Godox ES30 E-sport LED Light Instruction Manual

Godox ES30 E-sport LED Light Instruction Manual

Safety Instructions and Attentions

First of all, as the most basic principle. This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:

1. Before use. please read and understand these instructions and attentions
2. Professranal lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps
3. This lighting product is not ordinary lighting product and cannot be used for general Fighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product
4. When the lamp is on, it must be used with care. Do not touch high-temperature parts. such as LED lamp beads, to avoid burns.
5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use. and see a doctor immediately.
6. 11 the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the tamp bead in time to avoid accidents.
7. This product is only suitable for use in • 10 to 40 operating environment and normal humidity environment.
8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use.
9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.
10. 8 an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result.
11. Some products have long power cords. please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage. or trip on-site personnel. Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory. gasoline.
12. 8e sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power – off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet
13. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents.
14. 0o not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel.
15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.
16. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.
17. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.
18. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment
19. Please take off the protective cover before using.
20. This product complies with ROHS,CE and FCC certification, please refer to the relevant national standards for use and operation.
21. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction
22. Some products have built-in lithium batteries. Please use specified chargers, and use them within a proper range of the specified voltage and temperature according to the correct operating instructions.
23. Some products are battery powered. Do not use any battenes, power sources or accessories not specified in the instructions for such products. Keep batteries and other accessories out of the reach of children and infants In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns. Continued use could result in fire, electric shock, or burns. Do not use any deformed or modified batteries. Do not disassemble or modify this product or battery. Do not heat or solder the battery. Keep the battery away from fire or water Do not incorrectly insert the positive and negative ends of batteries. or mix old and new batteries or batteries of different types together. 24.0ne-year warranty period accessories such as consumable batteries, adapters, power cords, etc are not covered by this warranty
24. 11 it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged far maintenance.
25. Machine failures caused by non-standard operation are not covered by the warranty

keep these Instructions

Foreword
Thank you for purchasing Godox product! E-sport LED Light ES30 supports free brightness and color temperature adjustment. Bluetooth APP wireless control. It provides lighting for electronic sports, live streaming. make up and video recording with compact body. easy operation and great portability.

Main Feature

• Soft and even light effects cater for live streaming
• All-in-one light board design creates soft light.
• Support Bluetooth wireless control via smariphone APP
• Precise and stepless brightness adjustment from 0% to 100%
• Wide color temperature range from 2800K to 6500K.

Warning

Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
Always keep this product dry. Do not use in rain or in damp conditions.
Do not leave or store the unit if the ambient temperature reads over 401C Use a dedicated charger and use it within the specified voltage and temperature range according to the instructions.

Structure of  Product

1.  Light board
2. Thermovent 1
3. Thermovent 2
4. LED beads
5. Power switch
6. Bracket mounting hole
7. DC input port
8. LCD panel
9. DIN/ adjust dial
10. CCT/Bluetooth set dial

Item List of  ES30 Kit 1

Power supply

Power supply by adapter Adapter Input: 100-240V-50/60Hz 1.0A Adapter Output: 14V/2.5A

Operation Instruction

1. Power on/Power off
   Insert the adapter into DC port. Press the power switch button to power it on or off.

2. Brightness Adjustment
   Turn the DIM adjust dial leftwards to decrease the brightness value while rightwards to increase from 0% to 100%, with a change of 1 unit in normal speed and 10 units in quick speed. Short press the DIM adjust dial to set the brightness value to 0, the light will be turned off, short press again can restore to the previous brightness value.
   

3. Color Temperature Adjustment
   Turn the CCT/Bluetooth set dial leftwards to decrease the color temperature value while rightwards to increase from 2800K to 6500K, with a change of 100 units in normal speed and 500 units in quick speed.
   

Bluetooth code:
Short press the CCT/Bluetooth set dial to display the Bluetooth code on the LCD panel, press again it will not display.

Bluetooth reset:
Long press the CCT/Bluetooth set dial to make the Bluetooth icon blinks, which means the Bluetooth is resetting. When the icon stops blinking, the resetting is completed.

Bluetooth connection :

1. Scan the QR code to download the “Godox Light” smartphone APP (can be used by Android and Apple system).

2. Power the device on and turn on the smartphone APP to pair or connect. For more smartphone APP operations, please open the “help” in APP to gain detailed guidance.

Note: The first mobile device (mobile phone or tablet) can directly use the APP to control the light body. When replacing other mobile devices (mobile phones or tablets), the lamp body can be connected normally after Bluetooth reset.

IIIuminance Data

ES30

CCT| Unit| 0.5m| 1 m| 2m
2800K| lux| 1190| 315| 87.1
fc| 111| 29.3| 8
3200K| lux| 1510| 399| 110
fc| 140| 37.1| 10.2
4300K| lux| 2280| 602| 167
fc| 212| 56| 15.5
5600K| lux| 1550| 408| 113
fc| 144| 37.9| 10.5
6500K| lux| 1330| 350| 96.9
fc| 123| 32.5| 9

Technical Data

Correctly use

Improper useˈwill overturn

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference. and
2. this device must accept any interference received. including interference that may cause undesired operation

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Note: This equipment has been tested and found to comply with the limits for a Class B dgital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resdential installation. This equipment generates uses and can radiate radio frequency energy and f not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.. the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and recener.
• Connect the equipment into an outlet on a circuit d fferent from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help To maintain compliance with FCC’s RF Exposure guidelines This equipment should be installed and operated with minimum distance between 20cm the radiator your body

Declaration of Conformity

GO COX Photo Equipment Cot. td hereby declares that the This equipment are in compliance with the essential requirements and other relevant provisions of EU Directive 2014/53/EU. They are a-lowed to be used in all EU member states For more information of DoC. Please click this web link.httpliwww.godox.com/DOC/ Godox_ES30_DOC.pdf

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note

(Applicable Products)
The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.

( Warranty Period )
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered onthe warranty card when buying the product.

( How to Get the Maintenance Service )
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

( Inapplicable Cases )
The guarantee and service offered by this document are not applicable in the following cases: ®. The product or accessory has expired its warranty period; C) .Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; 0 . Breakage or damage caused by non- authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; ® . The original identifying information of product or accessory is modified, alternated, or removed; ®. No valid warranty card; ®. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; C) . Breakage or damage caused by force majeure or accident; C) Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Customer sends the product to designated site
Other Items| Flash tube, modeling lamp, lamp body, lamp cover, locking device, package, etc.| No| Without warranty

GODOX Photo Equipment Co., Ltd. Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’ an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail:godox@godox.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>