boAt AD170 Wireless Bluetooth Earbuds User Manual

boAt AD170 Wireless Bluetooth Earbuds

INTRODUCTION

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 170. Please consider this manual as your guiding map toward the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.

PACKAGE CONTENTS

1. 1 x Pair of TWS Earbuds
2. 1 x Charging Case
3. 1 x Type-C Charging Cable
4. 1 x Catalogue
5. 1 x User Manual
6. 1 x Warranty Card
7. 2 x Pair of Extra Earmufs x FAQ Card
8. 1x FAQ Card

OVERVIEW

1. Capacitive Touch Control (CTC)
2. Charging Port
3. Indicator Light

POWER ON (FIRST-TIME USER)

• Step 1: To switch the oarbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Courtesy of our IWP (Insta Wake N’ Pair) technology, the earbuds power on automatically, their LEDs begin to flash in blue for 2 seconds, they get connected and enter the connection mode.
  OR
  Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds.

• Step 2: After powering on, the earbuds enter the Connection Mode, indicated by LED flashes on the earbuds.
  CONNECTION MODE

• Stop 3: Turn on the Bluotooth functionality on your phone/media device and scan.

• Step 4: Search for Airdopes 170′ and pair accordingly Congratulations! Your earbuds are now connected successtully via Bluetooth.

Note

• Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure
• Airdopos 170 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range,

QUICK GLANCE AT FUNCTIONALITIES

SINGLE EARBUD USAGE

1. Step 1: Please note that both earbuds can be used in mono mode. Uso Smart/Manual Power On for switching on the desired earbud
2. Step 2: The selected earbud automatically enters the connection mode indicated by LED flashes
3. Stop 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 170’ to connect

Notes:

• To switch to Stereo mode, simply take out the other earbud from the case It will automatically power on and pair with the previously selected earbud, honce enabling Stereo usage.
• You cannot skip tracks or return to the previous tracks in Mono (single-earbud) mode.

CHARGING THE EARBUDS

1. Step 1: Please insert the earbuds back inside the charging case in the correct orientation and close the lid
2. Stop 2: Once the earbuds got fully charged, the charging case automatically switches off to save power, and the earbuds indicator turns off

Notes Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also. Please keep the lid of the charging case closed while charging.

CHARGE THE CASE

Step 1: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/power bank, etc.
White LED blinks continuously while the case is on charging When the case gets fully charged, it gets indicated by a solid white LED.

VOICE ASSISTANT

1. Step 1: Long touch the CTC on the left earbud for 3 seconds to activate the default smart voice assistant.
2. Step 2: The respective voice assistant screen pops up and you may place your commands at ease.

Tips: You may try out the following commands

• What is the weather?
• Play a song
• Set a reminder

Note: If the voice assistant doesn’t get triggered, then the functionality has to be first enabied via your media device settings

BASIC FUNCTIONS

• Voice Assistant: Long touch left CTC for 3 seconds to activate your default smart voice assistant
• Answer: Single tap the CTC on either earbud to answer an incoming call
• Hang Up/Reject Call: Double tap the CTC on either earbud to end roject call
• Play/Pause Music: Singio tap either earbud’s CTC to play or pause music
• Next Track: When playing music, double tap the right earbud’s CTC to skip to the next song
• Previous Track: When playing music, double tap the loft earbud’s CTC to return to the previous song
• Note Volume can only be controlled via the media device

BEAST MODE
Long touch the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST Mode. Once switched on, it gets notified via a sound prompt. Long touch the right CTC for 3 seconds once again, to turn it off and return to standard Music Modo Mado for the Gamers-By Gamers, BEAST Mode reduces the latency significantly and improves the overall gaming experience.

ENX TECH
Our ENx (Environmental Noise Cancellation) tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx” as the 4x mics are already equipped with the same and activated by default Deliver your voice without interruptions anywhere- traffic, railway stations, airports, workspace, literally anywhere.

SMART PoWER OFF

1. Step 1: After usage, remove both the earbuds from your ears
2. Step 2: Place the earbuds back into the charging case in correct oriontation and close the lid
   The earbuds automatically switch off (and enter charging mode)

MANUAL POWER OFF

1. Stop 1: Long touch both CTCs for 5 seconds to manually powor off the earbuds
2. Step 2: Once the earbuds get turned off, place them back inside the case and close the lid

FACTORY RESET

Perform the factory reset in case you feel any difficulty while operating your Airdopes.
NOTE: Before performing recent, clear “Airdopes 170” from pairing device history by forgetting device.

1. Step 1: Take out both earbuds from the charging case.
2. Step 2: Long touch both the CTCs for 5 seconds.
3. Step 3: Place the earbuds back inside the case, close the lid, and wait for 5 seconds.
4. Step 4: Take out the earbuds to perform fresh connection Congratulations! Your Airdopos 170 has been Reset.
5. 

SPECIFICATIONS

WARNING:

• Please follow the instructions to operate.
• Please don’t use the earbuds in 9xtrome temperatures.
• Please don’t use the product near water.
• Please keep the product away from heat sources, as the heat may damage it.
• Don’t jam the ports such as the charger port LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the earbud’s service life.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>