compx 2.4G Wireless Mouse Instructions

: June 9, 2024
: compx

Table of Contents

Product Overview
Operating instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2.4G mouse instructions
wireless mouse v7.0

Product Overview

Compatible with USB1 1/2.0 specification, certified by USB-IF and WHQL test
16-channel automatic frequency hopping, strong anti-jamming ability
Excellent RF characteristics ensure long-distance/directionless
Full speed USB, 2 modes, game mode (250Hz)/office mode (125Hz), online switching of 250/125Hz
Two code checking methods are supported (hardware code checking and PC software code checking)
Support sensor type
Original phase series: 3212/3205/3065/3204UL/V108//8640 Built-in sensor optimization algorithm ensures smoothness and smoothness
Six function keys: left key, middle key, right key, forward key, backward key, DPI key
Support combo
Package specification: sop16

Operating instructions

Code checking
Two methods, hardware code matching+PC software code matching
A. Hardware code checking:

After powering on, press the left+middle+right three keys for 1 second at the same time, and the mouse will enter the 20-second code checking mode, and the LED will be on for a long time
Insert the receiver within 20 seconds, the LED is off, and the code is matched successfully

If the code checking fails in more than 20 seconds or 20 seconds, the mouse will exit the code checking mode and the LED will be off. B. PC software code checking:

Open the code checking software, insert USB into the receiver, and automatically enter the code checking mode
Briefly press the left+middle+right three keys in 20 seconds, the LED will stay on, and the mouse will enter the code matching mode. If the code matching is successful, the software will prompt the code matching is successful If the code is not successfully matched within 20 seconds, the software will prompt the code failed, the LED will be off, and the mouse will exit the code

DPI switching
DPI key switch+composite key switch – 2 modes

Press the DPI switch key, and the DPI will cycle between high/medium/low gears
Press and hold the left key+middle key for 3 seconds, and the DPI will cycle between high/middle/low gears
*The DPI is saved in the E2PROM and powered on again. The DPI is also the last set DPI value
DPI
Sensor| low DPI| in DPI| high DPI
---|---|---|---
3212| 1000| 1600| 2400
3205| 800| 1200| 1600 default
3065| 800| 1200| 1600 default
V108| 800| 1200| 1600 default

Multi-level intelligent power saving

Stop for 1 minute, enter the secondary sleep mode, and the current is less than 0.15mA
Stop for 1 minute, enter the secondary sleep mode, and the current is less than 0.15mA
After 15 minutes of shutdown, enter the three-level sleep mode, the sensor LED is off, and the current is less than 30uA

In the first/second sleep mode, the mouse can be moved to wake up
After the sensor LED is turned off, you need to press the key or scroll wheel to wake up the mouse
Unplug the receiver or turn off the PC, the sensor LED will automatically turn off in this state, and press the key to wake up the mouse,
If the key/scroll wheel wakes up, the first key is the wake-up function, not the function key Power consumption of the whole machine (3V, white face, red light, LED limit resistance 82R, Report rate=250Hz)

Sensor| Working current| Level 1 sleep| Level 3 sleep (turn off the light)
---|---|---|---
3212| 4.5mA| < 0.3mA| < 30uA
3205| 6mA| < 0.3mA| < 30uA
3065| 7mA| < 0.3mA| < 30uA
V108| 8mA| < 0.4mA| < 30uA

** Report Rate = 125Hz，The working current will be small 1‐ 1.5mA
RF product technical specification table

Product Name : 2.4G Wireless Mouse
Rated Voltage and Current： DC 3V , 5mA
Frequency Band : 2403.65MHz 2479.65 MHz
Number of Channel: 16
L.O.: 2601.6Mhz
Channel Spacing: ≥6MHz
RF Output Power (ERP OR EIRP) : 0dBm
Modulation Type : GFSK
Duty Cycle : <10%
Mode of operation (duplex , simplex): duplex
Bit Rate of Transmission : 2Mbps
Antenna Type: PCB Antenna
Antenna gain: -1~-2dBi
Operating Temperature Range: -20C ~ 55C
Channel Bandwidth : 2.5MHz
Channel list:

Channel	1	2	3	4	5-Jan-00	6	7	8
(MHz)	2403.65	2426.65	2441.65	2463.65	2407.65	2422.65	2445.65

2466.65
Channel| 9| 10| 11| 12| 13| 14| 15| 16
(MHz)| 2414.65| 2436.65| 2459.65| 2473.65| 2419.65| 2439.65| 2453.65| 2479.65

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.