacturers.
The 1/3.2-inch OV8865 supports an active array of 3264 x 2448 (8-megapixels)
operating at 30 frames per second (fps) for high-speed photography. The sensor
is also capable of capturing 1080p high-definition (HD) video at 30 fps or
720p at 60 fps.
The OV8865 fits into an industry standard 8.5 x 8.5 x 5 mm package.
Find out more at www.ovt.com.
Ordering Information
- OV08865-G04A-1D (color, chip probing, 200 µm backgrounding, reconstructed wafer with good die)
Applications
- cellular phones
- tablets
- PC multimedia
Technical Specifications
-
active array size: 3264 x 2448
-
maximum image transfer rate:
– 8MP (3264 x 2448): 30 fps -
power supply:
– core: 1.2V
– analog: 2.8V – I/O: 1.8V, 1.2V -
power requirements:
– active: 196 mW (full resolution @ 30 fps)
– XSHUTDOWN: 5 µW -
output formats: 10-bit RAW RGB
-
temperature range:
– operating: -30°C to +85°C junction temperature
– stable: 0°C to +60°C junction temperature -
lens size: 1/3.2″
-
lens chief ray angle: 28.77° non-linear
-
scan mode: progressive
-
pixel size: 1.4 µm x 1.4 µm
-
image area: 4614.4 µm x 3472 µm
Product Features
-
automatic black level calibration (ABLC)
-
programmable controls for:
– frame rate
– mirror and flip
– cropping
– windowing -
static defective pixel canceling
-
supports output formats: 10-bit RAW RGB (MIPI)
-
supports images sizes:
– 3264 x 2448
– 3264 x 1836
– 2816 x 1584
– 1632 x 1224
– 1408 x 792 -
supports horizontal and vertical subsampling
-
supports 2×2 binning, re-sampling filter
-
standard serial SCCB interface
-
up to 4-lane MIPI serial output interface
-
embedded 1536 bytes one-time programmable (OTP) memory for part identification, etc.
-
two on-chip phase lock loops (PLLs)
-
programmable I/O drive capability
-
built-in temperature sensor
Functional Block Diagram
https://www.ovt.com/products/ov8865/
Version 1.4, March 2023
4275 Burton Drive
Santa Clara, CA 95054
USA| Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
---|---
OMNIVISION reserves the right to make changes to their products or to discontinue any product or service without further notice. OMNIVISION and the OMNIVISION logo are trademarks or registered trademarks of Omni Vision Technologies, Inc. Omni BSI is a trademarks of Omni Vision Technologies, Inc. All other trademarks are the property of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>