AVerMedia MIC 133 Live Streamer User Guide
- June 9, 2024
- AVerMedia
Table of Contents
Live Streamer MIC 133
Quick Guide
MIC 133 Live Streamer
Disclaimer
All pictures contained in this documentation are example images only. The
images may vary depending on the product and software version. Information
presented in this documentation has been carefully checked for reliability;
however, no responsibility is assumed for inaccuracies. The information
contained in this documentation is subject to change without notice.
Copyright and Trademark Information
© 2018 by AVerMedia Technologies, Inc. All rights reserved. No part of this
publication, in whole or in part, may be reproduced, transmitted, transcribed,
altered or translated into any language in any form by any means without the
written permission of AVerMedia Technologies, Inc. Information and
specification contained in this manual are subject to change without notice
and do not represent a commitment on the part of AVerMedia.
For more information, please visit
www.avermedia.com.
AVerMedia is trademark or registered trademark of AVerMedia Technologies, Inc.
Headquarters
Address No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan
Website www.avermedia.com
Support www.avermedia.com/support
Telephone +886-2-2226-3630
US Office
Address 47358 Fremont Blvd., Fremont, CA 94538, United States
Website www.avermedia-usa.com
Telephone +1 (510) 403 0006
Head Office EU (AVT Solutions GmbH)
Address Hanaper Landstrasse 291 B, 60314 Frankfurt Hessen, Germany
Website www.avermedia.com/inquiry
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Follow all instructions.
- Heed all warnings.
- Do not use the apparatus on uneven or unstable surfaces.
- Do not use this apparatus in a wet environment or near water.
- Unplug the apparatus before cleaning. Clean only with a dry cloth.
- Use in a well ventilated environment. Do not block any ventilation openings.
- Use the apparatus within ambient temperatures 32–104°F (0–40°C).
- Use power sources within the specified voltage range.
- Do not place heavy objects on the apparatus.
- Do not install near heat sources such as radiators or stoves.
- Do not defeat the safety purposes of the polarized or grounding-type plug.
- Protect the power cord from being walked on or pinched, particularly where the cord connects with plugs or adapters.
- Only use the attachments and accessories specified by the manufacturer.
- Unplug this apparatus during lightning or when unused for prolonged periods of time.
- Do not modify or disassemble the apparatus in any way.
- Refer all servicing to AVerMedia Customer Service.
- Do not dispose the apparatus as general household waste. Dispose in accordance with local environmental laws.
Inside the Box
These are what you’ll find in the box:
Parts and Ports
1 Microphone Grille
2 3.5 mm Jack| 3 Cable Clip
4 Camera Shoe Mount
---|---
Mounting to Camera
-
Insert the mic body into the shock mount.
-
Turn the tightening ring counter-clockwise to lossen the camera shoe mount.
-
Slide the camera shoe mount into place on the camera mount.
Once the mic is in place, turn the ring clockwise to tighten the shock mount. -
Plug one end of the 3-pole to 3-pole 3.5 mm cable into the mic.
-
Plug the other end to your camera’s MIC input jack and secure the cable by attaching it to the cable clip.
Note: For better audio quality, it’s highly recommended to use the included windscreen to reduce wind noise when recording outdoors or breath noise when recording human voice.
Using with Smartphone
You can connect the mic to a smartphone mounted on a tripod.
Note: When connecting to smartphones with a 3.5 mm headphone jack, use the
included 4-pole to 3-pole 3.5 mm audio adapter cable and plug the 4-pole end
into your smartphone. You can plug your headphones into the 3.5 mm jack for
audio playback.
The shock mount can be attached to the included metal stand.
Note: When connecting to smartphones without a 3.5 mm headphone jack, you’ll need either a Lightning to 3.5mm or USB-C to 3.5mm adapter for iPhone or Android phone respectively. Use the included 4-pole to 3-pole 3.5 mm audio adapter cable, plug the 3-pole end into the mic and the 4-pole end into the adapter (not included).
Using with Computer
Note: When connecting to a computer with a headphone/microphone combo jack, use the included 4-pole to 3-pole 3.5 mm audio adapter cable and plug the 4-pole end into the combo jack. If your computer has a dedicated MIC input jack, use the 3-pole to 3-pole 3.5 mm cable instead.
Specifications
| Impedance | 1.5 K Ω |
|---|---|
| Sensitivity | -37 dB ±3 dB at 1 kHz (0 dB = 1V/Pa) |
| Directivity | Unidirectional |
| Operation Voltage | Range: DC 1.1–10V |
| Frequency Response | 20 Hz – 16 KHz |
| S/N Ratio | 60 dB |
| Max. Input Sound Pressure | 110 dB |
| Weight | 30 g |
Federal Communications Commission Statement Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE – This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
tuning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
CAUTION ON MODIFICATIONS – To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed in computer equipment certified to comply with the Class B limits. All cables used to connect the computer and peripherals must be shielded and grounded. Operation with non-certified computers or non-shielded cables may result in interference to radio or television reception. Changes and modifications not expressly approved by the manufacturer or registrant of the equipment can void your authority to operate the equipment under Federal Communications Commission rules.
European Community Compliance Statement Class B
This product is herewith confirmed to comply with the requirements set out in
the Council Directives on the approximation of the laws of the Member States
relating to Electromagnetic Compatibility Directive (EMC) 2014/30/EU.
Waste Electrical and Electronic Equipment Directive
The mark of crossed-out wheeled bin indicates that this product must not be
disposed of with your other household waste. Instead, you need to dispose of
the waste equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment. For more
information about where to drop off your waste equipment for recycling, please
contact your household waste disposal service or the shop where you purchased
the product.
CAN ICES-3(B)/NMB-3(B)
Canada – Canada Industry Canada (IC) Labelling Requirements
Every manufacturer or importer shall ensure import or before offering for
sale, as appropriate, that each unit of the type that they offer for sale
bears, in alocation convenient for inspection, a permanent label or marking
containing (in French and English), the following statement:
ICES-003 (Interference – Causing Equipment Standards) “This class B digital
apparatus complies with Canadian ICES-003.
Technical Regulations of the Customs Union
TR CU 020/2011
MSIP Class B Statement (Korea)
Class B (For Home Use Broadcasting & Communication Equipment): This
equipment is home use (Class B) electromagnetic wave suitability equipment and
tobe used mainly at home and it can be used in all areas.
Regulatory Compliance Mark
BSMI Registration of Product Certification (Taiwan)http://www.avermedia.com/tw/about_us/social
Model No.: AM133
Live Streamer MIC 133
Microphone
Made in China
References
- AVerMedia | Create and Connect
- AVerMedia | Create and Connect
- Support | Download And Faq | AVerMedia
- Responsibility | AVerMedia
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>