CARLIMEKI ZA001-CP Wireless Carplay Adapter User Manual
- June 9, 2024
- CARLIMEKI
Table of Contents
CARLIMEKI ZA001-CP Wireless Carplay Adapter
Product Introduction & Parameters
With this CARLIMEKI wireless Carp lay adapter you are going to have a simpler, safer way to use your phone in the car. Super convenient connects to Carp lay on your car display. You can easily control the various functions with this Carp lay dongle like accessing Siri, getting navigation, playback music volume control, skipping a track, volume control, and much more.
Power Input: SV: 1A Power Output: SV:1A
Power Consumption: 0.85W Resolution: Adaptive
Packages Includes:
Method of Application
-
Plug this adapter into your car’s existing Carp lay enabled USB port.
-
Turn on WLAN & BLUETOOTH. Go to your phone’s Bluetooth settings and click on “Smart Box- xxxx “.Allow pairing, syncing, and Carp lay use.
-
Wait for a few seconds (20s-50s) then your wireless connection is ready to use.
Online Upgrade
-
Plug this wireless dongle to a USB power adapter. (Noted: Don’t plug in the USB port which with data transmission or it may fail to upgrade.)
-
Turn on your iPhone’s WLAN and connect the WiFi named “SmartBox-xxxx” (Password: 88888888). Enter IP address 192.168.1.101 in Safari. Click “Update” then wait for the update to complete (around 2-3 min).
-
Check the status of LED light. when the Led light is flashing means it’s updating. When the Led light is always on means update was completed, After that please reboot the adapter by unplugging it and plugging it back in.
NOTED: If your wireless Carp lay adapter works out of the Box.
DO NOT UPGRADE
Frequently Asked Questions & Technical Support
Q1: Will it work for my car or phone?
A 1: this is CARPLAY adapter so only work for I PHONE (IOS 7.1 above
required). And your car has to come with factory wired Carp lay.
Q2: Does it reconnect automatically?
A2: Yes once paired, every time you get back into the car the Carp lay
adapter automatically connects and allows you to use Carp lay wirelessly.
Q3: How fast does it take to connect?
A3: It depends on your phone and cars. Initial connection usually takes
30-50 seconds only. More frequent use will be faster.
Q4: Does it complicated to set up? Do I need to download any APP?
M: NO. Totally plug and play. All you have to do is connect the Carp lay
adapter to the car’s USB port and pair your phone to “SmartBox-xxxx”. Allow
Pairing, Syncing and Carp lay use on the phone.
Q5: When this adapter does not work properly, how to use several advanced
settings and how to upload the log data ?
A5: Connect the WiFi named “SmartBox-xxxx” of this adapter (Password:
88888888). Enter IP address 192.168.1.101 in Safari. You could switch Unit
Type mode or Audio streaming mode. Also fill your car’s information and
problem of this adapter. Then click Submit to upload the log data to us.
Q6: What should I do if the adapter still does not work on my car after
following the instructions?
A6: Please try contacting us directly. There are a couple options on the
Admin Panel that can be changed to make it work on your Car!
Carlimeki Technical Support
|
---|---|---
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide re dereference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which car be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the
party responsible for comp Liance could void the user’s authority to operate
the equipment.
IC STATEMENT
This device complies with Industry Canada’ s license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>