Lunzn Technogy Turing I01 4K Advertising Media Player Box User Manual
- June 9, 2024
- Lunzn Technogy
Table of Contents
Lunzn Technogy Turing I01 4K Advertising Media Player Box
Product Interface Details
Product Package
NO. NAME QUANTITY
1| Media Player| 1
2| Remote Controller| 1
3| Power Adaptor| 1
4| HDMI Cable| 1
5| Etherlan Cable| 1
6| Product Manual| 1
(If some pictures are different, the actual products shall prevail. Please read this manual carefully before using the product. Please keep it for future reference.)
Get started
Installing and setting up the device
The steps described below is for connection through a HDMI cable, if an AV
cable is used, please connect it to AV (yellow, red, white) ports respectively
on TV.
- Connect one end of the supplied HDMI cable to the Media Player Box, the other end to a HDMI port on TV or other display device.
- Use TV remote controller (the signal source key) to select right signal path for the HDMI port connected. There are normally several HDMI ports on a TV, and the connection can be enabled only when the right signal path is selected. If an AV cable is used, please select AV port instead.
- Connect the AC power adapter（12V/1.5A）to the box and the other end to the power socket, turn on the box by pressing the power key until the LED indicator lights up, wait the box home page show in the TV.
Connect to internet
-
Wireless connection
Go to setting, WI-FI, click on the desired wifi hot spot, and input password of the wireless router for connection (A wifi icon pops up on the status bar after connection).
Note: Please ensure that the wireless router has access to external internet. -
Wired connection
- a) Plug one end of the net work cable in the LAN port on the device, and the other end to the router.
- b) Go to setting turn on ethernet, after connection, an icon of cabled connection appears on top-right conner of the status bar.
Install / Uninstall APK
- Install APK
- Copy the downloaded APK to USB flash drive, hard drive, etc, and connect it to the box.
- Chick “All APPs” — “Filemanager”, find USB, select the desired APK, and click on Install.
- Uninstall APK
- Go to “All Apps”, Click on the icon of the APK you want to delete.
- Click “menu” key on remote controller.
- Click “uninstall” to remove the APK.
FCC
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>