Artemide Nesso Table Lamp Instruction Manual
- June 9, 2024
- Artemide
Table of Contents
Artemide Nesso Table Lamp Instruction Manual
Note:
Prior to any work on the fixture always switch off the mains.
Attention:
Employer exsclusivement les ampoules du type et de la puissance indiquée sur
la plaque de l’appareil.
Assembly instructions.
Screw the bulbs. Act on the switch placed on the feeding cable to turn on
and off the equipment.
Bulbs:
4 x Max 25W IBP/W E14 opaline
Bulbs for USA:
4 x Max 25W E12 G16 1/2
General warnings for indoor light fittings
The symbol indicates the suitabily of fixtures to be mounted directly on normaly inflammable surfaces. Fixtures without the above symbol are only suitable for installation on non- -inflammable surfaces.
All ARTEMIDE products falling within the range of application of the European low voltage directive B.T. 73/23 and subsequent amendment 93/68, meet the required specifications and bear “ ” labelling.
Artemide reserves the right to introduce all the technical and structural changes required for the improvement of the product.
Attention: This equipment is guaranteed only when used as indicated in these instructions. Therefore they should be kept for future reference.
In case of complaint, please quote number
via Bergamo, 18- -20010 Pregnana Milanese (Milano)- -ITALIA tel:93.51.81- -(a
ricerca automatica) telefax 02/93.59.02.54- -93.59.04.96
sito internet http://www.ARTEMIDE.COM codice fiscale e partita I.V.A.
00846890150
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>