Artemide Chilone Outdoor Wall Light Installation Guide

June 9, 2024
Artemide

Artemide logo

Artemide Chilone Outdoor Wall Light

Prior to any work on the fixture always switch off the mains.ARTEMIDE S.p.a. does not shoulder any responsibilities for products which are modified without prior authorisation. The light fitting requires a concrete base-plate A with draining well (fig.1). Do not position the base-plate where water may stagnate. Cast concrete in the position selected and take care to leave the passage for routing the corrugated sheath B through the centre.

ASSEMBLY INSTRUCTIONS FLOOR 45-90-UP

Loosen the 4 screws C. Remove column D from light fitting mounting E (fig.2). Using mounting E as a template, mark positions for holes F (fig.3).

Artemide Chilone Outdoor Wall Light 1

Use heavy-duty screw anchors (fi g. 4). Carry out the wiring according to the polarity white / white, black / black and green / green creating a water- resistant connection. Fit the connection inside the draining well made earlier. Put column D back into place. Screw in the 4 screws C (fi g.5).

Artemide Chilone Outdoor Wall Light 2

ASSEMBLY INSTRUCTION WALL

Remove the 2 screws G with the washer and take out the fi xture body H (fi g.6). Drill according to the desired orientation (fi g.7). Use the bracket I as template. For the fi xing, use dowels for heavy duty anchors. Unscrew the closing cover L from the bracket I. Apply silicone on the jbox edge and fasten the bracket I to the wall. Connect the black cable of the jbox to the black cable of the fi xture body, the white cable of the jbox to the white cable of the fi xture body and the green cable of the fi xture and the green cable of the bracket to the green cable of the jbox. Fix the cover L to the bracket (fi g.8).

Artemide Chilone Outdoor Wall Light 3

Put light fi tting body H back into place paying attention to correctly place cable inside of it. Screw the 2 screws G with washer (fi g.9).

LED REPLACEMENT

The fixture is provided with a light source having a long life. Anyway, if the led needs to be replaced, this operation must be carried out only by our specialized staff. Therefore, we recommend contacting the nearest dealer. For the addresses of Artemide dealers in the world, visit our website: www.artemide.com

Via Bergamo, 18 -20010 Pregnana M.se (MI) – IIALIA t+39 02935.18.1 f+3902.935.90254-496 info@artemide.com www.artemide.com P. Iva IT 00846890150

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals