testo 0554 3004 Bluetooth Connector User Manual

0554 3004 Bluetooth Connector
User Manual

0554 3004 Bluetooth Connector

Free download t300 manual

https://www.testo.com/download-center

Watch the Video:https://www.testo.com/300

Approval and Certification

The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner has the obligation to adhere to these regulations and prerequisites for use, and acknowledges that the re-sale, export, import etc. in particular in countries without wireless permits, is his responsibility.

The EU Declaration of Conformity can be found on the testo homepagewww.testo.com under the product specific downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK), Germany (DE),
Estonia
(EE), Finland (FI), France (FR), Greece (GR), Ireland (IE), Italy
(IT), Latvia (LV), Lithuania (LT), Luxembourg (LU), Malta (MT),
Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Sweden   (SE), Slovakia (SK), Slovenia (SI),
Spain (ES), Czech Republic (CZ), Hungary (HU), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
WEEE  Reg. no.: DE 75334352
Japan| 201-210206
See Japan Information
United Kingdom
(GB)| **
The UK Declaration of Conformity can be found on the testo homepagewww.testo.com under the product specific downloads.
USA|
FCC ID: WAF-05543004
See FCC Warnings
Bluetooth® Information| Feature| Values
radio type| Bluetooth® Low
Energy (BLE) 5.0
company| Lerida – LSD4BT-E92
RF Band| BT LE: 2402 – 2480MHz
power output| 4 dBm
Antenna gain| 0 dBi
Bluetooth® SIG Listing| Declaration ID| D051220
member company| Testo SE & Co. KGaA

IC Warnings

CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian ICES-003.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Caution: Radio Frequency Radiation Exposure
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets the IC radio frequency (RF) Exposure Guidelines.
FCC Warnings
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface.
This is to ensure continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Shielded interface cable must be used in order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. tion to ensure compliance with RF exposure requirement.

References

• Testo, Inc | Leading innovator in state-of-the-art measuring technology
• The Next-Gen testo 300 | Testo, Inc
• Testo international | Professionelle Messgeräte und Messsysteme des Weltmarktführer | Testo SE & Co. KGaA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>