deante X34 M Concealed Bidet Mixer with Handset Instruction Manual

deante X34 M Concealed Bidet Mixer with Handset

INSTALLATION

•  Before making any inlet pipe connections, all supply pi-pes must be throughly flushed to remove debris. Failing to do this may cause damage of the cartridge or low water flow.

• The place and way of installation needs to ensure free access to any possible dismantling and a possibility of carrying out maintenance or repair activities.

•  The mixer should be installed by a persons with appropriate qualifications. For a built-in product, the Purchaser should check its proper operation before installation in the presence of the person supervising the operation of the product. Any possible damage caused as a result of unprofessional assembly or maintenance is not covered by warranty.

•  Mounting valves on any type of extensions / reducers is not recommended. Mixer installation should be carried out using all original components included in the product and supplied by the producer.

• To purchase parts, contact producer via [email protected]

• In line with a possibility of contamination of the water which may cause product damages it’s necessary to use angle, check valves with filters in the connection between mixer hoses to the installation, or sealing screen for wall mounted mixers and showers.

•  Flexible hoses must not be bent or twisted. Hoses may only be screwed into the fitting by hand.

• Mixers are intended for indoor installation. Do not allow the mixer or water inside to freeze.

•  It is recommended to turn off the main water valve during long absence.

• Do not leave the product unattended during a pressure test.

•  It is not advisable to use a thermostatic tap with flow gas and electric water heaters.

•  The Warrantor reserves the right to make production changes and corrections of the product arising from technological progress and aesthetic values without prior
  notice.

•  The manufacturer declares that the colour (shade) of a product from the same line may be slightly different and is in a similar shade. The difference in shade is not a defect of the product and may result from the normal production process.

Requirements for taps other than thermostatic taps:

Requirements for thermostatic taps:

MAINTENANCE

A user is obliged to clean the following on a regular basis: aerator, ball valves with a filter, tap’s surface, to check con-nections of hoses, filters.
Recommendation:

•  Use a soft cloth
• Do not use chlorine or alcohol based cleaner, strong acids, bases or solvents
• Do not use cleaner with cleaning beads
•  Use biodegradable cleaning agents with a delicate structure based on fruit acids, ie recommended Deante agents.
• Mixer should be at the room temperature during cleaning
• After cleaning, rinse the washed surface thoroughly to get rid off residual chemicals and wipe dry.
• Do not use high pressure or steam cleaners

Details of the warranty on www.deante.eu

MIXER MODELS
I – Standing model with a pull-apart spout II – Wall modelIII – Standing modelIV, V, VI – Flush-mounted model

VII, VIII – Standing multi-hole model
Use PTFE tape

After usage turn off the faucet

Documents / Resources

| deante X34 M Concealed Bidet Mixer with Handset [pdf] Instruction Manual
X34 M Concealed Bidet Mixer with Handset, X34 M, Concealed Bidet Mixer with Handset, Mixer with Handset
---|---

References

• Producent wyposażenia kuchni i łazienki. Oficjalna strona - Deante
• Producent wyposażenia kuchni i łazienki. Oficjalna strona - Deante
• Producent wyposażenia kuchni i łazienki. Oficjalna strona - Deante

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>