TAP ACTC Active Cable Instrument Instructions
- June 9, 2024
- TAP
Table of Contents
ACTC Active Cable Instrument
Instructions
ACTC Active Cable Instrument
- Low Impedance
- Braided Shield
- High Quality
Description
The Active Cable matched with any passive pickups, magnetic or piezo pickups
of most types. Performs with little to no crossover distortion and provides
exceptional frequency reproduction. Suitable for guitar. mandolin. bouzouki,
or any other instrument with a passive magnetic or piezo pickup.
Provides
The XLR Adapter includes a preamplifier circuit with 9 dB gain that allows a
low-impedance line out to be used as a high quality audio source for
reproduction and recording. The preamp buffer is built in an extended XLR
connector. The preamp is powered by the phantom power (8 to 48V) so requires
no batteries to go flat at inconvenient moments.
Specs
1/4 plug jack to standard 3-pin male XLR output in available cable length 4m.
Gain + 9 dB nominal with Flat Response.
Consumption current load 350 uA by phantom power (a to 48v).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>