TAP BCE-27 Bass Cello Pickup Installation Guide
- June 9, 2024
- TAP
Table of Contents
BCE-27 Bass Cello Pickup
Installation Guide
Technical Information:
Sensor Height: 3 mm
Sensor diameter: 28 mm
Impedance: High ohmic
FEATURES – INSTRUCTION
Ultra-sensitive (transducer) pickup, suitable for Cello and Contrabass.
The selection materials (elastic & wood), render the BCE-27 with very good
surface the also maintains its strength and flexibility. The result is a
sensor that is ultra-sensitive to an instruments surface vibrations and,
therefore, has extremely natural and warm sounding. This pickup is designed
for full response regardless of whether you play arco (bowed) or pizzicato
(plucked). Set your amp’s tone to suit your taste. However, the best frequency
response will be obtained by using a buffering preamp with a high output
impedance. You can install the sensor to any place along the organ’s body
according to your personal preference of sound, hue and volume. Comes with an
¼ jack for external mounting and adhesive jack holder.
- The model BCE-27M comes with Endpin jack and socket holder, for mounting between the strings above the tailpiece.
Installation
Before installing the BCE-27, must cleaning the instrument surface. After that, easy mount the sensor with the double adhesive tape. For removing the sensor, keep firmly with fingers around the diameter and pull out carefully – slowly. For reinstallation, a spare part of double adhesive tape included.