hama 118685 Projector Mount Instruction Manual
- June 4, 2024
- Hama
Table of Contents
- hama 118685 Projector Mount
- Required tools
- Installation kit
- Explanation of Warning Symbols and Notes
- Package Contents
- Safety Notes
- Intended use and specifications
- Installation requirements and installation
- Setting and maintenance
- Warranty Disclaimer
- Terms of waranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hama 118685 Projector Mount
Thank you for choosing aHama product.
Take your time and read the following instructions and information
completely.Please keep these instructions in asafe place for future reference.
If you sell the device, please pass these operating instructions on to the new
owner.
Required tools
Installation kit
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
-
Projector bracket
-
Installation kit (see contents, Fig. 1)
-
These operating instructions
-
Note
Please check that the installation kit is complete beforeinstalling the bracket and ensurethat none of the parts arefaulty or damaged.
Safety Notes
Warning
-
Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
-
In some cases, the screws for attaching the terminal device to the product on the wall bracket aretoo long.
-
Please note that the supplied wall plugs arefor use with concrete brick and solid brick walls only.
-
Read the operating instructions for your terminal device beforeattempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
-
If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from aspecialised dealer.
-
If the installation surface on which the bracket is to be mounted is made of different materials or construction types to those specified, purchase suitable mounting materials from aspecialised dealer.
-
Never apply force during installation. This may damage your terminal device or the product.
-
If in doubt, have this product mounted by aqualified technician -donot attempt to mount it yourself!
-
Do not mount the product above locations wherepersons might linger.
-
Once you have mounted the product and the attached load, check that they are sufficiently secureand safe to use.
Youshould repeat this check at regular intervals (at least every three months). -
When doing so, ensurethat the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
-
Make surethat the product is loaded symmetrically.
-
During adjustment, ensurethat the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
-
Maintain the necessary safety clearance around the attached load (depending on the model).
-
In the event of damage to the product, remove the attached load and stop using the product.
Intended use and specifications
- The bracket is used for wall mounting projectors for non-commercial, private household use.
- The bracket is only intended for use within buildings.
- Use the bracket only for the intended purpose.
- Maximum load bearing capacity: 13.5 kg
- Distance of threaded holes:up to 320 mm
- Range of rotation: up to 360°
- Angle: up to –/+ 15°
- Distance to the ceiling:15 cm
Installation requirements and installation
Note
- Only mount the bracket with the help of asecond person. Get the support and help you need.
- Different end devices have different options for connecting cables and other devices. Beforeinstallation, ensurethat the necessary connections will still be accessible after installation.
- The same mounting kit is included with all of our TV brackets. Depending on the product and mounting type, you may not need to use the entiremounting kit. Unneeded screws and other small parts may be left over,even if the bracket is properly mounted. Keep the leftover parts and the operating instructions in asafe place, in case you might need them later on (e.g. should you move, sell the product, mount the bracket in adifferent location, buy adevice, etc.).
Warning
- Beforeinstalling the bracket, ensurethat the wall on which the television is to be mounted is suitable for the weight and make surethat no electrical wires, water,gas or other lines arelocated at the installation location.
- Please note that the provided wall anchors areonly approved for concrete and solid brick walls.
- Observe the other warnings and safety instructions.
- Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1ff.).
- During installation, securethe mounting screw in such away as to ensurethat the Bracket can still be rotated.
Setting and maintenance
Note
Only adjust the Bracket with the help of asecond person. Get the support and
help you need.
- Screws do not have to be loosened for rotating movement.
- To adjust the tilt angle, open the fastening screws on the support arm slightly (see Fig. 7), set the required tilt, and then securethe screws in place again.
- Check that the bracket is secureand safe to use at regular intervals (at least every three months). Only use water or standardhousehold cleaners for cleaning.
Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.
Terms of waranty
- HAMA GmbH &CoKGgrants you an extended manufacturer’swarranty for this product that covers the freedom from defects, usability, workmanship and durability of the materials used for the specified period of 10 years. Compatibility of the product with futurestandards for further developed hardwareisalso excluded.
- At the discretion of Hama GmbH &CoKG, valid warranty claims in this period will be resolved at no cost either by repair or replacement. The warranty period begins on the date of purchase of this product and is valid throughout the EU.
- The warranty you areentitled to is in addition to your statutory rights and does not affect them. The warranty does not cover damage caused by improper use, normal wear and tear,exposuretochemicals, force majeure, or modifications or repairs performed by yourself or thirdparties. Furthermore, this warranty does not cover accessories that arenot included with the product as standard(promotional parts).
- In the event of awarranty claim please write to us, enclosing proof of purchase, at Hama GmbH &CoKG, Dresdner Str. 9, 86653 Monheim, Germany.You arealso free to contact us at www.hama.de or by telephone on +49 (0)9091/502-0.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>