SVEN E-215B Wireless Stereo Headphones User Manual

SVEN E-215B Wireless Stereo Headphones

Thank you for purchasing MC SVEN Stereo Headphones!

COPYRIGHT
© 2018. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and the information it contains are protected by copyright. All rights are reserved.

BUYER RECOMMENDATIONS

• Transport and transport equipment is allowed only in the original packaging.
• It does not require special conditions for realization.
• It will be disposed of in accordance with the regulations on the disposal of household and computer equipment.

Recommendation

The SVEN E-215B stereo headset with microphone is designed to work with PC sound cards and other compatible systems. They can also be used for Internet telephony, video conferencing, multimedia applications, multiplayer online games, voice recognition and language learning.

THE COMPLETE SET

• Stereo headphones – 1 pc.
• USB power cable to micro USB – 1 pc.
• A set of additional interchangeable ears – 2 pcs.
• User manual – 1 pc.
• Warranty card – 1 pc.

SAFETY MEASURES

• Do not use stereo headphones while driving a car.
• Do not use stereo headphones at high volume for a long time (more than a quarter of an hour) – this causes hearing loss.

PARTICULARS

• Special design for use during exercise or other physical activities
• Removable cervical edge
• Wireless signal transmission via Bluetooth 4.1
• The ability to manage incoming calls while using a mobile phone
• Control songs and volume levels while listening to music
• Two additional sets of replaceable ear pads
• Battery operation time – up to 5 hours
• Operating range – up to 10 meters

DESCRIPTION

1. LED indicator

2. Volume down button (short press); previous track (long press, ~2 sec)

3. Button for connecting/disconnecting headphones; For handling calls;
   Рlay/Рause

4. Micro USB plug for charging

5. Button for increasing the volume level (short press); next track (long press, ~2 sec)

CONNECTION AND USE

Careful! Before starting use, it is necessary to fully charge the built-in battery.

Loading the gasket

• Connect the headset to the USB input of the PC or the USB charging device using the USB to micro USB cable (from the complete set). During charging the indicator a will glow red.
• When the unit is fully charged, the indicator will turn off.
• When the battery level is low, a short beep sounds and the LED flashes red.
• The headset uses the battery as an integrated part of the device, so do not try to change it, this may void the warranty or damage the device.

Connecting and disconnecting the device

To connect the headset, press and hold the c button until it appears the audio signal. When activated, LED a will alternate between blue and red (device search mode) or flashing blue (when connected to device). To disconnect the headset, repeatedly press and hold the c button until the audio signal appears. When disconnecting, the LED indicator will start to flashes red light.

Control buttons

In combination with the phone:

• to receive the incoming call, press the c button. To end the conversation press repeated button c;
• to reset the incoming call, press and hold the c button (~2 sec.)*;
• when pressing the c key twice, the last number redial function will be connected called*;
• when the c button is pressed for a long time, the headset is disconnected from the device and enters search mode

Depending on your phone/smartphone configuration.

Bluetooth technology

Wireless data transmission via Bluetooth port enables wireless connection of headphones to compatible devices. The maximum operating radius of the operation of data transmission is 10 meters. Obstacles such as walls and others electronic devices may prevent data transmission.

Associating the gasket with the devices

• To transmit the signal via Bluetooth it is necessary to perform in advance the connection between the device and the signal source (see the connection diagram in image 2).
• To do this, turn on the headset, wait for the search mode – the LED indicator a will alternate between blue and red.
• At the signal source (telephone, notebook, smartphone, etc.) it is necessary to select Bluetooth device search mode. The name «SVEN E-215B», with which you need to establish the connection.
• In the case of connection, a short beep will be heard in the headphones, which indicatestermination of the seal search regime. If no device is connected,the headphones will automatically turn off after 2 minutes. If you failed to make the pairing devices, it is necessary to repeatedly put the system into search mode (disconnect and connect)**.
• During data exchange (listening to music) with the connected Bluetooth device, the headset indicator flashes blue.

For Bluetooth connection with some device models, you may need to enter the code «0000».
If the product already exists in the source device list, then the repeated activation a the search regime is not mandatory. Just choose the product name «SVEN E-215B» and the “connect” command to the source.

SPECIFICATIONS

• Parameters, units of measurement Value
• Sensitivity, headphone dB: 110 ± 3 microphone: -58 ± 3
• Frequency range, Hz headphones: 20 – 20 000 microphone: 30 – 16 000
• Impedance, Ohm 16
• Diaphragm, mm Ø 10
• Bluetooth 4.1 connection type
• Supported Bluetooth profiles HSP, HFP, A2DP, AVRCP
• Operating range, m to 10
• Operating time, hours up to 5
• Cable length, m 0.8
• Weight, g 43

Notes:

• The technical characteristics listed in the table are certified and cannot be the cause complaints.
• The production of the SVEN trademark is continuously improved. From that specifications may be changed without prior notice

Model : E-215B
Importers of MC SVEN in the Republic of Moldova:
The official representative of MC SVEN in Moldova: SRL «ULTRA», Chisinau, Creangă str., 6V, Republic of Moldova, phone: +373 22 870230,
e-mail : [email protected]
IM «Accent Electronic» SA, Chisinau, Bulgara str., 33/1, Republic of Moldova,
phone : +373 22 234569
e-mail : [email protected]
Manufacturer : SVEN PTE. LTD, 176 Joo Chiat Road, № 02-02, Singapore, 427447, Product under control «SVEN Scandinavia Limited», 48310, Finland, Kotka, Kotolahdentie, 15.
Manufacturer : SVEN PTE. LTD, 176 Joo Chiat Road, № 02-02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, 48310.
Made in China.
® Registered Trademark of Oy SVEN Scandinavia Ltd. Finland.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>