EASEPAL ENTERPRISES ER101A Massage Pillow Instruction Manual
- June 9, 2024
- EASEPAL ENTERPRISES
Table of Contents
EASEPAL ENTERPRISES ER101A Massage Pillow
Massage Pillow Operating Instructions
On/Off Button：
- Press and hold 3S the On/Off button to start the product, it defaults forward direction +heating function, this button lights red;
- Touch On/Off button the first time, it turns to be forward direction, the heating function turn off, this button lights blue;
- Touch On/Off button the second time, it turns to be reverse direction, the heating function turn on, this button lights red.
- Touch On/Off button the third time, it turns to be reverse direction, the heating function turn off, this button lights blue.
- Operation for touch the On/Off button in cycle and it hold for 3 seconds to turn off.
If you want to enter the 2/3/4 mode immediately after power-on, you can set the corresponding pattern.
**
Heat Button**
Press and hold for 3 seconds to turn on the heating function, press and hold
for 3 seconds to turn off the heating function, and it cycle in turn.
Note: Turn on this button to stop kneading massage. Similarly, when the
kneading function turned on, the heating function stops
Note: When the product is charging, the On/Off button with blue breathing
light flashes, and the blue light goes out when it is full. When the battery
is low, the indicator will flash. Please charge it in time.
3. Bluetooth using instructions:
1) Search “ErgoRelax” in APP STORE or Goodle Play to download the page
2) In order to give you a better experience, the application may be
updated in the
future and different versions of appearance may be available.
Step 1. Register your account and your email address
Step 2. Log in to your account
Step 3. Add a device
Step 4. Add your massage products
Step5. Connect Bluetooth and select the product Bluetooth number
(ERXXXXXXXX)
Step 6. Click any mode you want to massage
Step 7. Click * My Favorite Mode
Step 8. Drag your favorite mode to the box
FCC Statement:
Any Changes or modifications not expressly approved by the party responsible
for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with FCC radiation exposure requirement set forth for
an uncontrolled environment.
Note: Th is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tty to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. -
Consu lt the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>