Mircom FX-2001-6K One Analog Loop Fire Alarm Kit Instruction Manual
- June 9, 2024
- Mircom
Table of Contents
FX-2001-6K and FX-2001-6KU
One Analog Loop Fire Alarm Kit
FX-2001-6K One Analog Loop Fire Alarm Kit
THIS DOCUMENT, LT-915, ONLY DESCRIBES MECHANICAL INSTALLATION.
FOR ALL OTHER INFORMATION, REFER TO LT-657 FX-2000 INSTALLATION AND
OPERATIONAL MANUAL.
SPECIFICALLY, FOR ANY INFORMATION RELATED TO WIRING REFER TO “TABLE OF
CONTENTS” ON LT-657 MANUAL FOR FIELD WIRING.
The Model FX-2001-6K is a one addressable loop fire alarm kit which includes a
beige BBX-1024 Enclosure and a main chassis with main fire alarm board which
provides one addressable loop. The Model FX-2001-6KU is the same kit as the
Model FX-2001-6K except this kit has a red enclosure BBX-1024R. Both models
have 6A power supplies. Mechanical Installation: Mount the BBX-1024/R
enclosure as shown below in Figure 1.
Figure 1: BBX-1024 Backbox Enclosure
LEAVE BOTTOM OF BOX CONDUIT FREE FOR BATTERIES
The chassis setup for each kit is shown in Figure 2 below.
WIRING:
- For main fire alarm board addressable loop wiring see the LT-657 FX-2000 Installation Manual.
LT- 915 Rev. 1 Mar 2011
firealarmresources.com
Documents / Resources
|
Mircom FX-2001-6K One Analog Loop Fire Alarm
Kit
[pdf] Instruction Manual
FX-2001-6K One Analog Loop Fire Alarm Kit, FX-2001-6K, One Analog Loop Fire
Alarm Kit, Analog Loop Fire Alarm Kit, Loop Fire Alarm Kit, Alarm Kit, Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>