Perma Child Safety 3101 Banister Adapter Kit Instruction Manual
- June 9, 2024
- PERMA CHILD SAFETY
Table of Contents
3101 Banister Adapter Kit
Instruction Manual
3101 Banister Adapter Kit
PART LIST:
Assembly
- Align 2x Timber Banister Adapter pieces
- Fix together using 4x 20mm Screws (3/4″)
AFTER SALES SUPPORT
Scan the QR code for Live Chat Support or visit: permachildsafety.com
/contact-us
Placement / Trim to Fit
A. Measure the opening and confirm that the gate will fit the opening width.
B. Check the height of your gate against the full height of the Banister
Adapter. Then measure the height of your banister, if the Banister Adapter is
taller than the gate and the banister it can be shortened by cutting the
excess timber.
Banister Adapter Installation
The Banister Adapter Kit must be installed in a structurally sound opening and
only be fixed to a solid and secure surface.
If unsure, check with a qualified builder that the installation you intend is
suitable and safe within the chosen location.
Place adapter vertically against banister
A. Insert zip tie in the bottom hole and loop around banister.
B. To protect banister add double sided foam tape then tighten.
A. Insert zip tie in the top hole and loop around banister.
B. To protect banister add double sided foam tape then tighten. 
Round top banisters will require extra foam packing to ensure the adapter is vertical with the lowest mount. 
Add the middle zip ties into the middle holes using the same process.
Trim the zip ties with a knife, be careful not to leave sharp edges.
Follow instruction provided with gate to mount into the Timber Adapter Kit.
Use a screwdriver and the 20mm (3/4″) screws provided. 
FOR OTHER INSTALLATION OPTIONS
Scan the QR code or visit the product page on
permachildsafety.com
References
- Perma Child Safety - Next Generation Safety
- Contact Our Customer Support Staff Team – Perma Child Safety
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>