Godox GMC-F3 Monitor Camera Control Cable Instruction Manual

Godox GMC-F3 Monitor Camera Control Cable Instruction Manual

Foreword

Thank you for purchasing!
This monitor camera control cable is a plug and play accessory cable for Godox ultra bright camera monitor series and Fuji cameras. With this cable, the monitor can realize the certain functions of camera control. Read this manual carefully before using to make sure the correct operation and exert the optimum function.

Main Features

• TPE fixed wire connector, ensuring long using life span;
• Adopt sandblasting process, anti-rust and corrosion resistance;
• Multiple-layer protected, scratch-proof and antioxidant;
• Consummate craft, solid and durable;
• Rigorous testing and security control.

Warning

Don’t disassemble!
Always keep this product dry!
Do not leave or store the product if the ambient temperature reads over 50°C.
Do not leave the product in the presence of flammable gas. In certain circumstance, please pay attention to the relevant warning.
Please carefully read and observe the warning or direction offered by the manufacture.
Changes made to the specifications or designs may not be reflected in this manual.

Product Structure

Connection Guidance

Insert the 2.5mm four-stage plug of the monitor camera control cable into the interface of monitor, and the other 2.5mm three-stage end into compatible Fuji cameras.

Camera Control Operation Instruction

1. Connect the monitor and camera with HDMI cable and monitor camera control cable respectively.
2. Turn on the remote control setting on the camera (some models no need to set), and camera control setting on the monitor.
3. Slide leftwards from the screen edge to bring out the camera control menu. The background color of the menu will lighten on if successfully connected, otherwise, it will be gray. Single-click the video area to hide the camera control menu.
4. Click the following function buttons to use: shooting, recording and auto focus.

Notes:

1. This camera control cable can only control shooting, recording and auto focus functions of certain Fuji cameras.
2. This camera control cable supports dual control: recording is controllable when shooting, and shooting is also controllable when recording.

Camera Control Function Introduction of GM6S/GM7S

Camera control menu:

Shooting: Click to control the camera to shoot. .
Recording: Recording: Click to control the camera to record.
Auto focus: Click to control the camera to automatically focus.
Focusing: Click to enter the focal length adjustment secondary menu to increase or decrease the focal length manually.
**ISO: Display the current photosensibility, click to enter the photosensibility adjustment secondary menu to increase or decrease the photosensibility manually.
Aperture: Display the current aperture, click to enter the aperture adjustment secondary menu to increase or decrease the aperture manually.
Shutter:** Display the current shutter speed, click to enter the shutter speed adjustment secondary menu to increase or decrease the shutter speed manually.

Compatible Camera Models

# Due to the design of the camera, the camera control cable and HDMI cable can’t be inserted into the camera jack port at the same time, a conversion cable is suggested.

***** Real time output is unavailable when connected to external HDMI monitor, but functions of control control cable are available.

Tip: The compatibility list may continue to be updated without notice, please check the latest compatibility list on our official website, a conversion cable is suggested.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU.They are allowed to be used in all EU member states.
For more information of DoC, Please click this web link: https://www.godox.com/DOC/Godox_GMC-F3_DOC.pdf

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safekeep it.
Thank you!

Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:

Note: This from shall be sealed by the seller.

Applicable Products
The document applies to the products listed on the Product Mainte-nance information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day (purchase date) when the product is bought for the first time, and the purchase date is consid-ered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card.
If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases:(1) . The product or accessory has expired its warranty period; (2). Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environ- ments, etc; (3). Breakage or damage caused by non- authorized institution or staff in the process of installation, maintenance, alterna- tion, addition and detachment; (4). The original identifying information of product or accessory is modified, alternated, or removed; (5). No valid warranty card; (6). Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;(7). Breakage or damage caused by force majeure or accident; (8). Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Without warranty

Godox After-sale Service Call 0755-29609320-8062

GODOX Photo Equipment Co., Ltd.
Add , : Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an
District, Shenzhen 518103, China
Tel : +86-755-29609320(8062)
Fax : +86-755-25723423
E-mail : godox@godox.com

www.godox.com
Made in China
705-GMCF30-00 CP C E Fc

Wechat Official Account

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>