Amper UPP-2400N-O Portable Power Station User Manual

Amper UPP-2400N-O Portable Power Station

UPP-2400N-O

General Description

This product is a high-end fashion off-grid portable power station, independently developed by Shenzhen Kerui Power Storage Technology Co., Ltd. Light and portable, stylish and generous, using automotive-grade LiFePO4 battery, safe, reliable, and durable; providing 11 0V /12V /SV AC and DC output, suitable for various equipment such as aerial drones, portable ventilators, medical equipment, mobile phones, tablets, laptops, desktop computers, small printers, various lamps, small fish tanks, photographic equipment, electric balance wheelbarrows, etc. It’ s convenient for users to use at home, travel, outdoor work, camping picnics, mountaineering adventures, etc.

Control and display

DC Input Characteristics

Paramete r

| Symbol| Unit| Typica l| ****

Remarks

---|---|---|---|---
Inp ut

range

| voltage| ****

Vin

| ****

Vdc

| ****

12 ~4 5

| The product is equipped with a  standard  24V/ 8.3a cha rge r,  int e llige nt ide nt ificatio n of MPPT, photovo lt a ic pane l input ca n support the maxim um open circuit voltage 45V curre nt

12A, two inde pe nde nt MPPT

Input

range

| curre nt| ****

lin

| ****

A

| ****

0~8.3

Ada pte r charging

t ime

| I| ****

Ho ur

| ****

5~7

| ****

2 chargers charging

Solar

charging time

| panel| ****

I

| ****

Ho ur

| ****

I

| The maximu m charging t ime

depends on the lig ht intensity and solar panel power

Maximum charg ing

inte rval time

| ****

I

| ****

month

| ****

I

| ****

Store when the re maining power is greater than 50%

Input port

| I| I| I| DC7909 fe male e n d , m idd le and

inne r r ing are positive, outer ring is

 |  |  |  | Negative

Two independent Anderson interfaces, the Anderson interface and DC7909 are in parallel

---|---|---|---|---

DC Output Characteristics

Car Charger Output Characteristics

Output voltage

range

| ****

Vo

| ****

Vdc

| ****

12

|
Output current

range

| ****

lo

| ****

A

| ****

10

|

Overload protection

| ****

I

| ****

A

| ****

11

| When the output current exceeds this current lim it, the output will be turned off. After the overload is released, the output must be restored by pressing the DC switch

manually.

Short circuit protection

| ****

I

| ****

I

| ****

I

| If   the   output   te rmina l,    wire   or    external   dev ice    is sho rt-circuited, the output port will stop output. When short-circuit is removed, you need to manually press the DC

switch to restore the output.

Output port| I| I| I| One ciga rett e lig ht e r output

DC5521 Output Characteristics

Output voltage

range

| ****

Vo

| ****

Vdc

| ****

12

|

Output cur rent range

| ****

lo

| ****

A

| ****

10

| Two DCs (5521) are output in parallel, a nd the tot a l current with the car charger (cigarette lig ht e r)

is less th a n 1OA.

Overload protection

| ****

I

| ****

A

| ****

11

| When the output current exceeds this current lim it, the output will be turned off. After t he ove rload is released, the output must be restored by pressing the DC sw itch

manually.

Short circu it protection

| ****

I

| ****

I

| ****

I

| If   the   output   terminal,   wire   or    exte rna l    dev  ice    is sho rt – c ircuite d,  the output  port  will  stop  output.  When sho rt- circuit is removed, you need to manually press the DC

switch to restore the output.

Output port| I| I| I| Two DC5521 pa ra lle l outputs

USB-A Output Characteristics

Output voltage range

| ****

Vo

| ****

Vdc

| 5.0| ****

The d efa ult output is 5V, the QC prot oco l is auto mat ical ly recog nized, and o ut putcorres pond ing vo ltag e,,

QC3.0/ QC2.0, FCP, SCP, AFC, MTKPE+2.0/1.1, App le2.4 A

9.0

12.0

Output current range

| ****

lo

| ****

A

| 3| @5.0V
2| @9.0V

1.5

| ****

@12.0V

Overload protection

| ****

I

| ****

w

| ****

18

| When the output power exceeds the maximum power, the output will be turned off. After the over-power state is released, you need to manually press the USB sw itch to

restore the output.

Short circuit protection

| ****

I

| ****

I

| ****

I

| When the output terminal, wire or external device is sho rt-circuited, the output port will stop output. Whe n

sho rt-circuit is removed, you need to manually press the

USB switch to restore the output.

Output port| I| I| I| Two USB-A in depe nde nt outputs

USB-C (PD60W) Output Characteristics

Output voltage range

| ****

Vo

| ****

Vdc

| 5.0| ****

Auto matica lly recognize the PD protocol and out put the corresponding voltag e . PD3.0, PD2.0, QC3.0, QC2.0, FCP, SCP, AFC, MTKPE+2.0/1.1, App le2.4 A,

9.0

12.0

15.0

20.0
Output current

range

| lo| ****

A

| 3|

Overload protection

| ****

I

| ****

A

| ****

3.3A

| If the output current exceeds this current limit point, the output will be turned off. After the over current is released,

re-plug the device to restore the output.

Short circuit protection

| ****

I

| ****

I

| ****

I

| If    the     output   te rminal,    wire   or   external  device     is s hort-circuited,  the  output   port   will  stop  output.   When sho rt- circuit is re moved, re- plug the dev ice to resume

output.

AC Output Characteristics

Output voltage

range

| ****

Vo

| ****

Vac

| ****

110

|
Output power| Po| w| 2400|
Peak output powe|  | w| 5000| Duration ;£200mS
Output AC

frequency

| ****

F

| ****

Hz

| ****

60

| ****

50HZ/60HZ can be set

Output AC

waveform

| I| I| I| ****

Sine wave

Overload protection

| ****

I

| ****

w

| ****

100%~1

10%

| If the output current e xcee ds the cur rent  limit for 1 min , the o ut put will be shut down. After the over cu rrent is removed,

manually press the AC switch to restore the output

Overload protection 2

| ****

I

| ****

w

| ****

110%~1

35%

| If the output current exceeds the current limit for  20 seconds, the output will be shut down. After the over current is removed, manually press the AC switch to restore the

output

Short circuit protection

| ****

I

| ****

I

| ****

I

| If   the   output    terminal,    wire    or    external    device    is sho rt-circuite d , the  output  port  will   stop  output.  When sho rt- circuit is removed, you need to manually press the AC

switch to restore the output.

Output port| I| I| I| AC 2 PI NAm e ric a n so c ke t, 3 pa ra lle l o ut put

LED Lighting Output Characteristics

Battery Pack Parameters

System Protection Function

The high-temperature protection of charging

restored

| I| oc| 55|
Charge low temperature protection| I| oc| -10|
Charge low-temperature protection restored| I| oc| 0|
Discharge high-temperature protection| I| oc| 65|
Discharge high temperature protectio n restored| I| oc| 55|
Discharge low temperature protection| I| oc| -20|
Discharge lo w temperature protection restored| I| oc| -10|
Overload protection| I| w| I| See ove rload protect io n for ports
Short circuit protection| I| I| I| See

ports

| short| circuit| protection| for

Total power protect io n

| ****

I

| ****

w

| ****

2600

| DC o ut put is prefe rred when the AC and DC are lo a ded  at the  same  t ime. If the AC load exceeds

2600VA, the AC is disconnected.

Environmental Requirements

Working temperature (ambient

temperature)

|  | oc| 0| 25| 40|
Working humidity|  |  | 10%| —| 90%|
Storage temperature|  | oc| -20| 25| 65|
---|---|---|---|---|---|---
Storage humid ity|  |  | 5%| —| 95%|
Altitude|  | m| -50| —| 3000|
Cooling method|  |  | Fan forced coo ling|

Other Characteristics

Para m ete r

| Symbo l| Unit| M i n . I   Typ    i  ca     l I Max.| ****

Re m a r ks

---|---|---|---|---

The life t ime

| ****

Lf

| ****

year

| ****

3

|
Mean inte rval failure

time estimation

| ****

MTBF

| ****

hours

| ****

200000

| ****

Ta 25°C (M IL- HDBK- 217 F)

Weight| N.W| g| I    20700 I|

Dime ns io n

| ****

DIM .

| ****

mm (inch)

| LW H

16.510.612 .3 in (420270313 mm

)

|

Remarks: Unless otherwise specified, all the above parameters are measured under the fully loaded state of the product and at 25°C.

Safety Regulation

Electromagnetic Compatibility

Safety Test Projects

Fault code

EO0

| AC short circuit

protection

| AC+ Red Warning icon blinking, no

output is dis p layed

| You need to manually press the AC

power button to recover

E01

| ****

Output overload protect io n

| AC and DC ICONS plus red warning

ICONS  blink,  and    no output is displayed

| The function icon represents where

to overload. The overload protection needs to be manually restored

E02

| ****

Battery low voltage protection

| ****

The function icon blinks, and the corresponding port has no output

| After               protection,               restart corresponding function      keys     to

restore functions

E03

| ****

System overload when AC and DC are used at the same time

| ****

The AC icon blinks, and the AC has no output

| When the system concurrently uses more than 2000W, turn off the AC output or reduce the AC load to ensure that the DC output power

supply is preferred

E04

| ****

Inverter fault

| ****

AC+ Red Warning icon blinking, no output is displayed

| The inverter voltage is too  high  or too low . The load current IS abnormal. Hardware sampling bias is

abnormal

E05

| ****

BMSfault

| The red warning icon blinks. Each function icon cannot be on, and no output IS generated for each

function

| ****

The communication between the charge protection board fails, and the battery temperature is too high

Accessories List

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>