Lunzn Technogy YM05 Media Player User Manual
- June 9, 2024
- Lunzn Technogy
Table of Contents
MEDIA PLAYER PRODUCT MANUAL YMOS
Product Interface Details
Product Package
| NO | NAME | QUANTITY |
|---|---|---|
| 1 | Media Player Box | 1 |
| 2 | Remote Controller | 1 |
| 3 | Power Adaptor | 1 |
| 4 | HDMI Cable | 1 |
| 5 | Etherlan Cable | 1 |
| 6 | Product Manual | 1 |
If some pictures are different. the actual products shall prevail. Please read this manual carefully before using the product Please keep it for future reference.)
Get started
Installing and setting up the device
The steps described below is for connection through a HDMI cable, if an Al
cable is used. please connect it to AV (yellow, red, white) ports respectively
on TV.
- Connect one end of the supplied HMI cable to the Media Player Box. the other end to a HDMI port on TV or other display device.
- Use TV remote controller (the signal source key) to select right signal path for the HDMI port connected. There are normally several HDMI ports on a TV, and the connection can be enabled only when the right signal path is selected. If an AV cable is used, please select AV port instead.
- Connect the AC power adapter ( 12V/1A) to the box and the other end to the power socket, turn on the box by pressing the power key until the LED indicator lights up. wait the box home page show in the TV.
Connect to intemet
-
Wireless connection Go to setting, WI-FI, click on the desired wifi hot spot, and input password of the wireless router for connection (A wifi icon pops up on the status bar after connection).
Note: Please ensure that the wireless router has access to external Internet. -
Wired connection a) Plug one end of the net work cable in the LAN port on the device, and the other end to the router. b) Go to setting turn on ethernet, after connection, an icon of cabled connection appears on top-right conner of the status bar
Install / Uninstall APK
- Install APK Copy down!oaded APK to USB flash drive, hard drive, etc, and connect it to the box Go to “Filemanage”, find USB, select the desired APK, and click on install.
- Uninstall APK ‘.1; Go to setting — APK Manage, a list of installed APK pops up.
Click on the icon of the APK to show a delete box.
Click on ‘uninstall” to remove the APK.
FCC WARNING
Ths device complies with part 15 of the FCC Rues. Cperaton s subject to `ollowing two conditions:
- this device may not cause harmful nterference. and
- this device must accept any interference rece ved. including nterference that may cause undesired operation. Any changes or modficatons not expressly approved by the party responsible for compliance could void the user’s authority tc operate the equpinent
NOTE: This equipment has been tested and found to comply with the :lints for a Class B digital device, pursuant to Part 15 of the FCC Rues. These limits are designed to provide reasonable protection against harmful interference in a residential instal:anon. This equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the nstructions. may cause harmful interference to radio communicators. However, there rs no guarantee that interference will not occur in a particular insta ation. It this equipment does cause harmful interference to radio or televison reception, which can be determined by turning the equipment of and on. the user is encouraged to try to correct the nterference by one or more of the following measures:
- Recrent or relocate the temving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit tifferent from that to which the receiver is connected
- Consult the dealer or an experienced radiorV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines. This equipment should be installed and operated wdh rin mum 20cm distance between the radiator and your body Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>