Godox M200D Knowled Daylight LED Light Instruction Manual

Godox M200D Knowled Daylight LED Light

Safety Instructions and Attentions

First of all, as the most basic principle: This product is a professional lighting set of equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:

1. Before use, please read and understand these instructions and attention.

2. Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from a personal injury due to collision with lamps or private use of lamps.

3. This lighting product is not an ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product

4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.

5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.

6. lf the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.

7. This product is only suitable for use in -10 C to 40 C operating environments and a normal humidity environments.

8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use.

9. During use, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.

10. lf an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result

11. Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, and avoid improper placement that could cause pulling damage, or trip on-site personnel.  Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory.

12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet This equipment needs to be connected to a grounded outlet

13. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents.

14. Do not disassemble the product without permission. If the product fails, it must be
    checked and repaired by authorized maintenance personnel.

15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.

16. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.

17. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.

18. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment.

19. Please take off the protective cover before using.

20. This product complies with ROHS, CE, KC, PSE and FCC certification, please refer to the relevant national standards for use and operation.

21. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction.

22. Some products have built-in lithium batteries. Please use specified chargers, and use them within a proper range of the specified voltage and temperature according to the correct operating instructions.

23. Some products are battery powered. Do not use any batteries, power sources or accessories not specified in the instructions for such products. Keep batteries and other accessories out of the reach of children and infants. In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns.

24. Continued use could result in fire, electric shock, or burns. Do not use any deformed or modified batteries. Do not disassemble or modify this product or battery. Do not heat or solder the battery. Keep the battery away from fire or water. Do not incorrectly insert the positive and negative ends of batteries, or mix old and new batteries or batteries of different types together

25. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty.

26. lf it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance.

27. Machine failures caused by non-standard operation are not covered by the warranty. keep these instructions!

IMPORTANT SAFETY INSTRUCTIONS

When using your photographic equipment, basic safety precautions should always be followed, including the following:

1. Read and understand all instructions before using.
2. Close supervision is necessary when any appliance is used by or near children. Do not leave the appliance unattended while in use.
3. Care must be taken as burns can occur from touching hot parts.
4. The appliance switch is provided with the symbols O indicating off and 1 indicating on. The symbols and may be used for this purpose.
5. Do not operate the appliance with a damaged cord or if the appliance has been dropped or damaged – until it has been examined by a qualified serviceman.
6. Position the cord so that it will not be tripped over, pulled, or contact with hot surfaces.
7. If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.
8. Always unplug appliances from the electrical outlet before cleaning and servicing and when not in use. Never yank the cord to pull the plug from the outlet. Grasp the plug and pull to disconnect.
9. Let the appliance cool completely before putting away. Loop the cord loosely around the appliance when storing.
10. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.
11. To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified serviceman when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is used subsequently.
12. The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.
13. Connect this appliance to a grounded outlet
14. Disconnect this unit from its source of supply before replacing the projection lamp.
15. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

Foreword

Thank you for purchasing!
Godox M200D/M300D is a LED Light product with superior performance. It has a separation design of light body and controller,high brightness, low consumption, high power, ultra-high CRI and various dimming curves functions, quite suitable for large photo studios, broadcast studios, outdoor or large- scale field scenes.

Features:

• Strong power to create bright light output.
• 0%-100% stepless brightness adjustment controls the brightness in subtle scenes.
• 4 dimming curves: linear, S-curve, exponential, and logarithmic.
• Bowens mount is perfectly compatible with more optical accessories.
• Various professional control methods: Bluetooth control/DMX57 2 remote control/2.4G wireless control.
• Super high color rendering index: CRla96, TLCla97
• 12 simulated light effects: flash, lightning, TV, broken bulb, etc.
• Two power supply methods: AC power supply (7 OOV~240V)and V-mount battery power supply (7 4.8V or 26V).
• The side with yellow battery removal button supports unilateral power supply.
• 2.4 inches TFT panel,4 buttons, 7 knob, clear UI interface.

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.

• Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.

• Keep out of reach of children.

• As this product do not have a waterproof function, please take measures of waterproofing in rainy or damp environment.

• Do not leave or store the product if the ambient temperature reads over 40° C.

• Do not use the product in the presence of flammable gases, chemicals and other similar materials.
  CAUTION: Hot parts! When the product is always on and flickering, please do not touch the high-temperature part of the LED head.

• When replacing product accessories. please turn off the LED light and perform a cold cut.

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

• The lamp shall be changed if it has become damaged or thermally deformed.

• The luminaire is intended for professional use only.

Name of Body

Light Body

1. Light Body Screen Print
2. Bowens Mount
3. LED Bead
4. Metal U-bracket
5. Mount Fixing Pusher
6. DC INPUT Port
7. Handle Direction Adjustment Button
8. Locking handle
9. Sleeve Knob

Controller

1. Black Battery Removal Button
2. V-mount Battery Box
3. AC INPUT Port
4. 48V DC Port
5. Yellow Battery Removal Button
6. Fan Switch Button
7. FX Button
8. Menu Button
9. Power Switch Button
10. SET AdJustment Knob
11. DC OUTPUT Port
12. DMX IN XLR Port
13. DMX OUT XLR Port

Remote Control (Separately Sold Accessory)

1. Power Switch Button
2. SET Setting Button
3. Reduction Button
4. CH/GR Button
5. lncrease Button
6. RST-Reset Mark(Press Reduction Button and Increase Button simultaneously to reset)

What’s in the Box

(M300D/M200D)

Separately Sold Accessories

Better shooting effects and using experience matched with following accessories: Fresnel Attachment for COB LED lights, RC-A6 Remote Control.Safety Wire Rope and Spotlight Attachment.

Installation and Disassembly Guide

Connect the Controller and Light Body

Press and hold the spring latch button of the connecting cord, insert the connecting cord into the DC INTPUT Port of the light body, insert the other end of the connecting cord into the DC OUTPUT Port of the controller to complete the connection.

Mount on the tripod

Adjust the light body to a proper angle. rotate the screw of sleeve knob to install the light body on the tripod, then rotate the screw of sleeve knob to fix the light body on the tripod.
The inclination angle of the light body could be adjusted by loosening the bracket angle adJustment handle and then screwing down the handle afterwards.
Note: The tripod belongs to separately sold accessories.
Tips: Press the handle direction adjust­ment button to adjust the handle by 360′.

Mount on the light stand

Loosen the handle of the controller clamp, then insert the light stand and rotate the handle to tighten.Finally, insert the V port of the controller into the clamp slot.
Tip : Press and hold the mount fixing pusher can easily remove the controller.

Installation and disassembly the lamp cover

Installation : Press the Mount Fixing pusher top-down, put the lamp cover on Bowens Mount, and rotate clockwise to tighten it.
Disassembly : Press the Mount Fixing pusher top-down, then rotate counter­clockwise to remove it.
Note: Make sure to remove the lamp cover before use to avoid overheating damage. Put on the lamp cover to protect the lamp when not in use.

Installation and disassembly the standard reflector

Installation: Press the Mount Fixing pusher top-down, put the reflector on Bowens Mount, and rotate clockwise to tighten it.
Disassembly: Press the Mount Fixing pusher top-down, then rotate counter­clockwise to remove it.

Connect to DMX Controller

The Connection operation diagram of Controller and OMX Controller is as follows:

Power Supply

AC Power Supply

Note : Please press the latch button when installing or disassembling the power cord and connecting cord.

V-mount battery power supply

Note: The light can be supplied by 14.BV or 26V V-mount battery. Only the side with yellow battery removal button supports unilateral charging, one with. When it is powered by two batteries and one of which is low, the device still can’t work normally even if the other one is full. The corresponding battery icon will blink in low battery mode. It is recommended to check whether both batteries have sufficient power when using two batteries.

Display Screen

Controller Operation Instruction

Turn On/Off
Press the controller Button for 1 second after connecting to the power supply to turn on or off.

Brightness Adjustment

Turn the SET adjustment knob on the main interface to adjust brightness from 0% to 100%, with an increment of 1 % in each level. Rotate clockwise to increase brightness, and counterclock­wise to decrease brightness. The brightness will increase or decrease by 1 % unit in normal rotation speed; and increase or decrease by 1 0% unit in rapid rotation speed.
Note : Short press the SIT adjustment knob once in main interface can turn off the light brightness, press again to resume the light brightness.

Menu Setting

• Short press< MENU> Menu Button to enter the menu interface, displayed in order with Wireless, Bluetooth, DMX, Fan, Dimmer, Screen Bright, Language, Reset, Version & Upgrade.
• Turn and short press the SET adjustment knob on the menu interface to select and enter the corresponding setting options interface.

Wireless

The Wireless interface is displayed in order with Wireless Switch, Channel, Group and ID. Short press & turn the SET adJustment knob to complete the settings of Wireless Switch, Channel, Group and ID.

Bluetooth

• The Bluetooth interface is displayed in order with Bluetooth Switch, Reset and MAC Code.
• Short press & turn the SET adjustment knob to complete the settings of Bluetooth Switch and Bluetooth Reset.
• For more smartphone APP operations, please open the “help” in “Godox­Light” APP to gain detailed guidance.

Note : the APP can be used directly on the firstly installed device (smartphone or tablet). When changing to other mobile device, the light shall be reset before the normal usage of APP.

DMX

The OMX Setting interface is displayed with Address. Turn the SET adjustment knob to choose address from OFF or 1-512, the light will be in OMX OFF or ON mode respectively. Afterwards, short press the SET adjustment knob to return to the previous menu interface.

DMX Practical Form

Fan

Turn the SET adjustment knob on the Fan interface to choose from AUTO, OFF, LOW, HIGH modes.
Note : Enter mute mode when turning off the fan.Short press the fan switch button to turn on or turn off the fan.

Dimmer
Turn the SET adjustment knob on the Dimmer interface to choose linear/S-curve/exponential/ logarithmic dimming curve.

Screen Bright
Turn the SET adjustment knob on the Screen Bright interface to choose 1, 2, 3 levels of screen brightness.

Language

Turn the SET adjustment knob on the Language interface to choose English or Simplified Chinese.

Reset
Turn the SET adjustment knob on the Reset interface to choose “Yes” or “No” and short press to confirm. If you choose “Yes”, the system will initiate resetting program and resetting progress bar is displayed on the screen, after which it will return to the main interface.

Version & Upgrade
The Version Code displayed on the Version & Upgrade interface is the firmware version of the product

Light Effect Setting

Short press <i/FX> button to enter FX Light Effect interface, turn the SET adjustment knob to choose flash, lightning, broken bulb or TV scenes.
Note : Short press the SET adjustment knob to change the rate and adjust brightness after choosing one of the above Light Effects.

Tip : Long press the< i/FX> Button for 3 seconds to lock/unlock the panel.

Connecting Cord Issue
When the connecting cord is not correctly connected to the light or controller, a separated icon of connecting cord and device is displayed on the panel. Please check the connecting ports of the controller and light.

Switch from AC Power Supply to V-Mount Battery Power Supply

Unplug the power cord and install V-mount battery then turn on the product

Note : If you install the V-mount battery before unplugging the power cord, and the brightness value is set higher than the maximum brightness that the battery can be turned on, then you switch to V-mount battery power supply by unplugging the power cord, the light and the controller will automatically power off The machine can only resume mormal operation after reboot

Maximum Brightness of M200D in Different States

CCT mode: Maximum Brightness(%) in Auto Cooling Mode or High-Speed Cooling Mode when supplied by V-mount battery

CCT mode: Maximum Brightness (%) in Fan Off Mode when supplied by V-mount battery

CCT mode : Maximum Brightness (%) in Low-Speed Cooling Mode when supplied by V-mount battery

CCT mode : Maximum Brightness (%) in different Fan Mode when supplied by AC power

FX mode : Maximum Brightness (%) in different Fan Mode when supplied by AC power

FX mode : Maximum Brightness (%) in different Fan Mode when supplied by V-mount battery

l 4.8V(single)| 40%| 20%| 40%| 40%|
---|---|---|---|---|---
14.8V+26V| 100%| 20%|  | 60%| 100%|
26V(double)| 100%| 20%|  | 60%| 100%|

Maximum Brightness of M300D in Different States

CCT mode: Maximum Brightness (%) in Auto Cooling Mode or High-Speed Cooling Mode when supplied by V-mount battery

CCT mode: Maximum Brightness (%) in Fan Off Mode when supplied by V-mount battery

CCT mode: Maximum Brightness (%) in Low-Speed Cooling Mode when supplied by V-mount battery

CCT mode: Maximum Brightness (%) in different Fan Mode when supplied by AC power

FX mode: Maximum Brightness (%) in different Fan Mode when supplied by AC power

FX mode : Maximum Brightness (%) in different Fan Mode when supplied by V-mount battery

• 14.SV(single)              30%               25%                    30%                                 30%
•   14.SV(double)             60%             25%                  60%                                60%
• 26V(single)                60%               25% 60%                     60%
• 14.8V+26V                90%         25%            60%                     90% ****
• 26V(double)              100%            25%                  60%                              100%

Note : The dimming curve is not adjustable in FX mode, it is linear in defaultThe above data is based on 26V 270Wh 10.5Ah battery and 14.BV l 50Wh 10.2Ah battery

Software Upgrade

1. Download the new firmware to the U disk from the official website (http://www.godox.com.cn/Downloads.html).
2. Turn off the LED light. Insert the U disk with new firmware into the USB upgrade port.
3. Turn on the LED Light, and it will automatically enter the upgrading interface ..
4. lt will return to main interface after completion.

Notes:

1. New firmware must be downloaded from the official website, and keep only one BIN file in the root directory of the USB disk.
2. The USB port can only support the firmware upgrade function.

Over-Temperature Protection

If the temperature of the light body is too high, the Over-Temperature Protection icon flashes on the main interface, the light body can be used normally.
If the temperature of the light body exceeds the limit of Over-Temperature Protection, the Over-Temperature Protection icon flashes on the main interface and the screen works properly after the light goes out in 3 seconds. When the temperature decreases to 50 ° C, the Over-Temperature Protection icon disappears, then the light body can resume working.

Fan Troubleshooting

If & icon appeared and blinking and fan off icon is also appeared on the display, It might be the fan failure. Please contact with customer service.

Maintenance

• This product, except consumables e.g. adapter and power cable, is supported with a one-year warranty.
• Maintenance of the light must be performed by our authorized maintenance depart­ment which can provide original accessories.
• Unauthorized service will void the warranty.
• If the product breaks down or gets wet, please do not use it until repaired by profes­sionals.
• If there is anything abnormal during LED light’ s working, please turn it off immedi­ately and identify the reasons.

llluminance Testing Data

M200D

Testing Conditions| llluminance

Unit

| lm| 2m| 3m

Bare lamp

| lux

fc

| 8430

784

| 2210

205

| 1080

100

With reflector| lux| 98500| 20500| 8850
 | fc| 9151| 1904| 822

Note : The above tests are all based on the condition of 100% brightness.

M300D|
---|---
Testing Conditions| llluminance Testing Data| lm| 2m| 3m

Bare lamp

| lux

fc

| 12300

1140

| 3190

293

| 1540

143

With reflector

| lux

fc

| 99100

9200

| 21700| 8980
1960| 835

Technical Data

Bluetooth APP

Dimming Curve| 4 types: linear/S-curve/

exponential/logarithmic

Mute Mode| YES
2.4G Wireless Control Distance| =60m
Bluetooth Transmission Distance| =30m
Display Screen| 2.4 inches
Light Body Dimension| 425.3•232.3•141.7mm
Controller Dimension| 270.4•123.6•132mm
Light Body Weight| =3.03kg
Controller Weight| =2.74kg
Bluetooth Transmission Frequency| 2402.00-2480.00MHz
Maximum Transmit Power| 5dbm

Maintenance

• This product, except consumables e.g. cable, is supported with a one-year warranty.
• Avoid sudden impacts and the product should be dedusted regularly.
• Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories.
• Unauthorized service will void the warranty.
• If the product had failures or was wetted, do not use it until it is repaired by professionals.
• Changes made to the specifications or designs may not be reflected in this manual.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: {1) This device may not cause harmful interference, and {2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Declaration of Conformity:

GODOX Photo Equipment Co,Ltd. hereby declares that the This equipment are in compliance with the essential requirements and other relevant provisions of EU Directive 2014/53/EU. They are allowed to be used in all EU member states.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you

Applicable Products

The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period

The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases: (l). The product or accessory has expired its warranty period;@. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;®· Breakage or damage caused by non- authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;@. The original identifying information of product or accessory is modified, alternated, or removed;@. No valid warranty card;®. Breakage or damage caused by using illegally authorized, nonstan­dard or non-public released software;®· Breakage or damage caused by force majeure or accident;®. Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consump­tion are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type| Name| Maintenance Period(month)| Warranty Service Type
---|---|---|---
Parts| Circuit Board|  | Customer sends the product to designated site
 | Battery| 3| Customer sends the product to designated site
 | Electrical parts e.g.battery charger, power cord, sync cable, etc.| 72| The customer sends the product to the designated site

Other Items

| Flash tube, modeling lamp, lamp body, lamp cover, locking device, package, etc| NO|

Without warranty

Godox After-sale Service Call 0755-29609320-8062

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>