Artemide Melampo Mega Floor Lamp Installation Guide
- June 9, 2024
- Artemide
Table of Contents
Artemide Melampo Mega Floor Lamp Installation
Instructions
NOTE Prior to any work on the fixture always switch off the mains. Only use bulbs of the type and wattage indicated on the rating plate. ARTEMIDE S.p.a. ARTEMIDE S.p.a. ARTEMIDE S.p.a. not shoulder any responsibilities should products be modified without prior authorisation.
- Complete the diffuser fixing by using the 4 screws E supplied (Fig.5). E Screw the bulbs.
- Insert the plug in the outlet. Act on the dimmer cursor F located on the supply cable F G to switch on / off and to adjust the apparatus light G intensity (Fig. 6)
DIFFUSER POSITIONING
Act on handle H to position the diffuser in the three positions shown.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature.
General warnings for General warnings for indoor/outdoor light indoor/outdoor light fittings
The symbol indicates the suitability of fixtures to be mounted directly on normally inflammable surfaces. Fixtures without the above symbol are only suitable for installatio on non-flammable surfaces