Artemide Miconos Semi Flush Mount Ceiling Light Installation Guide
- June 9, 2024
- Artemide
Table of Contents
MICONOS
SUSPENSION CEILING
Design: Ernesto Gismondi
Installation Guide
Miconos Semi Flush Mount Ceiling Light
CANADA — USA
Note:
Prior to any work on the fixture always switch off the mains.
Attention:
Only use bulbs of the type and wattage indicated on the rating plate.
Assembly instructions.
Separate the bottom plate A from the ceiling rose B by means of a screwdriver.
Make electrical connections by connecting the white wire from the fixture to
the white wire from the wall box and the fixture black wire to the black wire.
Also connect the green wire to the system ground conductor. Fix the bottom
plate A to the ceiling through the loops E. Remount the ceiling rose B on the
bottom plate A with a light pressure. WARNING: to correctly hook the ceiling
rose to the bottom plate and without interfering with the rod C,thefairleadZ
should be near the metal tongue R placed on the metal bottom plate A. During
this action, pull the feeding cable towards the outside of the ceiling rose.
Only for the suspended model: To change the lamp height, operate on the four
dowels F by means of the supplied Allen wrench and making the rod G with the
blocks Q slide up to the desired height.
For all models: Hook the diffusor M to the hook of the rod G. Release the
locking ring H and put it on the feeding cable together with the plate L.
Tighten the bulb on the lamp hold-er. Insert the lamp holder unit O inside the
diffusion sphere M,asdetailedinfigure3.Now, keep the lamp holder unit O
against the inside of the diffusion sphere M pulling it by the electrical
cable. Bring the plate L against the sphere and retighten the locking ring
H.Adjust the feeding cable making it slide through the rubber rings
R,asdetailedinfigure1.Hook the security cable T to the hook of the rood G
(fig. 4).
Bulb:
Max 150W TYPE G E26 G40 127 mm
ARTEMIDE spa not shoulder any responsibilities should products be
modified without prior authorisation.
Attention: This equipment is guaranteed only when used as indicated in
these instructions. Therefore they should be kept for future reference.
In case of complaint, please quote number
mod. A cod. Y503000393
via Bergamo, 18- -20010 Pregnana Milanese (Milano)- -ITALIA
tel:93.51.81- -(a ricerca automatica)
telefax 02/93.59.02.54- -93.59.04.96
sito internet http://www.ARTEMIDE.COM
codice fiscale e partita I.V.A. 00846890150